Jump to content
SAU Community

Track semis question

PranK
 Share

Recommended Posts

PranK Grand Master

PranK

Posted
Posted

Hello all,

I'm planning on hitting Wakefield soon in my 330i for a bit of fun. It has new shocks and lower eibach springs and that is the extent of my changes to the car. As I've always been out using street tyres and how everybody who uses semi's have told me that they are just so much better I thought I'd do that this time around.

My daily wheels are 19's and wont be used. I have a set of MSport 17's that will become my track wheels.

First question - my rears on the 17's are 255/40/17 and I'm wondering if there'd be much of a problem to use a more common size, such as 245/45/17 ? 

Second question - I do not have much money for this, it really needs to be a budget hobby. I was looking at using KENDA tyres but most feedback for them is from people drifting. The next cheapest are the Nankang NS-2R which have great feedback and are pretty cheap still. What are people's opinions here? Is there another tyre I should consider? 

Anywhoo, I'm seriously looking forward to getting out there again.

Thanks all.

Link to comment
https://www.sau.com.au/forums/topic/481309-track-semis-question/
Share on other sites
GeeDog Experienced

GeeDog

Posted
Posted
9 minutes ago, PranK said:

my rears on the 17's are 255/40/17 and I'm wondering if there'd be much of a problem to use a more common size, such as 245/45/17

Assuming you have 8.5" rims, 245 should be ok. The 245/45 will be a slightly larger diameter, so acceleration will suffer a bit.

13 minutes ago, PranK said:

The next cheapest are the Nankang NS-2R which have great feedback and are pretty cheap still.

We tried these a few years ago, and compared to a "real" semi slick they weren't very good. I thnk the AR-1 is a better track tyre than the NS-2R, but not sure how the pricing compares. Have you tried to find used tyres - there are some bargains to be had sometimes.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

I'll chime in, AR-1 tyres are good for 1~2 hot laps, but they don't progressively fade and just go from grip to shit in half a lap..

For the beginner however I would say they're a pretty good budget semi, I personally preferred Nitto NT01 over them and of course if budget can be stretched further Hankook Z221 would be preferred.

Hit up Taleb Tyres or St George Tyres - they seem to have old stock (approx 2 year old) Z221 at a reasonable price.

  • Like 1
admS15 Grand Master

admS15

Posted
Posted

Im going to be that guy and say the opposite of dosepipe. AR1 bang for buck cant be beat. I seem to be able to have grip for 5-6 laps before needing a cool down lap. My best ever time was on lap 8. 

 

My current  set has completed 190 laps so far and still look great. My first set went close to 300 laps, started going backwards at around 250.

Unfortunately can't upload pics as the forum isn't allowing files larger than 2mb for some reason. Maybe the server has covid.

But if you can get z221 handcocks cheap, then it's a no brainer.

  • Like 2
PranK Grand Master

PranK

Posted
  • Author
Posted
1 hour ago, admS15 said:

Unfortunately can't upload pics as the forum isn't allowing files larger than 2mb for some reason. Maybe the server has covid.

That should be fixed now? Missed config from server migration.

Thanks all, thats some good info.

Firstly, I'm assuming that if possible it'd be better to get 245/40's instead of 245/45's ? 

Then, I guess I need to work out my budget per tyre and then from there see what I can get. 

245/40/17 AR1's are ~$250.
255/40/17 NS-2R's are ~$200.

I've noticed nobody mentioning the KENDA's. So message received there. :)

I forgot also about treadwear. If its an option, what is best for tyres lasting longer but still a good performer? I'm not doing time trials, just trying best bang for buck.

Duncan Grand Master

Duncan

Posted
Posted

don't worry about wear on a track tyre, nothing will last compared to a street tyre. You are heading out in summer for 20min sessions so you need a medium/hard or hard compound.

Do you have a second set of rims or are they going on your dailies?

I'd go cheapest 245/45/17 in the following order - Hankook z221, Yoko A050, Dunlop DZ03G, Kumho V70a, Bridgestone Re11s, Toyo 888R. There's a bunch of other ones but I don't know them and haven't seen them used seriously

And let me know when, I'm just up the road and can drop by with some kitty litter for the oil down.

  • Haha 3
Unzipped Composites Rising Star

Unzipped Composites

Posted
Posted

Going from a street tyre, the AR1's are going to feel pretty good anyway. So if you're concerned about money, AR1's are ok. Personally I agree with Dose - they seem to have a really tight performance window, where to get the best times out of them you really need to dial the pressures in for each corner (of the car). And then when they are gone, they are gone. Which makes it really hard to have confidence in them, because you'll go out for a couple of laps, get some heat into them, love the grip, and then go into the next corner like you're on ice. All well and good if you aren't actually trying to dive later and later into each corner and really trying to find those tenths, so they aren't a terrible option if you're really just wanting a bit of fun while going faster than you would on street tyres. If you genuinely want to drive on the limit of what your car can do - the AR1's wouldn't be my choice.

 

To put that in perspective, I would probably be happy to run AR1's for testing/tuning purposes where seat time is really the ultimate goal. If I was entering a competition, I would stay well away, and go a proper tyre like A050/Z221/AD08 pending regulations.

Kinkstaah Grand Master

Kinkstaah

Posted
Posted
2 hours ago, GTSBoy said:

Misha's Nurburgring M4 taxi runs on AR-1s. Flat out, lap after lap.

I'm sorry, Robert Kubica drove the car on these tyres, and I'll have you find that a regular track day user is significantly better than Kubica.

 

/s

PranK Grand Master

PranK

Posted
  • Author
Posted

Thanks guys, loving the info, much appreciated!

D I have a 2nd set of 17's that I'll use for track tyres. And, BMW's burn oil, they don't drop it. I'll just fill it up when I get fuel. 😂

 

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
1 hour ago, PranK said:

This is not the BMW bashing topic!!

Don't worry brah, I heart BMW too.

On the fence between stripping the R33 shit box, adding a bit of cash and getting either a M2/3/4

  • Like 1
Kinkstaah Grand Master

Kinkstaah

Posted
Posted
54 minutes ago, Dose Pipe Sutututu said:

Don't worry brah, I heart BMW too.

On the fence between stripping the R33 shit box, adding a bit of cash and getting either a M2/3/4

How much would the BMW have cost you if it did what the R33 did?
(Sorry for BMW bashing)

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
1 minute ago, Kinkstaah said:

How much would the BMW have cost you if it did what the R33 did?
(Sorry for BMW bashing)

If I binned a BMW motor, I would probably just set the car alight, call it quits in the car scene and then buy a hybrid Camry

admS15 Grand Master

admS15

Posted
Posted
1 hour ago, Dose Pipe Sutututu said:

Don't worry brah, I heart BMW too.

On the fence between stripping the R33 shit box, adding a bit of cash and getting either a M2/3/4

Have you seen what r33's are currently going for with covid tax and yes they are changing hands. If you want to get rid of it, now is the time. Bang a second hand motor in it and send it on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...