Jump to content
SAU Community

Recommended Posts

I need to use my car in traffic a whole heap, and the engine spends most of it's working life under 3000rpm.

I'm craving more torque between idle and 2500rpm or so- Does anyone know if there's a smaller sized 'turb that will direct fit in place of the current one??

It's a non-neo RB25 if it matters.

Link to comment
https://www.sau.com.au/forums/topic/408058-downsizing-rb25-turbo/
Share on other sites

3ltr Shaun, just slap your head on a stock-rebuilt bottom end. Get away with it for a couple grand tops IMO.

I know someone else who did a 3ltr into a Stagea, owner loves it. Made a ridiculously huge difference as it's used for towing as well :thumbsup:

Cutting the back off the car would probably be a bit loud'n'breezy, and reduces security somewhat.

While the big-block idea sounds great, it's sorta more re-engineering and expense than I could be bothered with.

I suspected an RB20 turbo might fit; Sounds a very doable option...

RB30 did it for me - but rather than downsizing the turbo get an electronic boost controller and it will come on to boost a little (just a little) earlier.

But seriously if you stick an RB30 block in your set up and change nothing else who is going to know?

I know of one person that has a GCG BB Hi Flow based on an RB20s turbocharger , at least I think the turbine housing is from an RB20 . This is on an early auto Stagea .

For torque at low revs cubic inches are hard to beat , it can have torque from lowish revs with a smallish turbocharger and thats fine provided you don't expect much beyond say 5-5500 revs .

I think its a good idea to lose the ceramic std turbo anyway and doing so makes them breath better exhaust wise and makes the engine work as a more efficient air pump .

Aftermarket wise as I said possibly an RB20 GCG Hi Flow or a HKS GT2530 would be the go .

The thing is that most go looking for more mid range and higher end performance and use larger turbos to achieve it . If you want same maximums as std and a bit more low down punch overall the turbo needs a little more exhaust flow than the RB25s Hitachis turbine has but in a turbo that boosts a little earlier .

A .

install an electric turbo that sits 3 psi on ideal. lol

Here's a Electric turbocharger that powers the car to 3psi even the engine is at 0 rpm with car key out ignition. lol

boost.jpg

Pretty big difference in torque down low

power.jpg

No its not for sale. Just a hobby I'm building.

Any way, if it is a stock turbo and you find it laggy then it might not have all of its turbine wheel, but assume its fully functional and so's the car then you might consider trade your R33 with some thing high comp NA.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...