Jump to content
SAU Community

Recommended Posts

Not overtly cynical - Import, male driver - if you are in the wrong places at the wrong times expect to get a defect.

They can't notice turbos, so dont stress.

It's simple - you can make near on 400rwkw and it will only take 45mins to be "legal" (by swapping stock parts on), if you go about your modifications intelligently.

Gday gents,

Have just moved to Vic, as my R32 is a track car this question relates to my Landcruiser.

How strict are roadworthy inspections on seeping oil? I have 2 leaks, one from the pinion seal and one from a powersteering hose. I have the parts to replace them however no shed or tools to do it as im staying in a hotel at the moment.

Was hoping to get the roadworthy done on the car before i go back to work so once iam at work i dont need to stuff around getting roadworthies in the week that i will have left on the rego!

Advice please!

Both fairly straightforward jobs. Really depends how fussy workshop is and how bad the leaks are. If you pressure wash beforehand and it's a minor weep it may not be an issue. ANother option is of course to choose a workshop who can undertake the work for you as well as doing the rwc.

  • Like 2
  • 1 year later...

Doubling up on a question I asked in another thread.

Can anyone recommend me a place in Melbourne (West subs preferably) to get my RWC done? A place that will actually do a RWC for a R34 GTR.

Thanks

  • 3 months later...

Hi

Looking for some advice on buying a modified car that has no roadworthy.

The car I'm looking at has brake upgrades,3 exhaust turbo back with high flow cat, suspension upgrades, larger turbo upgrade,air intake upgraded,turbo timer/boost control, upgraded injectors, spare intercooler yet to be installed so running standard cooling.Radiator top tank was empty when I looked so I didn't test drive it. The engine has been replaced with a reconditioned engine. Dash says 260,000 km's but reco engine installed at 170,000kms "apparently".

The car is registered but the guy isn't selling with a roadworthy which is my concern. He also doesn't have the import paper's as he's I think the third owner.

Are any of these mods illegal to register if I'm copped with the roadworthy?

He's asking $7,800 which I think it isn't worth without roady. Not sure what's a fair price for it? It's 1998 R33.....I've added some pictures if that helps.

post-74120-0-37169100-1465680477_thumb.jpg

post-74120-0-16395800-1465680490_thumb.jpg

post-74120-0-20340300-1465680504_thumb.jpg

post-74120-0-69543900-1465680516_thumb.jpg

You will have trouble with the following: (Depending on your RWC guy/gal)

1. Injectors. Anything with different injectors is a fail. You may be able to get away with it IF they aren't visible...

2. Suspension upgrades (no coil overs, must be OEM)

3. Aftermarket exhaust. Needs to be factory, or proven to be under the sound limit and emissions. You pick which one. Either is expensive... You may be easier to get something CAT back and just prove the sound limit. Anything to do with aftermarket Catalytic converters, usually means trouble and requires an engineers sign off.. $$$

4. Larger Turbo (if they know what it looks like compared to factory). So no high mount/twin scroll polished nastiness!

5. Air intake upgrade may require investigation, but could be OK. If you are running the standard intercooler, then you should be OK.

6. Brake Upgrades... Forget it. These will have to be converted back to OEM unless you can prove the car stops the same and you haven't affected ABS etc. Any RWC will put a cross against this.

7. Based on a quick look at your photos, the catch can cannot vent to atmosphere. You must have it plumbed back to where the factory point is. Nothing wrong with running a catch can, it just can't vent to atmosphere...

8. Wheels: Check to see whether the rolling diameter isn't different by more than (damn I can't remember) X%. and the width needs to be checked.

9. Boost controllers, aftermarket ECU's. Forget it. These will have to be replaced with OEM stuff.

Hope this helps.

My car passed a RWC earlier this year with coil overs. As long as the car is above 120mm off the ground with no one in it you should be fine.

Exhaust should be OK as long as it's not too loud but places that are not familiar with modified cars will probably not pass this as they need to take photo's of everything. Vicroads have been known to question inspectors who pass cars with non-factory exhausts.

Air intake (pod filter) is only allowed if you are running the stock intercooler.

If I was you I'd speak to a place who is familiar with modified cars and ask them of their opinion. Sometimes it's more hassle than its worth (which is why the seller isn't selling it with a RWC).

Good luck.

