Search the Community

Hi guys Chasing a set of rear brembo calipers from an r34 GT-R Let me know what you have Thanks Robbie PM me or send me a txt on 0407 175 417

hi there, im sure this has been asked before so sorry for the repeat, have been trying to search and seems the search bar (or my pc) hasnt been working for a few days. anyway, my brother drives a 2003 (i think) 350GT he has recently upgraded to much bigger AP racing calipers and rotors so here i am thinking i need bigger brakes when i see them in a box in the shed and they would be about perfect for what i need. (2 pot rear 4 pot front i think) would the rotors and or calipers directly bold on? and if not what would be involved in making them fit? also would i be needing a bigger than standard master cylinder? cheers Caleb

R34 GTT Front caliper mount bolt size - 14mm x 1.25mm R34 GTT Rear caliper mount bolt size - 10mm x 1.25mm Compared too R34 GTR Front caliper mount bolt size - 14mm x 1.25mm R34 GTR Rear caliper mount bolt size - 10mm x 1.25mm Correct ? Alterations? Cant find a straight answer anywhere... Yeehah

Hey guys as the title says I am looking for a front right caliper for a 2012 GTR. I know it’s hard to find just one but just in case someone has one please let me know. I dont mind the condition (scratches, fainted color, pots, seals) as long as the structure of the caliper is solid. I am in Sydney. Thanks John

Hello, i've recently done a turbo brake conversion on an n/a, all seals replaced and caliper bores and pistons cleaned before installation. but when i took the first drive there was a sound in the rear like fluid being forced out, upon stopping there was fluid on the outer lip of the disc and fluid all around the wheels, not enough to be dangerous but eventually. so i put it down to a faulty caliper as it had a speck or two of surface rust and replaced them with better condition ones, these have the exact same problem and im so confused, im assuming its the piston leaking but im hoping its the new HEL braided lines i installed as the 34 gtt lines have a little bit of thread exposed from the caliper Any help would be really appreciated because i need to drive it and done wanna pay drug money for a shop to look at it

CTS-V calipers Hey all, Heard quite a bit about folks swapping CTS-V 6-pot calipers into their S13s for a stupidly low price but am yet to hear of anyone doing it to a Skyline. I was interested in some 4-pots for my GT so hit up a guy who does custom adaptors for the S and Z chassis (http://www.ctsvbrakeswap.com/nissan/), he claims the S13 style adaptors should fit the non-GTR model R34s at least. Anybody got any more info on this type of swap/heard about anyone who's done it? Cheers

Hi there people, im hoping someone can help me here. I have recently purchased (been ripped ?) an R32 skyline 4 door. The car is a 1998 (yes thats what the nissan motor company plate has as the build date) R32 Impul-R skyline. Now i know the vehicle is an Impul special model, this included a whole bunch of "Factory" upgrades and such. My problem is that some stupid dick before me changed the original 4 spot front calipers to single spot sliders that i didnt know came out on any particular r32 skyline. The rear are still the factory sumitomo (i think) 2 spot calipers with 280mm (i measured) vented discs. I have a set of sumitomo 4 spot calipers to go on front but cant work out what size disc i need. Ive been told i need 32mm thick disc and one on front is 22mm and i think 275mm diametre (i did say it was some dick that changed them). Going by the dust? shield dia. it seems i could go a bit bigger. The mounting holes on both calipers are same width apart but it appears the 4 spot would sit further out due to mounting arms. Any help any one could give that might lead me in the right direction would be of the most help as ive been researching and sending emails to nissan and imul and have had no help. cheers.

R32/33 324mm brake upgrade kit. Will also suit s13/14/15 using r33 gtst callipers. HFM calliper adaptors with 8.8 grade bolts (used in vgc) RDA Plain 324mm rotors (used, will most probably require a skim) QFM A1RM DB1170 pads (99.9% brand new, used for a couple of days on the street before i upgraded my brake system.) Works well as an entry level upgrade and provides some decent repeatable stopping power. $240 for the whole lot. Will take some measurements and decent pics of everything tomorrow.

GKTech caliper brackets for R33 GTST I have a pair of GKTech front brake caliper brackets to fit an R33 GTST Skyline. These brackets allow the stock Sumitomo front calipers to fit over a larger GTR rotor, providing more braking power & better heat dispersion. These are ideal if you do track days or motorsport in your R33. All bolts are included. I believe they also fit R32, S13. S14 & S15, but you need to confirm this yourself.They are used, boly heads have surface rust, but otherwise no issues. Located in Adelaide, but can post at cost.

Taking too long to stop your doped out R chassis so you can holla at some hot ass girls on the street? Then look no further. These came off my GTR and have only traveled 45,000kms (verified with Japanese department of transport) What you get: 2x Front Brembo Calipers and High quality racing pads 2x Front 330mm Factory Rotors 2x New Non ADR approved brake lines 2 x Factory Brake lines I will supply the rotors machined ready to go. Perfect big brake upgrade for your S or R chassis. If you want to stop like a mofo, this will do it. Happy to post at buyers expense. I *May* be able to organise cheap postage to Brisbane if you can pick it up from a Depot. $1150, plus whatever postage comes to. Thanks.

Hey guys, Some stuff for sale since I don't own a skyline anymore. This is the only remaining parts so don't ask if I have this or that part lying around please. 1. Full R33 GTS-T brake kit. Includes 5 stud hubs, all calipers, all brake lines, all pads (rears are good, fronts are a little low), and stock disc rotors (need machining before use). The front hubs still have knuckles attached for ease of fitment. Asking $500 ono. I paid a lot more! 2. R33 Dash with passenger airbag. Dash is in mint condition, and included is the passenger airbag module and control unit. Asking $100 ono. Again, I paid more. Located inner west Sydney 2041, but can be located near Castle Hill area on weekends. I may be able to help with delivery within reason. Contact me via PM or text (as I don't always have my phone on me) O425 O93 384 Cheers, Mitch