hypergear Posted June 6, 2017 Share Posted June 6, 2017 This is some result form an ATR43SS1 Turbo in bush bearing. It made 227rwkws @ 17psi on Pump 98 fuel. I've used the same turbo with BB core on my R34.2 with an RB20det (running with melted cyc 6) which is very responsive. Green boost curve: Same turbo with BB's core. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833383 Share on other sites More sharing options...
iruvyouskyrine Posted June 6, 2017 Author Share Posted June 6, 2017 About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758. Third pic isn't loading for me either btw 1 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833401 Share on other sites More sharing options...
CEF33Y Posted June 6, 2017 Share Posted June 6, 2017 19 hours ago, hypergear said: Green boost curve: Same turbo with BB's core. So around 900rpm improvement in response from BB core?? Is that a typical result??? seems like a lot *Sorry, should be in hypergear thread On topic, can't wait to hear it with that manifold! Would like to change the manifold on mine, but cant pull the trigger cost wise, just for the noise. If I could justify a jump in performance aswell, I could maybe do it, haha Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833571 Share on other sites More sharing options...
Lithium Posted June 6, 2017 Share Posted June 6, 2017 (edited) 18 hours ago, iruvyouskyrine said: About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758. Third pic isn't loading for me either btw Hitting 15psi by 4000rpm (picked that because the curve to 17psi rolls over a little presumably because of boost control so saying full boost at 4700rpm makes it sound much worse than it is) and making 227kw @ hubs, which is a healthy result - but to be honest, it may be my 16G fanboism coming out but I feel that one of those would happily do that power on 98 too, but with significantly better response. His ball bearing equivalent shows 18psi by 4000rpm, which is more like what I'd expect from the 16G but of course DBB also offers transient response improvements (the old "Dyno doesn't show it" stuff) so that sounds a bit like it'd be quite a nice turbo on an RB20, especially if it's not expensive. Either way, neither turbo are twin scroll - let alone EFRs, so probably a bit off topic here. Edited June 6, 2017 by Lithium Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833572 Share on other sites More sharing options...
admS15 Posted June 7, 2017 Share Posted June 7, 2017 About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758. Third pic isn't loading for me either btwMight be 6 years too late. The date on that graph says 2011, lol. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833584 Share on other sites More sharing options...
hypergear Posted June 7, 2017 Share Posted June 7, 2017 8 hours ago, admS15 said: Might be 6 years too late. The date on that graph says 2011, lol. yes thats when they were first developed.The turbo is ATR28SS15 based, it maxed out at 281rwkws P98 fuel on an worked SR20det, on a stock cammed Rb20det it should be maxing some where towards the 250rwkws depending on mods. I bought a R32 GTS4 late last year and trailed a bunch of other wheel and housing combinations and that is still the best one, BB improved transit response and made the turbo came in with very light throttle movement. Unfortunately I've picked up a bad car, its unfit for the building purpose, I might get another one to continue this venture when I see something come up decent. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7833693 Share on other sites More sharing options...
iruvyouskyrine Posted June 15, 2017 Author Share Posted June 15, 2017 Turbo supposed to be here on the 26th of June so will see how we go. Also my manifold is almost done 2 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7835049 Share on other sites More sharing options...
Wheezy Posted June 22, 2017 Share Posted June 22, 2017 Keen to hear more about the intake manifold and any dramas fitting it up. I've got a complete RB26 intake, throttles etc and adapter plate sitting here waiting to go, just need an RB30 thermostat housing. It will be replacing my current FF manifold so I'm hoping not too many gotchas. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836543 Share on other sites More sharing options...
Dose Pipe Sutututu Posted June 22, 2017 Share Posted June 22, 2017 #twinscrollislife You planning to ceramic coat or wrap that manifold? Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836563 Share on other sites More sharing options...
iruvyouskyrine Posted June 23, 2017 Author Share Posted June 23, 2017 Keen to hear more about the intake manifold and any dramas fitting it up. I've got a complete RB26 intake, throttles etc and adapter plate sitting here waiting to go, just need an RB30 thermostat housing. It will be replacing my current FF manifold so I'm hoping not too many gotchas.I'm using the otaku garage adapter on mine. They fit fine on RB25 but on RB20 there is only a bees dick of clearance to the Thermostat housing. You actually have to scallop the coolant rail that runs under the 26 manifold to make it fit, and even then doing that will be a tight fit. I have some pics of it but they are on my computer, will post them up here when I get a chance Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836597 Share on other sites More sharing options...
iruvyouskyrine Posted June 23, 2017 Author Share Posted June 23, 2017 #twinscrollislife You planning to ceramic coat or wrap that manifold? Neither, it's far too beautiful for that! It should go purple and gold being the hypertune 347ss. If it starts to fade or look shitty after a couple of years I will ceramic coat in titanium. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836598 Share on other sites More sharing options...
Wheezy Posted June 23, 2017 Share Posted June 23, 2017 Are you the guy in the USA who posted much of the same over Facebook?Did you try an RB30 thermostat housing?I'm likely going to order a new genuine one Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836599 Share on other sites More sharing options...
iruvyouskyrine Posted June 23, 2017 Author Share Posted June 23, 2017 Nope wasn't me, I live in the land of the harshest vehicle laws in the world (aka straya) I'm yet to try it as I have been away from the car for 4 weeks but will be getting stuck into it when I get home. I will keep this thread updated for you to follow [emoji106] Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836601 Share on other sites More sharing options...
iruvyouskyrine Posted June 23, 2017 Author Share Posted June 23, 2017 Found the pics@wheezy 1 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7836643 Share on other sites More sharing options...
Wheezy Posted July 7, 2017 Share Posted July 7, 2017 Tight fit! Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7839047 Share on other sites More sharing options...
iruvyouskyrine Posted July 8, 2017 Author Share Posted July 8, 2017 Isn't it just. Hopefully the RB30 outlet works! Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7839082 Share on other sites More sharing options...
iruvyouskyrine Posted August 19, 2017 Author Share Posted August 19, 2017 Getting closer to running [emoji41] 5 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7845460 Share on other sites More sharing options...
R_34 Posted August 19, 2017 Share Posted August 19, 2017 Tons of goodness in here. Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7845462 Share on other sites More sharing options...
iruvyouskyrine Posted August 19, 2017 Author Share Posted August 19, 2017 I don't do things by half measure, except for using a NIStune haha 1 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7845463 Share on other sites More sharing options...
Dale FZ1 Posted August 19, 2017 Share Posted August 19, 2017 Wiggins style clamps = cool Hope there's some flex in the system for when the engine torques over? It's looking good for sure. 1 Link to comment https://www.sau.com.au/forums/topic/469999-rb20-turbo-selection-twinscroll-housing-advice/page/5/#findComment-7845467 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now