Jump to content
SAU Community

Recommended Posts

Ok need help peeps about to turbo my r34 na rb25de running auto ecu just converted to Manuel can i use auto na ecu and piggyback a emanage ecu for timing fuel and air etc seen people saying auto box gives out etc as ecu for box is 1 aswell but im manuel now? Do i need a nistune or no? Stock boost gtt injecters 255pump etc ?

received_1717788698341275.jpeg

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/
Share on other sites

Nistune would be smarter than any piggyback crap.  The NA ECU should be able to do what you need - doesn't matter that it was auto.  Nistune will actually help you to get rid of codes that the ECU will probably throw from not having the auto's TCU on-line.

If you have to buy injectors, don't buy stock DET injectors.  Buy some brand new Bosch injectors (or similar) from Scotty (or similar).

Any big pump will do.  The 255 is reasonable, but there are newer Walbros that better suit E85, for some future proofing.

If you do use Nistune, grab a Z32 AFM, or an R35 blade AFM and fit that instead.  No point hamstringing yourself with the NA RB25 AFM.

And upgrade the brakes.

And fit an LSD.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881579
Share on other sites

The emanage kit comes with loom etc all that and can plug straight into my laptop ..can i do that with a nistune? Looking fo cheap option as will get det soon so was thinking emanage n tune my self all under 500 where as nistune is 400ish yeah? Then pay for a tune?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881587
Share on other sites

11 hours ago, AngryRB said:

I run flex fulltime with no issues, i can check knock and sensors are working and is easy for my tuner to play with.

Does the job for $600.

You mean you run E85 full time.

PowerFC can't even cut power when you're above a particular load point, it can't even cut power when you've exceeded a particular engine water temperature.

I think you need to admit now that it is a pretty basic ECU.

Nistune can do full flex blending (PowerFC cannot), Nistune has basic engine protection (PowerFC will grenade your motor), Nistune you can vary your VCT (PowerFC you cannot), Nistune has launch control (PowerFC does not have), Nistune you can fully map the DC for the boost solenoid (PowerFC you cannot).

So tell why the PowerFC is better? Because of its useless hand controller?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881705
Share on other sites

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881708
Share on other sites

30 minutes ago, Kinkstaah said:

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

If that's the case GTt ones are dime a dozen, everyone going Halaltech or Link or Motec or ECU Master or Syvecs these days.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881713
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...