Jump to content
SAU Community

Recommended Posts

DIY BMW repairs and maintenance is cheap and easy.

Australia rips us off because it's considered luxury car

Just buy spare parts from America and you are set.

My dad took his BMW to service centre was quoted thousands of dollars to fix, we bought all the parts delivered from America for a couple hundred and did it our self.

Some parts even cheaper than skyline parts.

Brown - Auxiliary Air Control

Purple - Fast Idle Control Device

So as long as the brown is connected, it should be fine

thanks again, enough info to find the exact information in the SR20 forum.

so brown is IACV, pretty important.

the other (I'm almost certain) is an on/off switch from ECU to boost idle when AC is on or high power steering pressure (full lock). explains why I kept stalling at DECA on the skid pan. it's all makes sense now

shopping for GTX's now... tempted for external gate but fair bit of effort involved...

I remember first time I met Aaron at Phillip Island and he said "chuck a GTX in there" "nah..."

shopping for GTX's now... tempted for external gate but fair bit of effort involved...

I remember first time I met Aaron at Phillip Island and he said "chuck a GTX in there" "nah..."

You know you need to...

shopping for GTX's now... tempted for external gate but fair bit of effort involved...

I remember first time I met Aaron at Phillip Island and he said "chuck a GTX in there" "nah..."

Took you a while to listen lol

And yes, external gate. Sooooo mut fun just get a good fabricator to hide it like Scott did for mine

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...