Jump to content
SAU Community

Educated Guess At The Final Tune Results

Nismo 3.2ish
 Share

Recommended Posts

  • Replies 2.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

XKLABA
XKLABA

They lock them so no one can see their tunes, they did the same thing to my FC and Scott was able to get around it I would have expected more down low then that, you need to get someone else to tune

Nismo 3.2ish
Nismo 3.2ish

Here is the only one I have so far, boring

Nismo 3.2ish
Nismo 3.2ish

It car came up great, only trouble is I have to wear sunnies outside the car, great job but mow I have to try and keep it looking the same , pain in the arse , lol Had a quick run when the car wa

Posted Images

Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
  • Author
Posted
This is on 98 Pump
Here is the overlay of the car as it arrived.
If i hold the car at 3300rpm under load i can get 20psi.
This dyno run is seeing 22psi at 3950rpm and revving to 7000rpm in 5th gear

The Pic is an overlay of the run he did when I dropped it off (green) and today (red)

Not sure when the E85 will be done?

post-52098-0-28129200-1439435816_thumb.jpg

  • Like 2
Mick_o Grand Master

Mick_o

Posted
Posted (edited)

Thats a f**ken epic result Pete!

You're gunna be in for a shock now when you drive it on Petrol let alone E85 lol!

Expect near the 500kw zone on E85 mate.. Congrats and well done to Jezzabelle and the boys sorting out the horrible mess you had! Cant wait to hear your thoughts when you drive it now!

Edited by Mick_o
  • Like 1
Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
  • Author
Posted

Thats a f**ken epic result Pete!

You're gunna be in for a shock now when you drive it on Petrol let alone E85 lol!

Expect near the 500kw zone on E85 mate.. Congrats and well done to Jezzabelle and the boys sorting out the horrible mess you had! Cant wait to hear your thoughts when you drive it now!

Yeah Mate, I knew it was a heap of shit the way it was, and I think this proves it :nyaanyaa:

I think I might start using the seat belt now :woot:

Mick_o Grand Master

Mick_o

Posted
Posted

Don't forget your adult diapers as well as that seat belt!

Yeah i always knew it was POS when i saw the dynosheet let alone your impressions of how it drove!

You wont want to get out of it now mate!

Yeah Mate, I knew it was a heap of shit the way it was, and I think this proves it :nyaanyaa:

I think I might start using the seat belt now :woot:

Nismo 3.2ish Grand Master

Nismo 3.2ish

Posted
  • Author
Posted

So he changed the turbo rear? Good thinking

No, the PT6266 was on it all the time, it was not the PT6262 that was supposed to be ordered, this was the thing I said I would post at the end, but I waited for someone to see it on the Dyno Graph.

When I posted the pic of the 6Boost being installed I had an email from the old builder saying , oh you might notice the Turbo is a different model, I said yes it was noticed and he said that he told me about this when the build was being done, I said I think I would remember that, he said I might have been pissed, good call but that is something I would remember , well , I would think I would remember, hic hic

But all good as it is a better Turbo for the job on the 3.2 , but not for the 2.6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • jtha7
      New r33 owner

      By jtha7 · Posted

      Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...