Jump to content
SAU Community

Recommended Posts

On 5/4/2022 at 11:03 AM, Komdotkom said:

Is there also rumblings about partial refunds for competitors this year? I can only imagine the money which has gone down the drain for no event this year.

I'm going to try, if enough of us get together we'll have a better chance.  I think only 14% of the event was run

On 5/4/2022 at 11:03 AM, Komdotkom said:

Is there also rumblings about partial refunds for competitors this year? I can only imagine the money which has gone down the drain for no event this year.

Targa give refunds 😂

Cracking Up Lol GIF by HULU

 

On 5/4/2022 at 10:21 AM, sav man said:

No idea at this stage.  I would like for them to go back to AASA.  The 200k limit is a joke, as all the incidents have been well under 200k.  This year was the first time I was checking my speedo on a stage, as I don't fully trust that the rev limiter won't overrun.

 

The problem is more when a car comes off the road that the GPS can't get a signal out cause the car is upsidedown or the antenna has been ripped off.  It then relys on car to car comunication, which can also fail depending on distance from the road and antenna damage.  I think there needs to be a failsafe that if a unit stops talking back to HQ that a stop and look for car instruction is sent to following cars at the last known location.  There is probably better ways, but the discussion needs to be had.

Yeah hopefully once everything has calmed down and reviewed they will come up with better procedures for rallysafe & incidents.
Having to always check speed is dangerous but at least stuff with efi/after market ecu can set limits.
 

On 04/05/2022 at 11:42 AM, sav man said:

I'm going to try, if enough of us get together we'll have a better chance.  I think only 14% of the event was run

While I think you've got SFA chance of actually getting money off them, I would hope that they would offer a significant discount on future entries. Despite the event not running in a competitive sense, I don't think the costs to the organisation will be much lower so from their point of view I don't think it will be viable to hand over any cash.

 

  • 3 weeks later...
  • 2 months later...

After the shit show that was Targa I lost all motivation for a while.  I'll put the big block in soon and replace the Haltech with a Motec.  I don't recon I'll make it to the mainland till next year, but challenge bathurst does look cool.

  • Like 2
  • 1 month later...
  • 2 years later...

I've still got the og shell in the shed and the new shell is almost ready to race again.  I've got a Motec M150 in the car and just sorting a driveline vibration and putting in 10mm fuel lines then it will be running again.

  • Like 1
  • 8 months later...

It's the same ABS unit from the old shell.  It was all just lifted and shifted.  I am looking at the BMW MK60 ABS unit as a budget upgrade, as I'm not keen on handing over 15k for a Bosch unit.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...