Jump to content
SAU Community

Recommended Posts

Mirror I disabled. The video input is missing to it. I know WHERE it is in radio as I have the manual for the car but not entirely sure where it is on that car without a lot more time and prodding. If you look closely in the rear camera you will see two systems there. The camera controller on the 2008 is still showing under the 14 one that the radio provides. I could kill the lines in set up but it breaks other things doing so.

I widened the radio lines as they were off center and too narrow.

I checked this out at SEMA today, only designed to work with non navi G37, will definatly NOT work with any JDM 370GT, also i personatly would not replace my std parts with this, it would be lowering the std of the car.

post-2552-0-42842300-1446686570_thumb.jpg

  • 2 weeks later...

The screen that's not factory is an external Miracast box which can have an android phone mirrored to it. Most of them just use the AV inputs so are pretty bad quality wise - and if you don't have the handbrake bypass then you can't have Nav from your phone onscreen while driving.

I still can't believe that there's a software upgrade available to convert to English that's basically pirating and it's so closely controlled and costs a fortune. So frustrating.

Cheers - N

Any of the CDN items are. Straight swap.

That said you can also get a USDM one same swap the centre display out of it into the jap one as well. You still need to buy the full USDM cluster though.

  • Like 1

Any of the CDN items are. Straight swap.

That said you can also get a USDM one same swap the centre display out of it into the jap one as well. You still need to buy the full USDM cluster though.

Thanks Chris.

Does it need to be the same year model or could you drop say a 2011 CDN unit straight into a JDM 08?

Curious as i prefer the newer dash with the white in the centre rather than the red from the earlier models.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
×
×
  • Create New...