Jump to content
SAU Community

Recommended Posts

Finally got my other project out of the way and starting putting it back together today.

Reunited at long last

CIMG6465.jpg

New brake booster and master cylinder, have a rebuild kit for the clutch master cyl that I will get on to once I get some circlip pliers.

CIMG6463.jpg

New engine loom going in

CIMG6467.jpg

PWR radiator & in-tank oil cooler test fitting. All looking pretty good. Top pins are about 5mm out, and the factory brackets need to be flipped but all looks to sit well. I did have to bend a small lip on the car at the bottom in front of the radiator so that it didn't foul but only a few mm. Aiming to have the fuel tank and most of the wiring back in tomorrow.

CIMG6473.jpg

CIMG6474.jpg

CIMG6475.jpg

CIMG6472.jpg

CIMG6476.jpg

Steel steering blush replacement for the rubber one has arrived going in tonight.

Also need to get a replacement dust cover for the input to the rack. Literally just touched it when cleaning the subframe and it fell apart. Apparently there is a toyota rubber one that is the same size and fits well.sristeerspacer.jpg

How the fk do you get the time to do this? Please let me know if you have managed to clone yourself!

Ha I wish. Yeah just slowly chip away at it. Good to have a space where it can just sit and you can put time in where you can.

  • 3 weeks later...

Hi Paul

I am most impressed with the level of detail you have gone to. I am just embarking on a R32 build myself using the good fellows at Racepace so I am feeling rather inspired now after reading all the posts on this thread. Good luck with finishing it mate. I will start my own build thread I think. Ev.

Solid steering bush in, also grabbed the dust boot of my spare 34 rack - a little different but its rubber and fits up pretty well. Will do the trick seeing it wont be driven on the road.

CIMG6582.jpg

Hi Paul

I am most impressed with the level of detail you have gone to. I am just embarking on a R32 build myself using the good fellows at Racepace so I am feeling rather inspired now after reading all the posts on this thread. Good luck with finishing it mate. I will start my own build thread I think. Ev.

Thanks Evan. Is your car already at Racepace? Was there on Thursday and there was a white 32 that looks like the one in your sig - a nice example! Get on to the build thread for sure.

Yes very tough! Should be even meaner once all the junk is removed from inside. Cage should look good too. Got to decide how that will look as well. I might make a hybrid of yours or Duncan's perhaps..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...