Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Just abit of my finding for anyone interested during the cold this winter, car basically spent two months in the garage with being started once a week up to operating temp and when I went to drop the oil today before the next track day this is what I found.

Oil had completly absored the e85 wasnt even oily anymore ended up like water. This is motul 4100 power, it was fine for 3 months in summer but winter guess its not up to the task for being stationary.

post-50426-0-58438900-1341470337_thumb.jpg

Oh shit...my car's been sitting around for months and hasn't been started weekly...now I have water as engine oil...great..........

Running E-flex + Motul 8100...

Edited by ironpaw

Oh shit...my car's been sitting around for months and hasn't been started weekly...now I have water as engine oil...great..........

Running E-flex + Motul 8100...

I actually think that mine ended up how it was due to starting it every week and since I have an oil cooler the oil did not get up to operating temp to burn off the moisture it kept getting worse. I rekon if it sits there not being started it will probably absorb less moisture, well this is what Im trying this time.

Oh shit...my car's been sitting around for months and hasn't been started weekly...now I have water as engine oil...great..........

Running E-flex + Motul 8100...

You are thinking into it too much, just get in , warm the car up and take it for a hard drive through the hills for as long as possible. The majority of the water/ethanol will evaporate especially as you don't have an oil cooler.

As it has been sitting so long you could just drop the oil, not a hard job buddy. Go the Synx6000 this time, let me know what it's like.

You are thinking into it too much, just get in , warm the car up and take it for a hard drive through the hills for as long as possible. The majority of the water/ethanol will evaporate especially as you don't have an oil cooler.

As it has been sitting so long you could just drop the oil, not a hard job buddy. Go the Synx6000 this time, let me know what it's like.

Might do that tomorrow night...fancy a visit from me? LOL

I've still got 6L of Motul 300v to use...maybe I should flog that off and use some Synx6k instead?

Oh shit...my car's been sitting around for months and hasn't been started weekly...now I have water as engine oil...great..........

Running E-flex + Motul 8100...

I'm not sure if you're reading his comment correctly. I'm pretty sure he said it got started and run to op temp weekly.

You are thinking into it too much, just get in , warm the car up and take it for a hard drive through the hills for as long as possible. The majority of the water/ethanol will evaporate especially as you don't have an oil cooler.

As it has been sitting so long you could just drop the oil, not a hard job buddy. Go the Synx6000 this time, let me know what it's like.

agreed, i have water literally spewing out of my breathers

Might do that tomorrow night...fancy a visit from me? LOL

I've still got 6L of Motul 300v to use...maybe I should flog that off and use some Synx6k instead?

Motul told me the 8100 was ok with E85, but 300v would only work if you did frequent changes.

See if you can flog it off on someone and switch to the Syn X?

I've been using Castrol Edge 10w60 with Ethanol for over a year now, oil comes out fine every time it's dumped with no issues. My motor probably gets leant on a lot harder than most :)

How long between changes? that is probably more the issue if people are leaving it 6-8 months etc.

  • 2 months later...

Yep, you won't have a problem. The water/ethanol evaporates fairly quickly once it's up to operating temp.

Summer won't be bad but short drives in winter may cause issues with catch cans filling quickly, and oil going milky, depending on your oil temps.

Something that could possibly be thought about is running higher temperature coolant thermostats like the R34 GTts use . From memory they are 82 instead of 76 and that could have an effect on oil temp and warm up times .

I certainly would not be using lower temp ones eg Nismos in a street car let alone an E70-E85 fueled one .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...