Jump to content
SAU Community

Recommended Posts

I spoke to the Russian today and he said that even thou it is a costly exercise he is working on a cheaper solution. He said I needed advanced soldering skills for the current option and its exspensive to buy equipment to do it.

I must say the English head unit is working great

GPS maps work great, good voice nav, all menus are English, bluetooth is good, pretty much full functionality except for the weather and traffic info and TV but I've been told I can fit a DTV tuner. USB cable in the glove connects to iPods etc to be displayed on the screen, very quick, no lag

Stickers for buttons are a bit tacky but from a distance looks almost stock

Would highly recommend if you have money to blow

What about the newer model?

Is it the same process?

Aren't 2010+ models easier?

From my conversation with him, it looks like he is charging the same amount but I think there is much less work. Something about him needing the nav deck n changing something in there. I'm not too sure.

I must say the English head unit is working great

GPS maps work great, good voice nav, all menus are English, bluetooth is good, pretty much full functionality except for the weather and traffic info and TV but I've been told I can fit a DTV tuner. USB cable in the glove connects to iPods etc to be displayed on the screen, very quick, no lag

Stickers for buttons are a bit tacky but from a distance looks almost stock

Would highly recommend if you have money to blow

Good to hear! I was thinking about getting a V36 after I wrote off my R33, but the non-English headunit has put me off a little. Sounds like it's less of a mind f**k now :)

I must say the English head unit is working great

GPS maps work great, good voice nav, all menus are English, bluetooth is good, pretty much full functionality except for the weather and traffic info and TV but I've been told I can fit a DTV tuner. USB cable in the glove connects to iPods etc to be displayed on the screen, very quick, no lag

Stickers for buttons are a bit tacky but from a distance looks almost stock

Would highly recommend if you have money to blow

What are the contact/business details?

Wonder if he'd want to fly to Adelaide for a weekend :P

  • Like 1

I spoke to the Russian today and he said that even thou it is a costly exercise he is working on a cheaper solution. He said I needed advanced soldering skills for the current option and its exspensive to buy equipment to do it.

Hi

How can i get in touch with this guy? I have a 370GT 2010 model and my friend has the 2010 model. I would be very interested to convert our cars.

Any help would be appreciated.

You cant, He all ready has someone in Sydney doing the conversions for him. He was just trying to come up with a better solution that may be cheaper.

I was told its exspensive to set up the gear to do it. Hence why only Sydney do it. They have a bigger market.

You cant, He all ready has someone in Sydney doing the conversions for him. He was just trying to come up with a better solution that may be cheaper.

I was told its exspensive to set up the gear to do it. Hence why only Sydney do it. They have a bigger market.

ROAD TRIP!!!!! :)

Really? I must have a freak unit then because I can play all regions and it continues to operate even while driving. I have checked the wiring while I was upgrading my sound system and there weren't any signs of any modification - at least, not externally.

I still haven't pulled my finger out and tried my Mirrorlink device via the AV inputs to see if I can mirror my phone's screen on the in-vehicle LCD but after experimenting with it on my TV, it looks passable and I think I might get away with it after all in the car. I'll give it a crack tomorrow and see if it works or not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...