You will have trouble with the following: (Depending on your RWC guy/gal)

1. Injectors. Anything with different injectors is a fail. You may be able to get away with it IF they aren't visible...

2. Suspension upgrades (no coil overs, must be OEM)

3. Aftermarket exhaust. Needs to be factory, or proven to be under the sound limit and emissions. You pick which one. Either is expensive... You may be easier to get something CAT back and just prove the sound limit. Anything to do with aftermarket Catalytic converters, usually means trouble and requires an engineers sign off.. $$$

4. Larger Turbo (if they know what it looks like compared to factory). So no high mount/twin scroll polished nastiness!

5. Air intake upgrade may require investigation, but could be OK. If you are running the standard intercooler, then you should be OK.

6. Brake Upgrades... Forget it. These will have to be converted back to OEM unless you can prove the car stops the same and you haven't affected ABS etc. Any RWC will put a cross against this.

7. Based on a quick look at your photos, the catch can cannot vent to atmosphere. You must have it plumbed back to where the factory point is. Nothing wrong with running a catch can, it just can't vent to atmosphere...

8. Wheels: Check to see whether the rolling diameter isn't different by more than (damn I can't remember) X%. and the width needs to be checked.

9. Boost controllers, aftermarket ECU's. Forget it. These will have to be replaced with OEM stuff.

Hope this helps.

Thanks Heaps, sounds more like trouble than good. I figured there was a reason why the car was offered with no RWC. They didn't know anything about the engine's history other than listing what he'd reckoned was done. No receipts nothing.

My other question was do you need any import or original RAWs compliance paperwork if you buy without a roadworthy? I thought you'd need a copy of the compliance paperwork if your buying without a roadworthy.

I wasn't after the engine, I wanted to use the front section to restore my own car's damage.

Really didn't know what to offer. So offered

That's not the engine from a 1998 R33 Turbo...

I noted that too.The Engine and VIN numbers showed that, not typical numbers.

It was a reconditioned engine "apparently" that had 170,000kms clocked up = a tired engine.

I took a wide berth and walked away from it.

Looked like the car had been passed around mates numerous times.

I've found a better specimen last weekend which I'm looking into.

  • Like 1
  • 3 months later...

Hi I have a question in regards to Rim sizes that will pass VIC  roadworthy.

I've  got a 1997 SII R33 GTS-T coupe. Stock rims are 16".

How big/wide can I go but keep it from being fined? I was told spacers aren't allowed but that's the only info I've been able to obtain so far. Was hoping to get some bronze deep dish rims 18 x 8 front  & 18 x 9.5 on rear ....or wider but not sure how far i can go before mods kick in?

There's a heap of Japanese GTR fitment rims around but finding it hard to find Japanese rims with  a GTST fitment.

Anyone had any grief after fitting Japanese Work, Volk, Enkei rims?

Edited by mercyseat

Coming from a highway patrol cop!! The main guys at epa at McLeod have either retired or moved on and the epa never bothered to replace them. So that part remains closed and they can't send you up there for a full epa.

However the noise epa checks at exhaust shops are the only place they can send you.

I reckon that the epa of the past is long gone, imports are rare and people don't bother with crazy mods anymore. It's all about stealth and performance euro cars that currently outnumber the imports heavily.

Plus most hwy patrol cops these days know f**k all about cars cause they're not trained and have no interest in cars at all. It's all about handing out fines and that's it. Few of the older blokes are still very knowledgeable but even they cbf anymore. Not long ago my brother got pulled over in a BMW M4 and the cop complimented how nice his Benz was loll

  • Like 1
On ‎19‎/‎09‎/‎2016 at 4:31 PM, Buraz said:

Coming from a highway patrol cop!! The main guys at epa at McLeod have either retired or moved on and the epa never bothered to replace them. So that part remains closed and they can't send you up there for a full epa.

However the noise epa checks at exhaust shops are the only place they can send you.

I reckon that the epa of the past is long gone, imports are rare and people don't bother with crazy mods anymore. It's all about stealth and performance euro cars that currently outnumber the imports heavily.

Plus most hwy patrol cops these days know f**k all about cars cause they're not trained and have no interest in cars at all. It's all about handing out fines and that's it. Few of the older blokes are still very knowledgeable but even they cbf anymore. Not long ago my brother got pulled over in a BMW M4 and the cop complimented how nice his Benz was loll

If that's the case how would one clear a full epa from the past if they supposedly don't do it anymore? I'm kind of hoping it'll just eventually vanish off the system one day :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...