Jump to content
SAU Community

Recommended Posts

Congrats mate!

Amazing results

Get a vid for us to see how it comes on

Vids coming tomorrow... The full power runs etc were held up as the fuel pressure was dropping so they are doing a few things then running it up tomorrow.... I'm pretty pumped, the few people that have heard it said it sounds awesome!!!

Fuel pump out of flow? It would have to be close to the limit?

Yeah it wouldn't have much left in it.... But they said there is a restriction too, they are going to mod a few things and see if it improves.... Then just tune it so it's safe....

It must be an awesome feeling to finally have it going after 2 years of slowly getting everything done!

360rwkw is a shite tonne of power for a stock bottom end rb25det!

What size is your exhaust 3.5 or 4"? I couldn't see it in the build thread...

It must be an awesome feeling to finally have it going after 2 years of slowly getting everything done!

360rwkw is a shite tonne of power for a stock bottom end rb25det!

What size is your exhaust 3.5 or 4"? I couldn't see it in the build thread...

Thanks Lithium.... Real happy!! :yes:

Mitcho, the exhaust was a surprise, I figured it would hold the power back a fair bit so I unplumbed the gate etc, but it's only a 3" from memory.... The whole time I was worried but it didn't matter, apparently it may be the cause of the boost falling off and a bit of lag BUT it's a 90db exhaust so I can't complain!! :)

360rwkw thats a f**kload of power man, congrats..! I cannot see your sig from my iphone, is the engine completely stock or just the bottom end?

Completely stock with just Tomei Poncams.... It's all just bolt ons, awesome ecu and tuner and E85 working its magic... Stock headgasket, bottom end etc.... See how long it holds up....

Just read your sig, I've got 20bux on the clutch going first ;)

So have you taken it for a good drive yet? After this long it would feel like a new car, a very quick new car lol

I'm actually surprised it held up on the runs... Shouldn't jinx it as its got more work in the morning.... Tunes not complete, so no I havent driven it...

It basically is a new car, suspension, diff and power setup is all different.... And an extra 110rwkw for good measure!! :D

that's one clean looking engine bay, I like the kinda stock-ish look

It was my goal to make a high mount as stock looking as possible... It was only possible with the help from Alex @ Plazmaman and Craved Coatings, oh and Bronx for the airbox... It's everything I wanted... What the best thing is, I retained the quiet 3 inch exhaust which is legal DB so in 5 mins I can plumb back the gate and be legal.... ;)

Are you expecting any more top end from the final runs or is it just tidying everything up?

The boost was dropping off, so with the turbo and exhaust at their limit I'll be more than happy if it reaches that number again safely... The clutch would also be struggling I reckon...

Basically the runs will be to make sure the fuel pressure is safe as it was a concern I think... So glad it's with JEM tho, I know it's in good hands :D

The 3037 should be maxed at that power I think!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...