Jump to content
SAU Community

Recommended Posts

I was trying very hard to keep my stuff-up a secret,,,like very in house,,, but seems thats dreaming.

Basically I stuffed up,,,went in to quickly and she woudn't turn, i was trying to catch a v6 supercharged commodore in my class and f**ked up.

Yes I have pics and vids,,,just no time for that malarcky,,, i have spend the last 2 weeks stripping her and putting her back together,,,12.30 nights every night, I'm rooted to say the least.

Cheryl Lives on,,,thanks to all the help from the following great people,,,in no particular order,,,i love you all

Pete and Jenna,,,thanks for all the parts,,,what would I have ever done without your help guys. THANK YOU

Duncan and Matty for all the helping put her back together,,,thanks both of you for all your time and effort,,,very much appreciated.

Mathew at Race Brakes Sydney for helping me out with new Discs and Pads,,thanks as always mate,.

So tomorrow a wheel alignment and get the front bar painted and she's good to go.

Cheers

Neil.

Seems some one was videoing Cheryl as well. At least she sounds great.

https://www.youtube.com/watch?v=m77HeRx7_t4

If the wheel alignment comes back bad and I can't take her to the SAU nats,,,I have a backup plan. I've been offered a drive of a very modified clubman.

Cheers

Neil.

I've been into (or up actually) that bank as well mate. Probably 10 yrs or more ago.

Mt Cotton is a difficult place to come to and try to go real hard first time you've ever been there. It caught out alot of very experienced hillclimbers that weekend, so you're in good company.

Good to hear it's pretty much ready to go again :)

Yep on the money there Harry,,very technical track to get used to,,,I'm usually pretty good at working out where I can go quicker and I had lots of help from an old mate from up there. Seems I picked the wrong spot to go in deeper. Bit shocked at the carnage that happened,,,lots of open wheelers crashed which is very unusual.

Ben there were a number of times going down the 1st loop that I and many others had the old shvinkter tightening up.

Time to start packing for Adelaide,,,wheel alignment is great.

Heres my in car,,,everyone loves a stack.

https://www.youtube.com/watch?v=FCmfgWy5sQA&feature=youtu.be

Cheers

Neil.

  • 3 months later...
  • 4 weeks later...

actually it drives beautifully and very predictably, and has done more motorsport in the last 3 years than any other SAU car I can think of. I'd have it in a second over most cars around the forums.

  • 1 month later...

Cheryl had a date with Yavus of Unigroup Engineering fame on Saturday and I believe she has fallen head over heals in love with him. After playing with her bits,,,I approved of cause and she now has 242kw's coming out of her rear end. I did ask if we could maybe lower her enthusiasm down a bit, but no was the answer.She does have a great rear end by the way.

That's using stock injectors,power fc, 040 pump, plasmaman inlet manifold,Z32 afm, FMIC and a Turbosmart boost controller.

We both left there very happy and I've entered her in next weekends VW Supersprint at Wakefield Park.

My only hope is I don't have to keep emptying her colostomy bag after every session.

Cheers

Neil

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...