Jump to content
SAU Community

Recommended Posts

soooo i couldn't help myself, and felt i needed to add my own touch to the car.

Midori and the previous owner had already made something very special, and mechanically/performance wise, there really wasn't much else to do! hahaha (well, short of getting a RIPS RB30 or something crazy like that) - I did change ECU's and get the Flex-Fuel going thanks to Trent @ Chequered Tuning, but we only changed the ECU as we couldn't talk to the one in there unfortunately. So, running at 400rwkw on E85, and having more handling performance than i can currently even being to explore due to lack of skills, i moved to the exterior...

And really, could it be anything else? :D

midori_1.jpg

midori_2.jpg

midori_3.jpg

midori_4.jpg

midori_5.jpg

midori_6.jpg

- Nismo R-Tune bonnet

- Nismo Z-Tune front bumper

- Nismo Z-Tune front guards

- Craft Sqaure TCA-F Carbon mirrors

- Nismo LMGT4 18 x 10.5 +15 w/Advan Neova AD08 tyres

(yes, genuine Nismo items)

The parts have been on for a while, but whilst Matt was selling his car, i thought i'd keep it quiet so as not to reduce the uniqueness of his beautiful 34 whilst selling - aaaaand then it took a while to get around to taking pictures :)

Paint is off the gun (by DT Panels), nothing else has been touched after painting (as per my request), wet sand and polishing action to come, at the moment it's just a washed car a few days prior to the pics (don't even think there is really any wax left either). Hasn't been detailed in a while.

Anyways, hope you get as much enjoyment looking at the pics as i do :)

cheers,

daniel

Link to comment
https://www.sau.com.au/forums/topic/370313-midori-r34-gtr-v-spec-ii-nur-v20/
Share on other sites

hahhaha, she does get a bit of attention

paint is WV2 - i might be biased, but i'm thinking i'd almost would choose WV2 over KV0 (Ztune) - i think the slightly darker shade is a bit more fitting the aggressive look, especially with black rims.

thanks for the comments everyone :)

lol @ Hamish, i thought Matt's car was still in Melbourne, still competition getting around :thumbsup:

Yeah Jamie, all those other body parts have been moved on, had to go genuine Nismo really... wouldn't have seemed right otherwise :D

Yeah Jamie, all those other body parts have been moved on, had to go genuine Nismo really... wouldn't have seemed right otherwise :D

It's the only way Dan!

I would have done the same, if owning a R34 GTR.

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...