Jump to content
SAU Community

Recommended Posts

If only your mother knew of the word! :P

Most of us here are more concerned with kilowasps and efficiency than checking out our gelled hair in the reflection of a pipe...but each to theirs I guess!

good one. im gonna use that next time!

Scottys work fabrication is some of the best I've seen, I'de rather a strong weld that will hold up under extreme circumstances, than something thats probably been made of the same quality as tin foil.

He's probably the only fabricator I'de trust working on my car, or anyone else's car locally

Quick update. I have boosted my SS2 to 15psi and it goes awesome considering its untuned. Knock didn't go past 18 (had a previous tune that accommodated the boost. And clutches kicks are a dream with the twin plate. Getting tuned on 18-20psi on the 15th. If I get time I'll post up the results of that. In all honesty it is a bit laggy for me but I'm very picky. Just got to learn how to accommodate for it when I drive.

Quick update. I have boosted my SS2 to 15psi and it goes awesome considering its untuned. Knock didn't go past 18 (had a previous tune that accommodated the boost. And clutches kicks are a dream with the twin plate. Getting tuned on 18-20psi on the 15th. If I get time I'll post up the results of that. In all honesty it is a bit laggy for me but I'm very picky. Just got to learn how to accommodate for it when I drive.

Surely tune will help with this, seems premature to evaluate.

Lol. How would you know what my idea of laggy is? I have doubled the rear wheel and rear housing size, so I think it isn't premature to evaluate this. Even a good tune won't make it not laggy "in my eyes". But each to their own I guess. Some people don't think a g3 is laggy and some people (me) thinks a ss2 is. Its a fantastic Turbo and so dynamic but as I said I have to get used to it.

Looking at the ss2 dyno and having driven similar turbod cars I would say it is laggy by most peoples definition, laggy for it is though? no

Edited by Rolls

Lol. How would you know what my idea of laggy is? I have doubled the rear wheel and rear housing size, so I think it isn't premature to evaluate this. Even a good tune won't make it not laggy "in my eyes". But each to their own I guess. Some people don't think a g3 is laggy and some people (me) thinks a ss2 is. Its a fantastic Turbo and so dynamic but as I said I have to get used to it.

Lol indeed.

Lol. How would you know what my idea of laggy is? I have doubled the rear wheel and rear housing size, so I think it isn't premature to evaluate this. Even a good tune won't make it not laggy "in my eyes". But each to their own I guess. Some people don't think a g3 is laggy and some people (me) thinks a ss2 is. Its a fantastic Turbo and so dynamic but as I said I have to get used to it.

Well it's true laggy is subjective, but he's right, the tune will help with spooling and power delivery. Will also improve the off boost fuel/timing so that the lag itself isn't that bad.

Yeh but it doesn't say Greddy and you can't see yourself in the polished reflection.

I make practical intakes that work, not fap toys. lol.

Have to agree there!! Have seen a lot of Scott's work and seen his piping hold 550+ rwkw, practical is just the start of it! It might not have a badge, but probably flows better and has better value for money than "badges" out there. Some of his custom designs are awesome, even trying to get him to do some improvements on some fabrication that has been done to my car.

Thanks Shadz, drop in sometime I can definitely help you out. (If you're keen to drive an hour each way for some work to be done mate.) :)

On topic, I have an M35 turbo coming down to you for one of those new 'responsive' highflows on the previous page Stao. I will call when it's out. Thanks for sending him my way buddy, I will look after him.

I forgot to mention in the last run before the head gasket cracked. That SS2 has a customized housing, it is slightly more responsive then the one before that model. SCR48 has that housing. Adam come for a test drive in the newer housing have a feel of differences once I get the car back on the road.

Latest configuration

98boost.jpg

The one earlier:

boost.jpg

Some updates:

The manifold finally came back from Brae auto fab:

manifold1.jpg.jpg

and it will be running on a 50mm external gate:

manifold2.jpg.jpg

This is still a bolton manifold that holds a turbocharger in stock position. How ever I'm going to wait for the later and cheaper manifold prototype that said to be complete on Monday.

The head gasket also shown up. how ever it isn't 1.1mm as what the seller claim to be. 0.051 of an inch calculates to be 1.3mm.

gasket.jpg.jpg

any one had experiences with 1.3mm head gaskets? or I'm just going to install another stock gasket back in. hopefully it will be back on the road towards the end of next week.

I'm keen to see what the SS2 would do at its full potential, on that setup, then follow it by an updated version of the SS3 now has a different wheel curvature, which I'm hopping to hit some where close to the 400rwkws mark with similar response as the SS2.

atr43ss3.jpg.jpg

By the way SS1PU is now available in a SR20det bolton form. A trail with customers stock S13 SR20det have reported a final figure of 270rwkws @ 17psi using 260 duration cams on pump 98 responsively. I will pickup and post the dyno read out coming week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...