Jump to content
SAU Community

Recommended Posts

Hey All

I can't seem to find this problem anywhere. After highway driving for 20 mins or so and leaving it in 5th I hear a slight whine from diff at 80kph. I have changed the diff oil to nulon 75w90 correct spec and it made absolutely no difference. 

Any idea what the problem is? And no vibration at all.

Some say additives work some say they don't but I don't want to fork out for the redline stuff for it not yo fix anything. 

Ideas pls?

Link to comment
https://www.sau.com.au/forums/topic/478849-r32-gtst-diff-whine-after-warmed-up/
Share on other sites

On 10/4/2019 at 11:10 PM, Dil-Dog said:

Time to weld it ?

Welding won't fix it, it will be due to pinion bearing wear and the pinion/ring gear mesh is slightly off causing it whine. 

Needs rebuild to fix, and depending on how long its been driven like this the pinion/ring gear might need to be relapped. 

-Blake.

  • Like 1

My $0.02.

In other words, crown wheel and pinion is rooted. Maybe not totally rooted but if it's making noises the damage has been done and they're on the way out. Need new MATCHED set, installed and shimmed correctly for correct gear backlash. There is no magic fix for worn diffs and no additive is going to fix it, no not even that Redline crap everyone raves about.

I stuffed mine that bad in one of my GTRs in the front (where people usually run lighter oil) that the crown wheel and pinion gears were actually razor sharp to the touch, which is a lot of wear if your familiar with crown and pinion gears. It made all sorts crazy noises under load, and why your noise is appearing once the diff oil is hot and thinner in your differential. I will never run ANYTHING other than 75w - 140 in any GTR diff front or rear again after that. After 19 years of GTR ownership anyone who runs stuff like 75w - 90 in any GTR diff front or rear is asking for trouble. I know it's a gtst but same thing basically. Anyone tells you to run 75w - 90 is a dickhead and asking for a diff rebuild, unless changed very regularly and / or has very little power.

It's all about protecting the crown wheel and pinion and the heavy stuff does the job, especially when most people don't drop their diff oil that often.

Motul comp gear 75w - 140 or Castrol Syntrax 80w - 140 (used to be SAF-XA) or you may as well put water in your diff.

Both the Castrol and Motul is generally around the $30 - $45 a litre range. Most other reputable oil companies have diff oil in that range too, Castrol and Motul just seem to be the top pick and Castrol is readily available. Castrol used to be the most recommended by companies like Holinger and Albins until the Motul stuff came along.

On 10/7/2019 at 11:46 AM, LINK17 said:

I think this is the problem, I checked the diff oil and it's 75w90, thanks for the great advice. 

I love the motul stuff but can't find where to buy except stupid prices online?

I use the Motul or Nismo oil. Its expensive but you don't need much and have you priced a diff rebuild?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...