Jump to content
SAU Community

Recommended Posts

Surplize modapuckers lol

This happened today, driving back from work like a normal person. Doesn't happen when I drive like a complete knob, or launch it at 4k.

Anyhow tried off and turning it off and on, that didn't help ?

20190927_182351.thumb.jpg.89d2e9fbac9571962b60dbe4603e8d16.jpg20190927_182355.thumb.jpg.5b249c4220d6e9f137a7d4c7b2e7435f.jpg

So headed out to pick up the missus in this shit box, and spanked the limiter, she didn't like it.

20190927_190721.thumb.jpg.4c0b0644e7265ffa02003c4e42113485.jpg

 

  • Haha 1
1 hour ago, r32-25t said:

Typical German car

Lol yeah but considering it's not even 1.5 years old with 17xxx kms on it, it's a joke!

Modern German cars have a system built into the BMCs and CAN that turn on one of a set of random errors each 18 months for the life of the car to ensure you get rid of it and buy a brand new one just after warranty finishes.

  • Like 1
  • Haha 3
12 hours ago, Dose Pipe Sutututu said:

Lol yeah but considering it's not even 1.5 years old with 17xxx kms on it, it's a joke!

It’s why as cool as I think the golf r is I’d never own one, I’d look at either an sti or the Hyundai i30N

  • Like 1

Man my back is sore lol. A fixed bucket seat, semis, several solid suspension arms, rock hard suspension but yeah ended up doing over 450km today. 1.5 tanks of fuel later ?

Good drive with @PLYNX and my mate in his R33.

Okay, admittedly it was pretty fun and first time I've actually stretched the new setup with a lousy tune. Shoots flames, 11:1 afrs, lazy 10 to 12 degrees of timing but it is wanting to light up 255 Nankang AR-1 semi slick tyres. Still need to swap out thr gate spring to a softer spring, running a 4 port solenoid and with a 1bar spring there's very limited resolution, kept spiking and hitting engine protection.

20190928_073615.thumb.jpg.d6c60ddfe880fa403698f4b811ab4d92.jpg

  • Like 7

I'm sorry I missed the run.

 

I've spent the day yelling at people and driving back from sunny Singo

 

Glad your beastie got to stretch its legs.

 

What's next for the 33, back in the garage for a spell?

1 hour ago, mlr said:

I'm sorry I missed the run.

 

I've spent the day yelling at people and driving back from sunny Singo

 

Glad your beastie got to stretch its legs.

 

What's next for the 33, back in the garage for a spell?

Umm no idea to be honest, I said I'll try go once a month with @PLYNX but knowing my life, even that would be hard to achieve.

 

And here's a dose video and some gate, wallah swear to god I didn't use the photo illegally (didn't talk or text or use social media) lol

 

  • Like 2
43 minutes ago, Murray_Calavera said:

What spring are you planning to swap to and what max boost are you chasing? 

0.5 bar and will run up to 2 bar.

At the moment trying to command 1.3 to 1.4bar is very challenging. Every 1% to 2% change in duty cycle is jumping 0.1 to 0.3 bar of boost. By dropping the spring you end up with higher resolution. Just some idiosyncrasies with running a 4 port. Running a 3 port but across both ports on the gate is a simpler solution which allows decent control too, but I wanted to try out a 4 port setup, so here I am lol.

1 hour ago, ActionDan said:

Can't for the life of me think why it would be showing signs of fatigue or damage ;) 

Well it's there to use right? lol.

1 minute ago, ActionDan said:

"The brightest candle burns twice as fast" 

That's why people run boosted engines, to get twice the atmospheric pressure :)

 

On 28/09/2019 at 9:16 PM, Dose Pipe Sutututu said:

0.5 bar and will run up to 2 bar.

At the moment trying to command 1.3 to 1.4bar is very challenging. Every 1% to 2% change in duty cycle is jumping 0.1 to 0.3 bar of boost. By dropping the spring you end up with higher resolution. Just some idiosyncrasies with running a 4 port. Running a 3 port but across both ports on the gate is a simpler solution which allows decent control too, but I wanted to try out a 4 port setup, so here I am lol.

Another solution I've come up with for another car I tune which granted, we've not tested yet - and I don't know how flexible the Halaltech is with settings and available outputs, but we're running 2 MAC valves and running one of them against a fixed PWM look up table to "bring up the base pressure", then use conventional boost control to drive the second one as an effort to retain 3-port style table granularity but give a 4-port style boost range.

58 minutes ago, Lithium said:

Another solution I've come up with for another car I tune which granted, we've not tested yet - and I don't know how flexible the Halaltech is with settings and available outputs, but we're running 2 MAC valves and running one of them against a fixed PWM look up table to "bring up the base pressure", then use conventional boost control to drive the second one as an effort to retain 3-port style table granularity but give a 4-port style boost range.

Interesting, is that similar to how anti-phasing works? I hear that terminology thrown around a bit however given we aren't in race cars or F1 cars I've never bothered to read further nor investigate further.

4x port was already going into another level for me haha... 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...