Jump to content
SAU Community

Recommended Posts

Just read the last 20 pages. A lot of people have thrown different theories around with explanations. Maybe they are right or wrong, but the discussions have been enjoyable and valuable I recon, even if we are all wrong.

I'm with you, there has been some good thoughts put on here , thanks :thumbsup:

Just read the last 20 pages. A lot of people have thrown different theories around with explanations. Maybe they are right or wrong, but the discussions have been enjoyable and valuable I recon, even if we are all wrong.

I have been reading, just not posting

Having theories is a good thing but the incorrect one should be recognised as incorrect to move focus to plausible issues so people aren't changing things that don't need to be changed

Like putting a GT42 or V cam on a car that the owner has all alone said he is after response with no shits given for top end

This setup should be at lot more responsive then it is easily beating a stock turboed GTR for response

As I said to Pete while I was there, fix what you know isn't right first before trying something you are not sure is incorrect

As I said to Pete while I was there, fix what you know isn't right first before trying something you are not sure is incorrect

That has always been the plan Mick.

It will go on the Dyno to get another look at it and have a comparison Graph on the same Dyno for when the "final tune" is done :)

Then I guess he will work from there, eliminate the obvious, hopefully it will just be a tuning problem .

The dyno graph is proof, because the the boost peaks then steadily falls away while the power continues to climb and then level out instead of falling off heavily as it would with the massive back pressure this theory implies

The theory would be under the assumption the excess pressure is only against the wastegate and not the turbine which is not the case the excess pressure is also pushing through the turbine increasing its speed and while this is happening on Peters car the boost signal to the wastegate is reducing which reduces the assistance the boost gives the wastegate spring to open the wastegate which increases the wastegate seat pressure which increases the manifold pressure and in turn the pressure at the turbine increasing turbine speed

Or is that wrong ?

My head hurts! As was mentioned earlier, the actual discussion is fantastic as no one is really saying "I know this is the issue" more along the lines of "I believe it is..." so there is no need for anyone to be getting upset about another person offering a solution. It's great that everyone is willing to offer ideas as we've all had varying levels of experience chasing various issues. At the end of the day though, it's not until a decent tuner (that has nothing to hide unlike the previous tuner seems to have...) gets the car on the dyno and properly diagnoses the tune and setup that we're going to really find out what's going on.

One thing that I also need to add is how f**king awesome it is that Peter is a 70 year old bloke with a love of the GT-R that he obviously gets a lot of enjoyment out of. Peter I take my hat off to you and can only hope that my balls don't shrivel up by the time I hit 70 and still have a passion for the amazing vehicle that the Skyline/GT-R is!

Keep up the great discussion, it's what being part of a forum is all about. A lot of you guys have a great amount of knowledge and it's great to be a part of but let's keep all knickers knotless!

  • Like 4

The dyno graph is proof, because the the boost peaks then steadily falls away while the power continues to climb and then level out instead of falling off heavily as it would with the massive back pressure this theory implies

The theory would be under the assumption the excess pressure is only against the wastegate and not the turbine which is not the case the excess pressure is also pushing through the turbine increasing its speed and while this is happening on Peters car the boost signal to the wastegate is reducing which reduces the assistance the boost gives the wastegate spring to open the wastegate which increases the wastegate seat pressure which increases the manifold pressure and in turn the pressure at the turbine increasing turbine speed

Or is that wrong ?

Exactly, turbo speed cant drop like that if there is huge pressure in the manifold.

Compressor out of flow could

My head hurts! As was mentioned earlier, the actual discussion is fantastic as no one is really saying "I know this is the issue" more along the lines of "I believe it is..." so there is no need for anyone to be getting upset about another person offering a solution. It's great that everyone is willing to offer ideas as we've all had varying levels of experience chasing various issues. At the end of the day though, it's not until a decent tuner (that has nothing to hide unlike the previous tuner seems to have...) gets the car on the dyno and properly diagnoses the tune and setup that we're going to really find out what's going on.

One thing that I also need to add is how f**king awesome it is that Peter is a 70 year old bloke with a love of the GT-R that he obviously gets a lot of enjoyment out of. Peter I take my hat off to you and can only hope that my balls don't shrivel up by the time I hit 70 and still have a passion for the amazing vehicle that the Skyline/GT-R is!

