Jump to content
SAU Community

Recommended Posts

  • Replies 204
  • Created
  • Last Reply

Top Posters In This Topic

Ok this is baffling. How do I pull the left rear inside off to get to the TV tuner?? M35. Plenty of info for the older stags but none for the M35. If I ever successfully do it Imight put together a pdf of the M35 install.

I took four screws off the top panel, easy slip off. But the carpetted panel beneath it won't come off. I can see one black plastic plug, hard to remove without breaking it but the whole thing sems pretty solidly attached and I'm scared to pull too hard for fear of breaking something.

Ok this is baffling. How do I pull the left rear inside off to get to the TV tuner?? M35. Plenty of info for the older stags but none for the M35. If I ever successfully do it Imight put together a pdf of the M35 install.

I took four screws off the top panel, easy slip off. But the carpetted panel beneath it won't come off. I can see one black plastic plug, hard to remove without breaking it but the whole thing sems pretty solidly attached and I'm scared to pull too hard for fear of breaking something.

It can be difficult to get the panel off with out removing the floor. It will come out though with a bit of effort. I think you will have to remove the cover for the tools but this one is reasonable easy.

On the carpeted side panel, there is a black plug that needs to be removed by popping the top out (or maybe screw it), it is a bit difficult and you will need remove the panel next to the passenger seat over the rear wheel arch.

Cheers

Andy

  • 1 month later...

Hey Guys,

Just about to get started on this today, just wondering if i have everything that i need..

M35 stagea with navigation unit/tv.. check

Looms from Chris/audio express.... check

@ work with every little tool i could possibly need...

now do i need rca cables? and can someone give me a brief rundown on how long it will take for a m35 and what needs to be done...

Hey Guys,

Just about to get started on this today, just wondering if i have everything that i need..

M35 stagea with navigation unit/tv.. check

Looms from Chris/audio express.... check

@ work with every little tool i could possibly need...

now do i need rca cables? and can someone give me a brief rundown on how long it will take for a m35 and what needs to be done...

Hi Andrew

If you are only doing the TV tuner and not adding any other items at the same time you have all that you need. You didn't mention that you have Chooks TV tuner but I take that as a given.

I would say about 2 hours to do it all.

If you can remove the whole panel in the boot it will make it easier. Make sure you have some thing to secure the 2 TV ariel cables into the new mount. I used shrink cable covers but tape will do it if you are good at wrapping it.

You need to find your power and I can not remember which wire I picked up for that. Craig may remember.

Chooks instructions are very good and very soon you will be enjoying your TV in your heated leather recliner. (perfect for the Vovo driver)

Cheers

Andy

Ahh nice, cheers for that

i've been driving around for the past few days with all the rear trims removed..

i take it i need to remove the stereo/navi unit to plug these things in from chris? is there a rca or something that goes back to the tuner in the back? as i dont have any here.

i also dont have factory bose.. someone pulled it out

OK so after putting all the dash back in place :) hehehe

i am in the rear, got it all apart relay ready to go almost at the stage ready to power up.. but just wondering which wire is the power for the aerials??? just searched the post but couldnt find this info..

i'm taking power from the standard tuner/unit

6 pin plug 5 wires inside. yellow for constant and green for accessories hopefully thats ok?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...