Jump to content
SAU Community

Recommended Posts

Received this today out of the UK very cheap.

post-29-1291032511_thumb.jpg

I need to find a cheaper than a $1000 Carbon Fibre bonnet with no ricey vents,,,maybe a cheap S2 factory or a fibreglass bonnet. It will be painted so if anybody has one thats needs some work I'm your man.

Cheers

Neil.

Neil, can you send me the details of where to got the bonnet catches please I want to get a set. If you find a cheap bonnet let me know cause I have been looking for one for a while also.

Got them from uk ebay mate,,,heres the link,,,he is not the only shop,,,there were a few,,,but I've used him before,,,I've bought stuff for the Radical off him.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWNX:IT

Yea bonnets are a bloody pain,,,I only just missed out on a slightly damaged Carbon Fibre one from Just Jap,,,Duncan sent me this joint,,,very ricey place,,,but it might be worth a look for you. I'll keep my ear out to the ground for you,,,you need a S1 don't you?.

http://www.carmate.com.au/

Cheers

Neil.

Sweet thanks yer my car is a series one, the bonnets are very cheap I will let you know if I get one. I just want something light with minimal vents and shit.

Ryan,,,their shop is like 5-10 minutes away from where I live,,,so if you need me to go and have a look for you thats cool. Just ask mate.

Cheers

Neil.

Received this today out of the UK very cheap.

post-29-1291032511_thumb.jpg

I need to find a cheaper than a $1000 Carbon Fibre bonnet with no ricey vents,,,maybe a cheap S2 factory or a fibreglass bonnet. It will be painted so if anybody has one thats needs some work I'm your man.

Cheers

Neil.

Have you had a look at www.musecret.com.au

I believe they may have what you are after and most of them are under 1000

The mail man's been getting a work out lately and so has ebay. I paid $271 landed saving $108 bucks. Roll cage foam here I come.

post-29-1291362668_thumb.jpg

Pity seats are so bloody expensive to ship,,,looks like they will be a local buy.

Cheers

Neil.

hey Neil, your steering wheel is not round. how do you expect to do sick drifting?

any progress this weekend?

Correct Duncan my new wheel is not round,,,did you what to drift Cheryl???.

No actual work on the car this weekend,,,Nice to have a rest,,,lots of researching work done though.

I can tell anybody that wants to know that buying roll cage foam out of the States at a good price isn't going to happen. Unless you want it sea freight(12 to 16 weeks). This was looking great,,,till we had a talk about shipping.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170568669191&viewitem=&sspagename=STRK%3AMEWAX%3AIT

I've decided on an ECU for the moment,,,we are going power fc

Cheers

Neil.

Picked this up tonight,,,I spent literally hours on the net looking for a good one,,,found one on e-bay that I liked only to be out-bid in the last 15 seconds,,,sucked in to whoever beat me,,,you paid to much money.

Hge disappointment,,,so I logged onto SAU and what was sitting in the "New Posts" another bloody PFC. Quick call and sold,,,nice bloke to boot with some really cool Staffie dogs and pups. He made 230 kilo's so it will have a good starting point.

This will do for a while as I really do want motec.

post-29-0-54858600-1291626323_thumb.jpg

Cheers

Neil.

Innovative LM-1

inn-3723_w.jpg

With an LMA-3 Data Logging Kit...

LMA3_web3.jpg

PM me if you would like to make an offer. It's just sitting at my Dad's house. I'd say replace the O2 sensor with a new one, as O2 was always in the dump pipe, but unit was rarely connected...

Lemme know and I'll try bring it on Sunday.

Innovative LM-1

inn-3723_w.jpg

With an LMA-3 Data Logging Kit...

LMA3_web3.jpg

PM me if you would like to make an offer. It's just sitting at my Dad's house. I'd say replace the O2 sensor with a new one, as O2 was always in the dump pipe, but unit was rarely connected...

Lemme know and I'll try bring it on Sunday.

Nice,,,but at this stage,,,a simple cheap system will do for the time being if I even bother. While it would be great,,,in my big picture using Motec will do everything I need after the engines are done. The entry level M84 at rrp of $2420 is great value I think.

Cheers

Neil.

Wow I want that ECU!

More pics are need though Neil!

Here you go mate,,,the price I posted was out of Auto Action last week.

http://www.motec.com.au/m84/m84overview/

Cheers

Neil.

Spent Saturday,,,researching again. I'm chasing a 2nd gearbox so I can run an after-market gear set. Bloody hell every bastard wants them,,,for SR powered cars and VL's. $1500 for a second hand un-known one is serious rubbish money,,,I'll keep looking but,,,I've just about decided that I have 2 options,,,ask in our wanted section for a crunchy one or look at importing a car.

Sunday,,,started at 8.30 and had to stop at 2.00pm,,,I'm getting way to old to put in a full day in this heat. I started with cleaning up again,,,it's so easy to make a mess. I decided I needed to start covering the holes left after the sound-deadening fun we had. I found 3 of the 4 big steel plugs and after removing 5mm of crap off them,,,I welded them in. I couldn't find the 4th one so we ventured down to Clark Rubber to buy some rubber grommets to block the firewall holes,,,floor holes and the hycass hole in the boot,,,or should I say I bent over and got raped. $40 buck for 13 grommets just isn't fair,,,What would they cost them,,,20 cents each. Anyway as Mel said on the way home,,,"You needed them so cop it on the chin my love".

post-29-0-51840900-1292130665_thumb.jpg

post-29-0-92365900-1292130683_thumb.jpg

Started looking at removing the carbon canister and all it's pipes and hoses,,,but I need 2 peeps to do to properly.

Cheers

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...