Keep up the great discussion, it's what being part of a forum is all about. A lot of you guys have a great amount of knowledge and it's great to be a part of but let's keep all knickers knotless!

haha, your head hurts, mine fell off pages ago :)

I reckon what Lithium said, the 0.84 split housing is probably not big enough, i had one on a 3076 and they are small in comparison to an open 0.82...

On a 3.2L motor the retarding of cams would be to try and help the top end, if they were advanced and the boost didn't fall away ( assuming deliberately done) then it would be getting pretty hot with only 98 wouldn't it? When it was previously backfiring uptop , that might of been some ignition retard from knocking up top with a small rear housing?? You said it was running pretty rich which also would suggest they were trying to keep it cool cause was getting hot in there..

Edited by AngryRB

My head hurts! As was mentioned earlier, the actual discussion is fantastic as no one is really saying "I know this is the issue" more along the lines of "I believe it is..." so there is no need for anyone to be getting upset about another person offering a solution. It's great that everyone is willing to offer ideas as we've all had varying levels of experience chasing various issues. At the end of the day though, it's not until a decent tuner (that has nothing to hide unlike the previous tuner seems to have...) gets the car on the dyno and properly diagnoses the tune and setup that we're going to really find out what's going on.

One thing that I also need to add is how f**king awesome it is that Peter is a 70 year old bloke with a love of the GT-R that he obviously gets a lot of enjoyment out of. Peter I take my hat off to you and can only hope that my balls don't shrivel up by the time I hit 70 and still have a passion for the amazing vehicle that the Skyline/GT-R is!

Keep up the great discussion, it's what being part of a forum is all about. A lot of you guys have a great amount of knowledge and it's great to be a part of but let's keep all knickers knotless!

I to like the throwing around of ideas and theories but unless there is a for and against discussion for them then anyone that reads them that doesn't know leaves thinking they are correct, I think the power of these fors is the back and fourth discussion of theories and ideas

What I don't like and why I am selective in where I post is people that think they are always right and when someone says different or questions them they throw out an insult then throw a tantrum and get upset cause not everyone just automaticly agrees with them

The dyno graph is proof, because the the boost peaks then steadily falls away while the power continues to climb and then level out instead of falling off heavily as it would with the massive back pressure this theory implies

The theory would be under the assumption the excess pressure is only against the wastegate and not the turbine which is not the case the excess pressure is also pushing through the turbine increasing its speed and while this is happening on Peters car the boost signal to the wastegate is reducing which reduces the assistance the boost gives the wastegate spring to open the wastegate which increases the wastegate seat pressure which increases the manifold pressure and in turn the pressure at the turbine increasing turbine speed

Or is that wrong ?

You are making a lot of assumptions as we all are.

If there was excessive back pressure and the gas speed is slowed it would have the same effect but will be more detrimental to the engine.

If the turbine is slowed the boost will drop, that's why we have a wastegate gate and the power still rises with rpm.

But the gate is open by exhaust gas in the manifold, not the boost controller so you can set the controller however u want but the turbo's rear is too small and can't flow enough to evacuate gases which results in a power ceiling and also a gradual reduction in boost.

The fact that boost had to be reduced to settle the other issues supports this to a point.

So in response to Pete questioning why he can't have more power, well that was the rationale because they can't increase boost safely.

The comment about a GT42 was merely to illustrate that people with bigger turbos don't have the issues like he is having.

But he loves the response of his set up, no one is telling him to change it, he just asked many 'why' questions and theories we share and hopefully JEZ can sort it out for him, and when they do we can learn something.

I would be a great car to drive regardless.

  • Like 1

I think I must have given the wrong impression about power, everyone questioned the power I had, I did not have an expectation of much more than what I ended up with , I had spoken to the builder and he said it would be around 400kw and it was, 386.9kw.

But I questioned where the power is and why it drops off. I mean you cannot get any thing spinning at a 5k or 6000rpm launch, a little slip and thats it ,( I do not want to disappear in a cloud of smoke, but ?) I guess it is because the boost has already started to fall off at 4500rpm , maybe also because of better 4WD traction and good rubber, I thought 380KW would be mad :huh:

If it is a bolt on problem, I can change whatever is needed.

But the main thing is to get it in the shop and see how it goes with the mods it has now and see if anything shows up on the Dyno.

He has also used the PT6262 on his stock RB26 and is at full boost around 4300rpm , so he should have an idea how to get the best out of it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...