Jump to content
SAU Community

Recommended Posts

What was the state of your injector O rings after this?

How well does your petrol tank seal? When you go to a petrol station to fill up does it go PSSHHH?

How long have you been E85 and how often was it driven (eg, was fuel sitting in the tank for a month at a time between drives?)

What was the state of your injector O rings after this?

How well does your petrol tank seal? When you go to a petrol station to fill up does it go PSSHHH?

How long have you been E85 and how often was it driven (eg, was fuel sitting in the tank for a month at a time between drives?)

Orings were fine.

Can't remember if i head the pshhhh or not... I'm not sure if i even hear it on the new Evo..

Been on e85 a year and half. Didn't drive it that often, only weekends. And even sometimes could go weeks without a drive

Switched to it about 3 times I reckon

I have taken the precaution of pickling the fuel system in 98 when I've gone long periods of not driving, but it is a daily driver so that's rare.

I think having old tanks of E85 is no good...if it hasn't been driven for ages I would empty it and refill.

Long enough for the e85 to turn?

Plenty of reports on the evo x forums of the issue coming up after a few weeks.

Mine was just a minor issue of it sliglty blocked one injector after a year. But even then I could have lost whole my engine if I kept on driving it without noticing something was happening. My first sign was one of my spark plugs melting and subsequent ones fouling pretty quick

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...