Jump to content
SAU Community

Recommended Posts

I have 4 cans.

I'd budget 1 x 20L Jerrycan of fuel each way to Winton or PI.

Which leaves me with only 80L of usable fuel for on the track. May need to invest in a few more Jerrys...

Still a bit concerned about fuel sitting for so long once I switch to 85... when I was filling with P100, I'd just use the remaining fuel to fill the daily over the next 2 weeks.

Yeah Winton is quite a bit more distance for me

PI is only about 120kms. So 2/3rds a tank for travels than the rest of racing

I wont be doing winton till I get some sort of flex fuel happening from Trent

I've driven to PI from the west on E85 with only 3 jerry's n raced all day. Fill up in Cranbourne, race all day and then stop at Cranbourne again on the way home.

That's good to know :thumbsup:

I find I use much more at winton as you get so much more track time.

plus sandown as you have the throttler open so long each lap.

PI you only get 3-4 sessions normally so not as bad,

calder you get bored after 2 sessions and go home ;)

I have 4 cans.

I'd budget 1 x 20L Jerrycan of fuel each way to Winton or PI.

Which leaves me with only 80L of usable fuel for on the track. May need to invest in a few more Jerrys...

Still a bit concerned about fuel sitting for so long once I switch to 85... when I was filling with P100, I'd just use the remaining fuel to fill the daily over the next 2 weeks.

chuck evo on e85 too. simple.

I carry my laptop with me and when I run out of E85 with no E servos in range, just switch to a rich 98 tune when there's about 5-10 litres left. Runs on this mix fine, can even give it a boot.

Flex is for poor planning.

I carry my laptop with me and when I run out of E85 with no E servos in range, just switch to a rich 98 tune when there's about 5-10 litres left. Runs on this mix fine, can even give it a boot.

Flex is for poor planning.

this!

that PI will not be in the MS championship as a bunch of us will be unable to attend.

but I know the guys are working on dates as we speak, with some big improvements over last year.

Any ideas on when & where the first one will be?

PI ride days are like $285 this year, quit your bitching

We need to hire MICA Paramedics, Recovery Crew etc...

You guys need to pay for a cleanup truck as well to remove face chunks from the track.

http://mypolice.qld.gov.au/rockhampton/2015/01/08/police-warn-motorists-not-block-speed-cameras-man-charged-rockhampton/

Well which is it? "High Visibility Policing is an effective deterrent for speedsters" or "Camera cars are now able to disguise themselves and hide (for their own safety)"

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
×
×
  • Create New...