Jump to content
SAU Community

Recommended Posts

can i sak what ppl are doing for r34's?

i'm pretty sure someone told me that the plugs a different :P but the sensors are the same size

mine is still cycling high to low but sometimes it hangs and kinda gets "stuck" for a couple of seconds

do i grab a falcon one? or kudos r33 one and cut and shunt the plug?

cheers, Tom

Hey guys is there an O2 sensor in the exhuast as well ? if so does it have to be changed at all ? Ive already had the one in the engine bay replaced... car still running abit rich and this is after a tune as well hmmm

  • 4 weeks later...

Picked up a new one for my ECR33 today from Auto One.

Brand is Walker, $120 and is supposed to be direct fit. According to the box, it's the same as an N14 Pulsar 2.0?

Part no. EGO-018

HAVE NOT tried to fit it yet, will do it on the weekend, but the plug certainly looks the same. Even came with a small tube of anti-seize for the thread. Groovy.

Took photos but my DSLR takes photos that are around 7MB each, so stuff it, you'll live.

lol, same questions over and over. get one regardless of if you think its stuffed or not, chances are it needs replacing. see Kudo's, cheapest and easiest way, they have them for most models. made a world of difference to my R33 S2

  • 3 weeks later...
  • 1 month later...

before wasting money on o2 sensor and all the other junk ... try inflating tyre pressure to 40PSI.

I did that and also changed my coilpacks a couple of months before and used 2 bottles of Nissan injectory cleaner ($10) my 90% stop-and-go-traffic consumption went from close to 17k/100Kms to 14l/100Kms.

I don't know which exactly but I suspect tyre pressure (lower rolling resistance) + injector cleaner did the job.

New O2 sensor and plugs gave my car a massive difference in fuel economy. It never hurts to do the tyre pressures and injector cleaners too, but if you havn't ever replaced your O2 sensor and plugs, do it and you'll see the improvements.

Another vote for Kudos. Great price for their O2 sensor and no re-wiring required. Just plug it in and you're rolling.

O2 sensor related, I recently bought an engine to swap into my car sometime soon and it had an O2 sensor in the standard dump pipe and looked better then the one i had in my car atm, so i swapped it over with my old one.

Now my car runs like shit. it stutters and coughs and wont go anywhere, i throttle it a bit, coughs, then really light throttle it goes normal again, cant even go past 2000rpm then it coughs and splutters and the turbo sounds really weird.

Im going to go for a drive up the street now with the O2 sensor disconnected and see if it changes it, also do i have to reset ecu with a different o2 sensor? (nistune ECU)

another thing,

When its cold (overnight cold) it goes into a weird choke mode? it makes me put my foot down heaps more than usual and you can hear the turbo spooling up heaps loud, the car only starts moving when the boost pressure starts to go past 0, (then i have to back off the throttle as boost+cold engine = bad) its so hard to explain, the ecu stays in this mode until the engine gets up to temp (ie. halfway on temp guage) and while cruising along in 4th at 50km and its up to temp you can feel the ecu turn this mode off and the car runs sweet again.

Anyone else have these weird issues?

Granted that it measures heat only, which is common knowledge, it IS an oxygen sensor.

no mate it isnt. it measures the temp of the exhast gas in the cat because a catalytic convertor only works at a certain temperature. also to the dude that said his a/f ratio of 14.1/1 is lean, actually it is slighty rich. 14.7/1 is the perfect mix (stoichiometric mix) where every atom of air and fuel combines and burns (as long as ignition timing is correct). 14.7/1 is the optimum cruising ratio.

  • 4 weeks later...
  • 3 months later...

i bought my sensor from kudos (great service). once installed, this thing made a HUGE difference. i just recently did a 3hr drive (on the highway) and i averaged 11L per 100 ks (using consult). last time i did this drive it was well over 20L per 100Ks. even city traffic driving im averaging 13L per 100ks. so it has already payed itself off in fuel :thumbsup:

Right now I'm also getting woeful fuel economy. Dunno what it is but I know it's disgusting.

Something that has always irked me about my car is that the temperate gauge needle NEVER sits in the middle. It's half way between the middle and C once warmed up. I presume this isn't normal?

What does this mean in relation to the 02 sensor, anything?

Right now I'm also getting woeful fuel economy. Dunno what it is but I know it's disgusting.

Something that has always irked me about my car is that the temperate gauge needle NEVER sits in the middle. It's half way between the middle and C once warmed up. I presume this isn't normal?

What does this mean in relation to the 02 sensor, anything?

I would imagine it has nothing to do with the O2 sensor at all. However, if your car is not getting up to operating temperatures (water temps should be about 60C for 'operating temperatures'), then the ECU will be in cold-start mode - which is much richer (to warm the car up faster), and this richness results in poor fuel economy.

This could mean you have an issue with your cooling system (thermostat/radiator), or you could just have a dodgy coolant temperature sensor. Shouldn't be too difficult to diagnose, either way. If you have access to a USB CONSULT cable (about $50), you can probably tell if its the gauge or something more (it'll let you read the coolant temperature directly from the ECU).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...