DaveB Posted October 19, 2007 Share Posted October 19, 2007 i have r32 GTR front and rear brakes on my stagea, no problems Thanks! Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3422703 Share on other sites More sharing options...
Raysboostin Posted October 26, 2007 Share Posted October 26, 2007 i found out some info today u guys might like to know. i went to QLD transport today and asked the guys in the compliance office about brake upgrades. he said that fiiting the brakes from a R34 gtt would require a mod plate, but u can fit the brakes from a 260RS (brembos) with no need 4 a mod plate as long as they r from the same year model stagea (but im thinking as long as the part numbers r the same on gtr brembos as stagea, it wont matter). so u guys that have done the gtt upgrade may want to check, as u could have voided ur insurance!! whats that gonna cost ya!! Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3436842 Share on other sites More sharing options...
Tangles Posted October 26, 2007 Share Posted October 26, 2007 good info I've found that simply using stainless steel braided brake lines front and rear has improved the braking 100fold. That and front slotted DBA rotors off the shelf, with new stnd Bendix pads. very very very very good and sufficient braking right there ^ at bugger all cost and heartache definately a "performance" upgrade in my opinion. all you have to do is provide your insurance broker a list of all your mods and its all good (I use Shannons). Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3436919 Share on other sites More sharing options...
snapper Posted October 26, 2007 Share Posted October 26, 2007 just asked my local nissan dealer regarding s2 stagea brakes jap codes as follows Front AY040-NS098 Rear AYO60-NS029 he said he was going to try and find out more about them and how to get them in will let you know how i go Hi having my pads rebonded should have them back this week will let all know how it goes and price ! Running modified navara 01 3.0 turbo diesel pads at moment till i get my pads back ! have been running these pads for 10 months without a problem and have been brutal on them at times . will inform on my other pads asap ! Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3437282 Share on other sites More sharing options...
Raysboostin Posted October 28, 2007 Share Posted October 28, 2007 good infoI've found that simply using stainless steel braided brake lines front and rear has improved the braking 100fold. That and front slotted DBA rotors off the shelf, with new stnd Bendix pads. very very very very good and sufficient braking right there ^ at bugger all cost and heartache definately a "performance" upgrade in my opinion. all you have to do is provide your insurance broker a list of all your mods and its all good (I use Shannons). where did u get the braided lines from?? did u ask 4 stagea 1s or do u have to ask 4 something else that still fits stagea (example: ask 4 skyline R33 gtst or something) Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3439003 Share on other sites More sharing options...
Tangles Posted October 28, 2007 Share Posted October 28, 2007 AlexCim went to Maltech and got them custom made - they now do them for Stagea's. He had an accident, I bought his brake parts so thats where these came from. Contact Maltech in VIC and get prices; not expensive & good value IMO. Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3439005 Share on other sites More sharing options...
mid life crisis Posted October 28, 2007 Share Posted October 28, 2007 all you need tangles is 50 metres of rope and a old boat anchor to pull a big heavy tub like yours up lol :-) Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3439070 Share on other sites More sharing options...
_Ryan_ Posted November 8, 2007 Share Posted November 8, 2007 Hey guys, How much MOTUL RBF600 Will i need for a full bleed, as i am putting Endless SSS and RDA slotted rotors on shortly. -Ryan Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3463471 Share on other sites More sharing options...
mitchy_ Posted November 8, 2007 Share Posted November 8, 2007 whatever size those little bottles are, you wont use a full one. Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3464355 Share on other sites More sharing options...
Stagea_Neo Posted November 16, 2007 Share Posted November 16, 2007 Hi All, I've been watching this topic with some interest. But don't believe I've seen a definitive answer yet for a series 2 stagea on brake rotors and pads that can bolt straight on like original equipment no machining OD down 5-6mm etc.... I would like to just walk into a bursons, repco, autobahn..etc..... buy rotors, pads go home bolt them on and be back on the road in 2hrs. Am I dreamin?? Pete Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3479032 Share on other sites More sharing options...
chuckie Posted November 16, 2007 Share Posted November 16, 2007 Hi All,I've been watching this topic with some interest. But don't believe I've seen a definitive answer yet for a series 2 stagea on brake rotors and pads that can bolt straight on like original equipment no machining OD down 5-6mm etc.... I would like to just walk into a bursons, repco, autobahn..etc..... buy rotors, pads go home bolt them on and be back on the road in 2hrs. Am I dreamin?? Pete G`day dreamer ???,i have been chasing pad`s since dec 06 no luck,unless you pay top $ for gen part`s i think it was $228 for front pad`s.so at the moment it`s rebond`s,i have tryed to find old set of pad`s no luck ???? i am chasing a importer hear in perth for pad`s.had some luck with serivce kit`s for auto`s so hope he will come up with PAD`S,i will talk to him next week good kuck Pete,chuckie. Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3479116 Share on other sites More sharing options...
