Jump to content
SAU Community

Recommended Posts

You are missing the fact that in victoria you are guilty untill you prove you are innocent, might sound a little sceptical but when you look at things like an epa notice for noise and emissions, they make you prove your innocence, if you dont prove it your automatically guilty (if you dont get it tested and cleared you get fined), the cops do what ever they like and its up to you to prove they are wrong.

And if you prove them wrong, you will most likely still have to pay $$ lol.

And if you prove them wrong, you will most likely still have to pay $$ lol.

$43 for a noise test........

And if you get a major the dollars and time pile up............

How else do you think the government makes any money? considering they have sold all of our utilities to private companies now. The government doesn't have any assets! So what do they do? Charge us more!

Anyway, perhaps we need to go back on topic? :D

cheers for that,

Q:

reinforce, bit of 1mm scrap with same hole drilled on tacked/ stitched welded on underneath or exhaust tube type reinforce ?

wondering if this would be a common thing cops would defect and rwc would pass in the same state....

thanks

1mm won't be enough. Some small steel reo bar type thing will be fine.

Once you get defected, then get it engineered. I see no value in spending $600 on engineers for a hole like that until you get caught... BUT... if you reinforce it, show the cops, you might be left alone and never have to worry about it. IF you do, you've already done it and it's a simple fix (engineers).

I asked Nissan what the clearance should be and they said "100mm". So I'm not sure where this adage/myth of 'height of a Coke can' comes from?

Standard Coke cans are 130mm unless they are referring to mini Coke cans.

A rule of thumb is to check every thing you read on forums, a lot of it will be right but if it is wrong it's your arse in the line, I have seen lots of wrong advice handed out as a fact, really makes me wanna kick those people in the nuts!

hey guys got defected today :( thats all good .......... just he took pictures of catchcan (aftermarket drift brand) and didnt like how i attatched a breather to the end of the hose. and my pod filter......so my question is when they take photos...what is the purpose? are they going to investigate it? decide to epa me? just curious it was a highway patrol and he knew a lot of things....

just he took pictures of catchcan (aftermarket drift brand) and didnt like how i attatched a breather to the end of the hose.

Catch cans must be recirculating, properly made catch cans, or oil/air separators (which is what they are there for) will do the job fine when plumbed back.

Edited by W0rp3D

Take photo's as evidence of the mods.

You will get an EPA in the mail most likely.

well i got a epa in the mail today emmissions and noise.. fml..

gonna go test it see if i pass with upgraded turbo(gt2876r), r32 gtr injectors, z32, dr drift remap.. everything else is stock ....not worth it?

well i got a epa in the mail today emmissions and noise.. fml..

gonna go test it see if i pass with upgraded turbo(gt2876r), r32 gtr injectors, z32, dr drift remap.. everything else is stock ....not worth it?

lol definitely won't pass.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...