Jump to content
SAU Community

Recommended Posts

Yep, me too. Only motul fluid i use is their RBF600 Brake fluid. Have had no issues with that whatsoever.

Their oils on the other hand, cost me a couple of lifters in my 25, and also caused issues in my S14. Changed oils (And replaced lifters) and all was fine.

My tuner used to stock motul, and had quite a few problems, and now he himself stocks and uses nulon. He also Carries ULX oils.

Was Motul Turbolight 4100 10w40 in my sr, and motel 300v chrono 10w40 in my 33/rb25.

Switched to penrite in the s14 and put in new lifters and changed to nulon in the 33 and all was good.

I thought there may have been an underlying issue with the lifters in the 33, but the problem started from that oil change. Tuner said he had had the same issues with a couple of 33's he tunes/looks after.

In my case it was turbolight but I don't think it's fair to say that was what spun the bearing. It was a 200,000+ km motor running 300rwkw and was a track car of some sort in JP.

However the as soon as I changed from shockproof to motul for the gearbox it became a bag of dicks overnight and lost 5th. All gears started to crunch a little and generally felt less tight.

The diff always worked but a few runs on the skidpan was enough to kill the diff fluid. It would make a lit of weird ticking noises after a few runs and would never return until a fluid change

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

Never had issues with shockproof, but have not used it in freshly rebuilt boxes. When I put my OS gears in I won't be using it.

It's known shockproof destroys boxes, get a perfectly healthy box, add on shock proof and then watch the box deteriorate.

It's only good for boxes woth worn down synchros, if it's a healthy box steer clear of it.

Isn't it funny how views over 10 years change.

Ugggh I run Motul Htech 100 in my 33... and I've got lifter tick by the sounds of it.I used to run Penrite racing 10 10ths (10w/40) then JustJap recommended the Motul..

Looks like I'll be changing oils sooner rather than later.

Ugggh I run Motul Htech 100 in my 33... and I've got lifter tick by the sounds of it.I used to run Penrite racing 10 10ths (10w/40) then JustJap recommended the Motul..

Looks like I'll be changing oils sooner rather than later.

The precise symptoms I was talking about. My 33, and a couple of other customers had the same issues after using motul. Not sure why.

Penrite Racing 10, 10w40, just changed mine at roughly 7000km while car is off the road and has been going well in the 33 gtr, no problems experienced. Other people use HPR 10w50 with the added zinc and rate it well also for an engine that has done a fair amount of km's.

Refreshed a gearbox from a 33 gtr recently also. Cost of new bearings, synchros is fairly cheap from Japan, just take a few weeks to get all the parts. Longer if have to order more parts during the refresh. If you pay someone to do it and provide all the parts it's not that much in labour. Compared to having a crunching gearbox that is crap to drive I know what I'd take.

Once refreshed of course the gearbox feels brand new basically, worth the money. If you are not hard on boxes, the refresh will likely last for a long time.

Never used Redline oils in the gearbox and probably never will.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
    • More so GReddy oil relocation kits, sandwich plates, etc. all use 10AN fittings. And same, I've only used 10AN and my car sees track work (circuit, doing laps, not 10 sec squirt business).
    • street use or race track, what hose size and why? what factors change with the hose size options ?   see most comon is an10. when you see most oem external coolers are closer to an12? does high volume oil pump like nitto need an12 or 10 be just fine
    • The rod I was moving left and right you can see looking from the passenger side floor up into the center console.  IMG_8095.mov
×
×
  • Create New...