Jump to content
SAU Community

Recommended Posts

29 minutes ago, Super Drager said:

Lol mate ive had it apart and the specs match the real thing. If you don't want one then don't buy one, i'm giving first hand experience since i own one. 

I wasn’t having a go, I was asking a genuine question. Wanting to know what you were comparing it to, going from stock turbo to one of these, similar Chinese- Chinese turbo, u have driven the name brand equivalent with exactly the same set up as yours?

what’s the context of what you were comparing to say it works fine. 

it’s a turbo sucking air into a motor so yeh it works “fine” but is it making target boost at the right time? Laggier compared to what it should be? 

8 minutes ago, UWISSH! said:

I wasn’t having a go, I was asking a genuine question. Wanting to know what you were comparing it to, going from stock turbo to one of these, similar Chinese- Chinese turbo, u have driven the name brand equivalent with exactly the same set up as yours?

what’s the context of what you were comparing to say it works fine. 

it’s a turbo sucking air into a motor so yeh it works “fine” but is it making target boost at the right time? Laggier compared to what it should be? 

I cant say for my setup as im running mine in a compound setup and rear mounted. However a friends xr6t has gone from a gcg gtx35 to a pulsar and its exactly the same power and spool wise. 

On 16/11/2020 at 3:41 PM, khezz said:

Does anyone here use any of their products or know of anyone who does?

There are a few quick reviews on other forums and a few videos on YouTube. So far every comment is positive. All the reviews say they are well machined, balanced on both ends, well assembled turbos. Yet they are less then a 3rd of the price of a precision or a Garrett.

Would be great to hear some first hand experience.

Thank you

7.jpg

They are awesome! Really good quality in machining and materials and perform better than expected. I have a comparison between Garrett GTX3582R Gen1 1 and Pulsar 3566 for what it's worth.

18 hours ago, infomotive said:

They are awesome! Really good quality in machining and materials and perform better than expected. I have a comparison between Garrett GTX3582R Gen1 1 and Pulsar 3566 for what it's worth.

Can we see it? 

21 hours ago, infomotive said:

Really good quality in machining and materials

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

  • Like 2
1 hour ago, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Don't you dare use common sense in this discussion! 

Just remember turbos are an afterthought and nobody ever builds a turbo car and anticipates a turbo upgrade... 

1 hour ago, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Your assumptions are third rate. When you assume you make an ass of you and me...

Visual inspection and disassembly of components by a competent tradesperson gives valuable insight.

Axial and radial clearances check out and when monitored are not changing with harsh conditions like 2 bar boost and no BOV. Drilling and tapping housings for anyone with a little experience reveals quite quickly the quality of the material.

If you have ever tightened a compressor cover bolt on a cheap turbo you will know it can be a tentative affair, not so on these.

Threads are perpendicular to machined surfaces etc etc. Fasteners are good. V-band spigots are perfect. They weld perfect. They don't distort. They exceed expectations in quality, reliability and performance.

There a a few minor details that are being improved as with any product.

They are not for everyone. Some people will never be able to accept anything other than name brand and don't have the ability to do their own research and testing. And that's ok.

 

Hope this helps the OP

  • Like 1
  • Thanks 1

Haha I made an ass of you an me

oh well. 
 

I can also tell how good metal is by the colour of the sparks, but in the end it is a fairly wild guess isn’t it without proper metallurgy?

 

what are the minor details being improved?they seem quite relevant

9 hours ago, Ben C34 said:

Haha I made an ass of you an me

oh well. 
 

I can also tell how good metal is by the colour of the sparks, but in the end it is a fairly wild guess isn’t it without proper metallurgy?

 

what are the minor details being improved?they seem quite relevant

Material specification is the same as what Garrett use except for 713c Inconel only on the turbines, no Mar-M option at this point.

Interestingly, I have replaced a Garrett Gen 2 GTX3582 that melted a hole through the turbine housing and damaged the turbine etc with a Pulsar equivalent. I supplied on the condition of no warranty as the customer was unwilling to fix the issues leading to the failure. The Pulsar turbo has against all odds survived, so far.

Just cosmetic details.

 

On 1/11/2021 at 8:09 PM, Super Drager said:

Lol mate ive had it apart and the specs match the real thing. If you don't want one then don't buy one, i'm giving first hand experience since i own one. 

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

2 hours ago, djvoodoo said:

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

As i said, if you don't want one then don't buy one. If you think a theoretical miniscule variation in weight of the compressor or turbine wheel is worth paying triple what i paid for mine then more power to you. I'm more than happy with my poor-mans turbo.

What i find funny is that people on her wank over mamba/kinugawa but when another (much better) turbo comes along you won't even take someones positive feedback on it. 

  • Like 1
3 hours ago, infomotive said:

Material specification is the same as what Garrett use except for 713c Inconel only on the turbines, no Mar-M option at this point.

Interestingly, I have replaced a Garrett Gen 2 GTX3582 that melted a hole through the turbine housing and damaged the turbine etc with a Pulsar equivalent. I supplied on the condition of no warranty as the customer was unwilling to fix the issues leading to the failure. The Pulsar turbo has against all odds survived, so far.

Just cosmetic details.

 

Mate i wouldn't bother any further, they seem content not to listen to first hand experience so there's no reason to continue trying to explain anything. 

  • Like 1
On 1/13/2021 at 10:41 AM, djvoodoo said:

Should put the comp wheel on a scale and see how much it weighs compared to a Garrett. Would also be interested to see real world back to back tests on things such as boost threshold/ lag/ transient response etc. The cheaper turbo might match in physical dimensions, but that doesn't mean it's going to be as good as the real thing.

I can tell you what will happen..they will be the same..they would be made by kts...the biggest makers of billet wheels in the whole world..most places get there stuff made there..a lot claim as there own..Its piss easy to make a comp wheel exactly the same..its not even expensive..they are like $120 a piece(or where) if you buy one with a kts trade account

Thats all they do..kinga/mamba they are all kts to

Sorry guys..but these turbos are the shit.....china has stepped it up on a new level

Maybe the only complaint will be the bearing system is not up to scratch with the german etc stuff..but for most people..they wont do that many kms anyway...failing that..you can buy these turbos with aus built quality cartridges already...expect to pay another $1000..still cheap..a g42 for $2500...

Edited by jet_r31
  • Like 3
On 1/12/2021 at 6:11 PM, Ben C34 said:

Just curious, I am assuming this is based on the very scientific eyeball ? I can’t see how you could determine material quality accurately, and I have assumed you haven’t actually measured anything either 


 

Knock offs can work good, everyone knows that. They can also have wildly varying quality and break in unusual ways

Ask tao...looks like he is using all same housings etc now...

  • 6 months later...
  • 3 weeks later...
On 11/08/2021 at 11:08 AM, The Mafia said:

Has anyone used the Pulsar SXE range? Any results? I am keen to try one. Specifically the S369 and S372.

Thanks :)

Best bet is to check some US forums, i know a lot of mustang guys run bigger pulsar turbos and have good results. 

  • 2 years later...
On 11/17/2020 at 6:02 PM, Mick_o said:

You had to take it too literally didn't ya? 🤦‍♂️

The turbo is 100% a critical part as it determines the powerband of your engine, the drivability of the car, but its also a critical part that determines the engines reliability/longevity. 

If turbos are an afterthought does that mean if you build your motor  you can just bolt on 1300hp turbo onto the side of it? None of the other internal components need to be a little different? 

Pretty dumb huh? 🤔

people like that never get it, never will.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...