Jump to content
SAU Community

Recommended Posts

12 minutes ago, SimonR32 said:

I have questions that if answered may cost me a fair bit of money so please don't respond.

Do you have a photo of the turbo on the T88 kit, I also have one but scared of the clearance of the massive EFR?

Do you have a graph from the hubber, although a 9180 on a 2.8L it might give me an indication of similar of a 9174 on a 2.6L?

How can a camera even record at 240p? haha

I posted a graph a page or so ago :) It's kw at all 4 and not all in, he was aiming for 600kw and stopped there for pity for the transmission haha.

 

FB_IMG_1494396321102.jpg

FB_IMG_1494396253907.jpg

Edited by Lithium

Because everyone likes photo's.. this is not my car so details are only 95% accurate.

Nitto 3.2 EFR 8374 1.05 twin EXT gates

~23.5psi back to 21-22 up top on E85

480rwkw (possibly slightly over spinning the turbo but not sure. 6 Speed getrag

18238817_1428452083888259_6496148671670507369_o.jpg

  • Like 5
12 hours ago, acsplit said:

Because everyone likes photo's.. this is not my car so details are only 95% accurate.

Nitto 3.2 EFR 8374 1.05 twin EXT gates

~23.5psi back to 21-22 up top on E85

480rwkw (possibly slightly over spinning the turbo but not sure. 6 Speed getrag

18238817_1428452083888259_6496148671670507369_o.jpg

lot of power for 'only' 23 psi

curious to know whats done to head

7 hours ago, usmair said:

lot of power for 'only' 23 psi

curious to know whats done to head

It's a 3.2. It's going to swallow air alot easier then a 2.6.

Thats 2 3.2/8374's that have returned pretty much the same power for the pressure used.

Got a speed sensor yet?

Turns out Full-Race wanted to share this clip so made an effort and got a higher res version of the 9180 R32 GT-R at Hampton downs, in case people wanted to see it with more than 48 pixels:

 

32 minutes ago, Lithium said:

Turns out Full-Race wanted to share this clip so made an effort and got a higher res version of the 9180 R32 GT-R at Hampton downs, in case people wanted to see it with more than 48 pixels:

 

2.6ltr or 3ltr?

18 hours ago, Piggaz said:

It's a 3.2. It's going to swallow air alot easier then a 2.6.

Thats 2 3.2/8374's that have returned pretty much the same power for the pressure used.

Got a speed sensor yet?

3.2 should just bring it on earlier.  2.6L should still make same peak power if revved hard enough

My gate pressure was approx 21 psi and mine mad 390kw on JEMs dyno and then 500kw on 31 psi on a freak run (call it 490kw) so it is  roughly 9kw per psi which is why 480rwkw on 23 Surprised me.

Rw to awkw could make  diff.

And no on speed sensor. Been flogging it on 30 psi as it is :)

On 12/05/2017 at 2:05 PM, Lithium said:

Turns out Full-Race wanted to share this clip so made an effort and got a higher res version of the 9180 R32 GT-R at Hampton downs, in case people wanted to see it with more than 48 pixels:

 

I didn't know Mr Brooking went single turb......finally got rid of those shite boxe Tomei twins!

.....looks scary, needs more 4wd controller.

Edited by Sub Boy32
  • Like 1
1 minute ago, Sub Boy32 said:

I didn't know Mr Brooking went single turb......finally got rid of those shite boxe Tomei twins!

Pay more attention in my group on Facebook sir.  There was a discussion about the potential change, then on a suitable EFR, then dyno results etc :)

  • Like 1
3.2 should just bring it on earlier.  2.6L should still make same peak power if revved hard enough
My gate pressure was approx 21 psi and mine mad 390kw on JEMs dyno and then 500kw on 31 psi on a freak run (call it 490kw) so it is  roughly 9kw per psi which is why 480rwkw on 23 Surprised me.
Rw to awkw could make  diff.
And no on speed sensor. Been flogging it on 30 psi as it is [emoji4]


The 3.2 might be running high compression which would help it make decent power even at relatively mild boost.
My makes over 525kW at 26psi - RB2530 10:1 not running an EFR though.
17 minutes ago, whatsisname said:

 


The 3.2 might be running high compression which would help it make decent power even at relatively mild boost.
My makes over 525kW at 26psi - RB2530 10:1 not running an EFR though.

 

Fair enough

Finally got my hands on a 34 GTR tail shaft.

Going to do the 34 GETRAG conversion while retaining r33 GTR diff gears for even shorter gear ratios.

8374 with even shorter ratios = super responsive street car :D

9 hours ago, usmair said:

Finally got my hands on a 34 GTR tail shaft.

Going to do the 34 GETRAG conversion while retaining r33 GTR diff gears for even shorter gear ratios.

8374 with even shorter ratios = super responsive street car :D

Come to our next track day in September, real men race on the track not the street :)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...