Jump to content
SAU Community

Recommended Posts

So I did a PB on the short track of 56.4912.

Had a great night except for Practice where I wore a windscreen of someone else's petrol and blocking moves.

Run 3 I could not believe the guy was blocking me in a car that was more than 10 seconds slower and then the front guys miss counted laps and were on a cool down lap on lap 3.

Run 2 was fun but was a bit messy playing with a very quick Escort who was behind me.

any way vids:

Practice

Run 1

Run 2

Run 3

Edited by racegtst
  • Like 1

Shaun,

What sort of terminal speeds are you getting down pit straight?

Richard

Not really sure as I have no speedo in the car at all these days. It used to be around 170 km/h but the car is now quicker so guess maybe 175 to 180.

  • 3 months later...

Been a bit slack in updating this thread.

Preparation for the log book is moving along with the aim to be on the Street Car grid for the July 28 race meet.

Car went back to Racing Dynamics this week for a extra side intrusion bars. While it was there my mate painted a few of the panels so now the car is all the same color.

I have removed all stickers for the log book photos so will be calling Gav in the next few weeks to organise nice new stickers for the car.

now to the pics:

Cage

12_zps013f310d.jpg

13_zps2a659144.jpg

Put the car back together today, so I started with a collection of painted panels, so here goes. It was a nice leisurely afternoons work. Enjoyable!

Panels:

1_zpsda9b9637.jpg

Car

2_zps43c1dff5.jpg

3_zpsa63b2c0f.jpg

Boot and spoiler. From white to Silver.

4_zps6bc42a66.jpg

Bonnet. From Black to Silver.

5_zpsa03b3eec.jpg

6_zps738ddf7a.jpg

Left front guard. From Blue to Silver.

7_zpsa64214c8.jpg

8_zps9def6194.jpg

Front Bar back on

9_zpscff79000.jpg

10_zpsf19b2991.jpg

11_zps08d6360e.jpg

  • Like 1
  • 4 weeks later...

Thanks guys.

Update:

Good News - Passed log book and annual audit inspection and I received the log book in the mail yesterday morning.

Bad News - gearbox oil changes resulted in 3 synchro clips

Good News - new second hand gearbox going in, in a few weeks

Extra Good News - the stickers for the new look are expected to be applied later this week or early next week including racing numbers etc. I will update thread with pics

expected first race at Barbagallo is the 28th July 2013 meeting. Getting excited now.

Just run the box till it dies... never mind the synchro clips unless you can't get it into gear???

Mine has been crunching 4th since i bought the car..oil changed twice and bits and pieces found on both occasions...

redline smurf blood in and g/box still goin.. hahaha

Got a good box for a good price, I did not want to start my first race and b sidelined for a stripped gear off the start line.

I am unsure why the LF scrutineer wanted lock wire of your car for the sprint especially if it is still got rego, if unrego then you are supposed to have the engine, box and diff nuts lock wired.

For tjhe audit it needed everything as per the log book. I also lock wired the radiator cap and oil filler cap.

below is a copy of the WASCC check list, this is not everything as he also looked at things that were class relevant. It is hard work preparing a car for log book and annual audit.

Critical Items

Seats(s) and Mountings

Fire Extinguisher fitted ?

Wheels and Tyres

Chassis Condition

Steering System

Aerodynamic Aids

Suspension

Safety Cage / Padd:

Scatter Shield

Braking System

Fuel Tank and Fillers

Window Nets

Safety Harness /Date

Driver’s Apparel

Tail Shaft Strap

Non-Critical Items

Engine and Transmission

Reverse Gear

Bulkheads

Power Unit Mounts

Throttle Return

Camera Mounts

Lubrication and Cooling Systems

Wipers and Demister

Rear Vision Mirrors

Battery / Blue Triangle

Body condition (not affecting Critical Items)

Starter Motor

Isolation Switch / Lightning Bolt Triangle

Windscreen Laminated

Oil Catch Tank

Interior Cockpit Fittings

Head lights and Contact on glass / Stop Lights

Security of drain plugs

Doors

Tow Points

Other

Competition Numbers

Exhaust System

Sponsorship Decals

Body Appearance

Timing Transmitter/Transponder

Sealed eng: gearbox: diff:

Fair enuff...

sounds like a lot of work to get them approved...

