Jump to content
SAU Community

Recommended Posts

4 hours ago, ActionDan said:

The pin/hinge and adjusting knob interest me, how have you got that setup and where'd you source the bits? 

 

 

It's just a cheap one off Ebay- 

https://www.ebay.com.au/itm/331881988969

I chose this one as it comes with the thread in the base of the mounting post. 

I bought a threaded rod and nuts if I need a longer adjuster. 

  • 1 year later...

It’s just dumb to have such similar designs that are only half compatible…

 

This is my latest tool “investment“.  I’ll use them for everything I’m assembling that I take photos of to put on Insta (ie. nothing….)  On Project Binki they call them the “show spanners!”

I’ve wanted them for ages so finally convinced myself they’re worth it when they’re actually totally not but meh. 🤷🏼‍♂️

C57E2752-7099-4991-A638-08806028BA12.thumb.png.f2d2fbdb6934e3adb98fbf8eff6d68d1.png

D6431D86-636F-4891-9580-8839F5278742.thumb.png.77fda2ecf996da1794c48c01528ad1d1.png

 

  • Like 1
On 28/12/2021 at 1:27 PM, Ben C34 said:

When you realise how Phillips head is designed to cam out when the torque is high it is f**king ridiculous it is still in use.

Must be cheaper to make...I would have thought that they would all go to allen key head or even torx...wish that they did, its easy to chew out a phillips/posidrive/jis head with a drill or impact driver.  Both doing up and undoing, lost count of the times I've had to use a dremel and cut a slot into a screw or bolt then 'shock' it out with a manual impact driver to get it out.

FYI for info on the phillips/JIS/Posidriv/Torx/etc options  check out https://en.wikipedia.org/wiki/List_of_screw_drives

Looks like the 'Vessel' brand does JIS, anyone have other suggestions on brand (or shop)?

On 28/12/2021 at 9:08 PM, MrStabby said:

FYI for info on the phillips/JIS/Posidriv/Torx/etc options  check out https://en.wikipedia.org/wiki/List_of_screw_drives

Looks like the 'Vessel' brand does JIS, anyone have other suggestions on brand (or shop)?

https://www.sealey.co.uk/product/5637750680/4pc-jis-screwdriver-set

 

  • Like 1

But, where do you ever come across JIS fasteners? Not in a Nissan thankfully.

And those long spanners are nice to use, but they just aren't feasible in most tight locations. 

On 30/12/21 at 9:09 AM, Duncan said:

But, where do you ever come across JIS fasteners? Not in a Nissan thankfully.

And those long spanners are nice to use, but they just aren't feasible in most tight locations. 

They’re like most specialty spanners ( S, C, stubby, ratcheting, high offset, etc) they’re shit for 95% of normal spanner jobs and absolutely essential for the 5% of situations where nothing else works. THAT is why you buy them, not for the presumption that 1 spanner fits all.  I have a stupid amount of different spanner sets now of which I will probably only use about 10% of but I’m sure you’ve been in a situation where nothing fits and it sucks balls.  I’ve wasted hundreds of dollars to avoid that incredibly rare situation but I think I just like collecting spanners! 😂 I should take a pic of all my different sets as I think I might even scare myself once I laid them all out….

  • Like 2
  • Haha 1

Have not seen many electrical tools mentioned so here are two I like. I'll see what else I can come up with.

1. Connecter depinning tools. I often see people stabbing away with a flat screwdriver only to crack and destroy their old connectors.

2. Cable tie gun. This will tighten and cut cable ties in one shot. Very practical and quick when you have 100's to do. 

 

IMG_20220102_184746.jpg

  • Like 2
  • 2 months later...
On 12/28/2021 at 5:52 PM, tridentt150v said:

Must be cheaper to make...I would have thought that they would all go to allen key head or even torx...wish that they did, its easy to chew out a phillips/posidrive/jis head with a drill or impact driver.  Both doing up and undoing, lost count of the times I've had to use a dremel and cut a slot into a screw or bolt then 'shock' it out with a manual impact driver to get it out.

Wait until you realise there's now a fastener/driver made called Torx Plus, and a Torx driver fits Torx plus heads. But under hogh torque will strip the driver or head...

  • 3 weeks later...
On 28/03/2022 at 9:34 PM, MBS206 said:

Wait until you realise there's now a fastener/driver made called Torx Plus, and a Torx driver fits Torx plus heads. But under hogh torque will strip the driver or head...

Yep, they basically have a double thickness star point.

 

I swear they purely make different fasteners so they can sell more tools.

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 😏
    • Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
×
×
  • Create New...