Jump to content
SAU Community

Recommended Posts

The booster does create alot of resistance when there is no vacume. I was surprised when i pulled it appart, how tight all the moving parts were.

I don't see much point in doing it to a road car.

I never had much luck doing the double flares myself ben, how did u go with them? I ended up just taking them down to tas brakes to get done.

Its coming along well though, looking forward to seeing it on the road!

they came up well, i found the key was to tighten the buggery out of the pipe holder, otherwise the pipe slips when you do the first part of the flare.

The booster does create alot of resistance when there is no vacume. I was surprised when i pulled it appart, how tight all the moving parts were.

I don't see much point in doing it to a road car.

what about a track car with numberplates though?? worth doing then??

got a parcel from roy yesterday.

gallery_5985_3354_2095132.jpg

abs unit has been tested and (now) doesn't leak, as it uses bubble flares instead on double flares.

have to brace the buggery out of the brake pedal now, as it's pretty flexy.

I think damo should give up his day job as an auto leccy and become a seamstress. I could see him on the sewing machine punching out overpriced designer dash's.

Good job guys!

id prefer to quit and go into full time race car building. but ill have a go at that to

I haven't really detected any difference between the GTST and GTR stock ABS. neither are super fast but thankfully they are quite lazy (ie quite a high threshold) so on the circuit you will almost never have it cut in at all. on uneven or broken surfaces though (which I'm sure you get plenty of in tarmac rally) they are shithouse. can't cope well at all with low grip tarmac and then you find the sampling rate/pulse speed etc become a problem. for tarmac rally I can see for sure a better unit is a good idea. I'm not sure how much is in the valve body or how much is in the programming and processor power of the ECU. I suspect most of the gain comes in smarter/faster ECUs.

Can I ask a stupid question at this stage?

I have upgraded my brakes to the Brembo size (F40, Brembo rears & larger master cylinder).

The ABS on the R32 was originally pretty ordinary. With the larger brakes it is even worse. Does the povvo pack ABS unit have enough capacity to release the large pistons on the Brembo callipers or do you need a different unit?

I suppose the question is: Is an R32 V-spec ABS unit different to the poverty pack GTR version?

A second dumb question relates to the Vspec ATTESSA unit rate. Can you sling in a later unit from a 33 ie up from 4Hz to 100Hz & does this affect the ABS???

Sorry for the thread hijack.

The pump unit in the 32 series is the same.

My GTR has Porsche 6 pot's on it, and i can still flat spot tyres with it.

I'd put a fair but of thought into a Tarmak Rally GTR, and if wanted to build the best 32, you'd fill it with R33 bits. The ATTESSA PRO ecu is day and night compared to the R32, heaps faster, ABS is heaps more responsive (but not too aggresive) , also feeds torque to the front wheels under brakes (found that from datalogging it) for stability, and a R33 transfer case to handle the higher baseline awd. IMO the biggest problem with the 32 is the old tech ECU's, it was bloody advanced in 1989, but tech came a long way by 1995, i think the pumps are fine, just the ECU that drives them.

A R33 ATTESSA ECU would be well worth doing, as you have better ABS, and AWD. I'm not sure how hard it is to disable to A-LSD in the ATTESSA PRO, cause that's the one you want. Only thing you'd want to consder is if the R32 tranfercase can handle running a little all the time.

On another note, where did you get the rotors for your F40's? Are they 2 peice, and 332mm?

Edited by sav man

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...