Stagea_Neo Posted November 16, 2007 Share Posted November 16, 2007 I'd be interested to hear how you get on Chuckie. My searches thus far have only been web based, just information gathering on possible sources, part numbers etc.... Will hit the phones/workshops soon with queries and post any info i get. Pete G`day dreamer ???,i have been chasing pad`s since dec 06 no luck,unless you pay top $ for gen part`s i think it was $228 for front pad`s.so at the moment it`s rebond`s,i have tryed to find old set of pad`s no luck ???? i am chasing a importer hear in perth for pad`s.had some luck with serivce kit`s for auto`s so hope he will come up with PAD`S,i will talk to him next week good kuck Pete,chuckie. Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3479259 Share on other sites More sharing options...
mike40sydney Posted November 16, 2007 Share Posted November 16, 2007 I'd be interested to hear how you get on Chuckie.My searches thus far have only been web based, just information gathering on possible sources, part numbers etc.... Will hit the phones/workshops soon with queries and post any info i get. Pete hey guys you could always try the compliance shops for stock type pads .i have a full set here as spares thet i got off darrin spencer pads rotors calipers front and rears so i should be sweet for a while . Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3479796 Share on other sites More sharing options...
Tangles Posted November 16, 2007 Share Posted November 16, 2007 best to ask an importer to get you some direct from Japan, I reckon.............. do a group buy lads Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3480143 Share on other sites More sharing options...
_Ryan_ Posted November 17, 2007 Share Posted November 17, 2007 https://www.rhdjapan.com/home/products/prod...product_id=3910 give them your VIN number when you order, and they will make sure you get the right ones, 187$ per end delivered in 7 days is pretty fkn good for endless SSS, sponsors sell them for 240+ -Ryan Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3480497 Share on other sites More sharing options...
Stagea_Neo Posted November 17, 2007 Share Posted November 17, 2007 Hi There, Thanks for the feedback. Just found this link, not sure if anyone has seen/mentioned it before. Looking at the picture they look fairly similar to whats on my car, will have a better look tomorrow morning. The Z33 is real popular i seem them everywhere, same listing/same pad? Maybe check out the stock at the shops for Z33 pads as a possibility. Fingers crossed this leads to an option.. Pete http://www.fujibrake.co.jp/pads/fblpad_e.php?fblno=AFP385S Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3481236 Share on other sites More sharing options...
Stagea_Neo Posted November 17, 2007 Share Posted November 17, 2007 Hi There, Here's a link for the rear pads, Pete http://www.fujibrake.co.jp/pads/fblpad_e.php?fblno=AFP265S Hi There,Thanks for the feedback. Just found this link, not sure if anyone has seen/mentioned it before. Looking at the picture they look fairly similar to whats on my car, will have a better look tomorrow morning. The Z33 is real popular i seem them everywhere, same listing/same pad? Maybe check out the stock at the shops for Z33 pads as a possibility. Fingers crossed this leads to an option.. Pete http://www.fujibrake.co.jp/pads/fblpad_e.php?fblno=AFP385S Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3481245 Share on other sites More sharing options...
oxford1327 Posted November 19, 2007 Share Posted November 19, 2007 awesome work on the part numbers listings have been looking for something like this for ages. i reckon the mods or anyone else who knows how to, need to put this in the sticky section under the parts listings etc.? good work there NEO cheers oxford Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3484156 Share on other sites More sharing options...
Stagea_Neo Posted November 20, 2007 Share Posted November 20, 2007 Cheers Ox Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3487127 Share on other sites More sharing options...
_Ryan_ Posted November 27, 2007 Share Posted November 27, 2007 do r33 gtst rears fit under stock rims, and would this upset the balance with standard fronts? Series 1 Link to comment https://www.sau.com.au/forums/topic/82083-stagea-brakes/page/9/#findComment-3500117 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now