Jump to content
SAU Community

Recommended Posts

  • 2 months later...

Would a ding like the one on this car prevent roadworthiness? The one on the back door most specifically, the paint would probably buff off.

cp5324997492350916733.jpg?height=700&asp

Edited by bucket_boy101
  • 1 month later...
  • 3 months later...

I've just bought an R34 GTT and I'm looking for some original rubber brake and clutch pedal covers for a roadworthy. I know in the past aftermarket bolt-ons have been denied, and I don't particularly want to pay $150ish dollars for genuine GTR ones. Any help would be much appreciated.

I spoke to the mechanic today who will be doing the roadworthy and he said bolt on type of pedal covers would need to be bolted THROUGH the pedals, not bolted on using brackets as most aftermarket kits have, or alternatively, grip tape/skateboard deck tape is acceptable, as long as the pedal has a grippy surface it will pass. So I spent $5 at a bike shop on a 90mm x 500mm strip of scooter deck tape. I'll have enough left over to re-cover both pedals 5 times over. He is also happy with coilovers as long as they are a quality brand (mine are Teins) and not a backyard job. Car is booked in for Monday, happy days!

  • 4 months later...


Got a question for everyone, i was in a quiet carpark tonight and was revving the car stationary a bit (its fairly loud) and a unmarked ford transit van pulls out of nowhere with 6 cops in it, two come out and say what the hell are you doing..


long story short they didn't check my license or anything.. just said your car dosnt sound normal I'm going to take your rego down and pass it on to a highway patrol to check over your car so expect a letter in the mail !!


Do you guys think the cop was bluffing? does a why patrol come to your house to check your car or? any help will be greatly appreciated.


there is nothing stoping a cop coming around and checking your car. strange if they had that much of a concern that they didnt get the HWY Patrol car to come there on the spot. but i suppose all you can do is wait now.

You'll most likely get an EPA notice in the mail, organised BY hwy patrol courtesy of him forwarding your details to them. Which means going to a noise test. Unless he got lazy later on or forgot about it, you'll get a notice.

I was in a quiet carpark tonight and was revving the car stationary a bit (its fairly loud) and a unmarked ford transit van pulls out of nowhere with 6 cops in it, two come out and say what the hell are you doing..

I would have said the same thing... :P

  • 3 weeks later...

Ok, so I tried to get a roadworthy today, and it failed because when you put the headlights onto high beam, the low beam lights switch off.

According to Vic RW standards, the low beams need to stay on when you're on high beam.

AFAIK, this is normal for the car, but the workshop guy said absolutely no room for negotiation on this.

WTF? Anyone had any experience with this?

uwot?

Skylines (and lots of cars) do this from factory... as you pull the stalk towards you, highbeams come on and then (less than a mm later) lowbeams go off...

I assume to limit power draw or overheating of the headlight casings?

They got complianced just fine like this...

I'd ask him to point out where in the Vicroads regulations it specifies headlights and high beams must come on at the same time. Nothing in VI26 stating that at all.

https://www.google.com/url?q=https://www.vicroads.vic.gov.au/~/media/files/documents/safety-and-road-rules/vsi26_1212_web.ashx%3Fla%3Den&sa=U&ei=a8xlVOGCCIO0uASmn4H4Dw&ved=0CAYQFjAA&client=internal-uds-cse&usg=AFQjCNGnCFP--oDZ6hARnPy2LHeNtUDf2Q

Nothing in ADR 46/00 about headlight/high beam coming on at the same time either if you wanted more proof that dude is talking out of his arse :P

http://www.comlaw.gov.au/Details/F2006L02294

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...