Jump to content
SAU Community

Recommended Posts

Arguing with the naive is always difficult anyone who thinks real estate is about 'selling houses' has not a clue about the industry.

Plane to catch peace out.

Still love ya Dezz :wub:

Edited by alr33x

The jokes on Al... wait till he tries to land at Tullamarine and finds out Labor and their union buddies have knocked it down without notice to award construction contacts to their mates...

The jokes on Al... wait till he tries to land at Tullamarine and finds out Labor and their union buddies have knocked it down without notice to award construction contacts to their mates...

ah crap not again

Will def give a go

Smokin Barry's food van is awesome and much the same food

I told em I wanted something with a lot of meat and no vegetables and they said yes sir, you're our kind of guy

  • Like 1

I'm talking about people who are happy to work for a fraction of your wage because theyre from poor countries. So they come here and take the job, only to realise Australia isn't a third world shit hole and then suddenly feel they're entitled to the same money we're on....

You sell houses to people looking to buy houses. I don't think there's too much skill involved.

Flood the industry with overseas workers and we'll see how much your worth

maxresdefault.jpg

But in all seriousness, in this case, I doubt Germany is a poorer country than Australia.

I think Aldi is more concerned about the standardisation and quality control of their international buildings rather than saving $$

Geez you lads cut up rough feel bad if ya cut the power though them poor melbourne and! But I'm in San Fran ya'll so meh

Front end of the lexus way better in real life than pics ham the rear end is really nice! The one i saw had phat wheels so that helped with the overall stance

Alex body corp for that place is $1800 p/a, there's no lifts in the complex at all either - does that sound about right?

Also unrelated, I loled: NSFW

https://www.facebook.com/video.php?v=10152845749299019

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...