Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Am also intrigued in the Albins v Samsonas debate. Seems most time attack / circuit cars are running Albins and many drag cars run Samsonas. Anyone with any decent ideas / info on why?

 

I know Albins offer things like quick drop change of gearsets, but am wondering why the split and if there’s any data based reasons. 

On 7/13/2020 at 8:57 PM, Keegs said:

Am also intrigued in the Albins v Samsonas debate. Seems most time attack / circuit cars are running Albins and many drag cars run Samsonas. Anyone with any decent ideas / info on why?

 

I know Albins offer things like quick drop change of gearsets, but am wondering why the split and if there’s any data based reasons. 

The Albins has an internal oil pump so may help for circuit cooling but they appear to be similar. I think B2R are putting the Albins in some decent powered straight line cars at the moment

11 hours ago, SiR_RB said:

My mate will have his albins going in his 32 gtr next week

was ordered through Hypertune and is direct fit 

his making 950kw behind a PMC built billet block 2.8

 

afew other mates also running samsonas 

Nice! would LOVE to see the install pics!

  • 4 weeks later...

Just went through all of this myself .. I bought the Albins today!  The updated Albins is the ST6-LP (Low Profile) - it comes in a new custom billet casing that direct fits (no tunnel mods like previously).  It is offered with a custom HyperTune shifter.  

I priced up the Albins, Samsonas, Holinger and PPG. Albins is the most expensive, Holinger and Samsonas about the same and the PPG was the cheapest.

Dan

 

Albins.jpg

albins1.jpg

Screenshot_3.jpg

  • Like 5
On 21/08/2020 at 6:40 PM, IMACUL8 said:

Just went through all of this myself .. I bought the Albins today!  The updated Albins is the ST6-LP (Low Profile) - it comes in a new custom billet casing that direct fits (no tunnel mods like previously).  It is offered with a custom HyperTune shifter.  

I priced up the Albins, Samsonas, Holinger and PPG. Albins is the most expensive, Holinger and Samsonas about the same and the PPG was the cheapest.

Dan

 

Albins.jpg

albins1.jpg

Screenshot_3.jpg

Awesome! Thanks for sharing. I ended up going with the Albins as well. Sure was the most expensive but I do plan on pushing the motor to around 12-1300hp hence the decision.

  • Like 1
20 minutes ago, Predator1 said:

Awesome! Thanks for sharing. I ended up going with the Albins as well. Sure was the most expensive but I do plan on pushing the motor to around 12-1300hp hence the decision.

Well done mate!  Congrats.?

  • 3 weeks later...

Just remember that Albins are now focusing more of their time and energy on the defense side of their business and therefore their customer support has dropped off in recent times, this is not hearsay but firsthand experience from a workshop that I do part time work for. Just something to keep in mind.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...