Jump to content
SAU Community

Recommended Posts

I'm entirely OK if my car got stolen or written off, which means it is the most secure car in the universe.

So much so, some people broke into my Camry (why, I don't know), and flattened the battery (again, really not sure how.. it starts) and left my wallet on the passenger seat where I had accidentally left it because... I'm lucky?

The universe felt sorry for you

nah. not worthy of superior RB26 unreliability.

Apparently evo's are just as unreliable when it comes to oil surge. Won't be making it there myself. :/

Plus side, there is a Haltech Elite on it's way, just so I can log the oil pressure of course. Looks like I will need to head down the Accusump path.

Ironically they were empty on the shelf - they kept the real stuff beneath one of the register counters

Saw two on the shelf and got Leesh to grab them while I nabbed my click and collect

Check the malt whisky section instead of the usual JW spot...if they've done their job properly

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...