I doubt you would have done a g/box.. the boxs in 33's are pretty much bullet proof from what i have been told... they will flog out synchro's but the gearsets very rarely fail unless you are putting mammoth HP through them..

Getting all that stuff sorted would have been a pain in the arse... i am cringing over the whole lockwire thing still...

8 and 10 laps with no syncros will be hard work. I decided to replace this box and when I get spare time I will rebuilt the current box. I also think that for the extra work and the odd missed gear that a few thenths may be saved per lap with a box that is nicer to use.

The audit stuff was hard work but well worth ti once the log book turned up. I am now hanging out for the 28th July for my first proper race.

doubt you would have done a g/box.. the boxs in 33's are pretty much bullet proof from what i have been told... they will flog out synchro's but the gearsets very rarely fail unless you are putting mammoth HP through them..

Yeah they are good but do break with big power. I broke the counter shaft on mine.

Like you said, gear engagement is the bad part of RB25 boxes. One day I'll get myselft a dog box :)

  • 2 weeks later...

Not much has happened recently. A 2nd hand gearbox went in this week and feels so much better. decat pipw and a straight through exhaust with a small hot dog replaces the muffler and now it sounds a bit tougher.

It will be getting a dyno run this coming Thursday to check everything and then bang 28th July is my first race meet.

It has been stickered up again and looking good.

Edited by racegtst
  • 2 weeks later...

So last Sunday was my debut at a race meet with the car.

WOW, did I have so fun. HELL YEAH.

I qualified 9th (17 entries). The first race was awesome but scary at he same time. The start was scary but I had fun chasing a Fiat turbo.

I started 6th I the 2nd race as it was a reverse grid and it bucketed down with rain right before the event and there was some showers during. So I took the pussy approach and just let everyone past me and then just got on with it.

The third race I started 9th and finished the day out in 8th position and beat a PB by the slightest of margins of 0.05 sec quicker.

In summary I need 2 things:

1) an extra 150 hp

2) the next race meeting, oh man am I hooked hard

Anyway below is the in car videos of each race.

Qualifying

Race 1

Race 2 - Reverse Grid

Race 3

  • Like 1
  • 2 weeks later...

haha great work :) the first race is pretty confronting, but it leads to a serious addiction :)

That reverse grid was pretty busy...and you were maybe too nice ;)

It is addictive and the next race is forever away, 2nd October and the next sprint is not until 22 September. Faaarken shit schedule this year.

I was way too nice in the wet on the reverse grid race. 2 reasons, 1st was I did not want to stuff up anyone point scores since I am a mid year new entrant and 2nd it has been 8 or more years since I have driven on the circuit in wet weather. Being the new boy on the block my aim was to finish. I will be less generous over time as I learn my place. :)

Ordered new brakes front brakes today, pics will be up soon.

  • Like 1

What brand brakes did you order?

What turbo set up do you plan to go with in the future to gain the extra 150hp you say your lacking? What size rear does the HKS 2836 have? Pro s 56t? What power are you currently got 260ish kw? A water/meth kit could gain you a extra 25-30kw atw's.

Josh.

What brand brakes did you order?

What turbo set up do you plan to go with in the future to gain the extra 150hp you say your lacking? What size rear does the HKS 2836 have? Pro s 56t? What power are you currently got 260ish kw? A water/meth kit could gain you a extra 25-30kw atw's.

Josh.

Machine gun question time :laugh:

Got a front set of 4 pot Alcon's brand new for an awesome price.

When we get around to building a new engine after this one pops, the plans currently are to fully forge a 25 (something different instead of a 26 or 25/30) with a GTX35R, I think my tuner prefers adaptronic computer (currently nistune)

I am not sure on the rear housing size of the 2835 - it is PRO kit. Currently running 350rwhp (260RWKW).

I run the car in 2 different types of events, both are CAMS regulated and I am not sure if the WMI is allowed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...