Jump to content
SAU Community

Advice/Recommendations: R34 Suspension repairs + coilovers


Recommended Posts

Advice/Recommendations: R34 Suspension repairs + coilovers

Hey guys.

I took my R34 GTT to Pedders for a full Brake, Steering and Suspension check after noticing some changes in my steering and road feedback.

Turns out I need about $1300 in wear and tear repairs, and I also need to replace all 4 shocks.

They said the only company that would make shocks for my car would be Bilstein and I'd need to get their Sports range which would end up costing me a fortune, and I'd be better off getting coilovers.

They quoted me $1900 extra ($3200 for everything) for their own coilovers. But they reckon the maximum ride height of their coilovers is slightly less than my current height (factory height), and I really don't want to lower it (my baby is all stock after all).

  1. I would prefer to get a full coilover conversion than just replace the shocks, but does this mean I will need to lower it a touch?
  2. Are the Pedders coilovers good quality? ie would you recommend them? or if not, who should I look at?
  3. Is the price quoted reasonable?

Thanks for any and all advice!

Edited by Akuma07
Link to comment
Share on other sites

If going coilovers for Street driving, get some mca blues. They are cheaper (around 1650) and would be better than the pedders. I wouldn't be scared of lowering it a touch, say 30mm. If you look hard enough you could probably find some kyb brand standard replacement shocks. Pedders may not be able to get them but they are available. Whatever other components pedders quoted you for could probably be sourced for half the price and fitted elsewhere for a lot less. They do have to make a dollar after all.

 

EBay is your friend to check pricing and for supply of parts. Just stick to the known branded products and reputable sellers. The old way of picking up the phone and ringing around to suppliers can also work well sometimes.

 

 

  • Like 1
Link to comment
Share on other sites

Other places in sydney who can source and it suspension set ups - worth calling/email both to see what they can offer you at your budget.

If you are able to get coilovers, it's always good to try and have it fitted, aligned and if you can afford the $400 extra, cornerweighting which is essentially adjusting the height to fine tune the weight distribution across the front and rear of the car, this can make even cheap set-ups work really well.

 

Sydney suspension

 

https://www.facebook.com/SydneySuspension/?ref=br_rs

Review here - https://www.youtube.com/watch?v=vwfZrxXGTlg&t=450s

 

And Heasmans;

https://www.facebook.com/HeasmanSteering/

Link to comment
Share on other sites

17 hours ago, squareznboxez said:

Other places in sydney who can source and it suspension set ups - worth calling/email both to see what they can offer you at your budget.

If you are able to get coilovers, it's always good to try and have it fitted, aligned and if you can afford the $400 extra, cornerweighting which is essentially adjusting the height to fine tune the weight distribution across the front and rear of the car, this can make even cheap set-ups work really well.

 

Sydney suspension

 

https://www.facebook.com/SydneySuspension/?ref=br_rs

Review here - https://www.youtube.com/watch?v=vwfZrxXGTlg&t=450s

 

And Heasmans;

https://www.facebook.com/HeasmanSteering/

Thanks for that. I might ring up the guys at Sydney Suspension. They've got a lot of good reviews and live right by me.

Link to comment
Share on other sites

Though I'd post in this thread also for anyone out west looking for import mechanics/suspension work.

https://www.facebook.com/TransformanceMechanicalEngineering/

Give these guys a ring, they up your way in springwood, they look after everything from suspension, mechanical work to tuning, they are also dealers for MCA coilovers, could be a good one-stop-shop option for you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yep, I really miss mine. I dont, however, miss it's understeer. Hard to find a genuine 'Sport' model these days. That sounds awesome! Good fun and great result!  I'd love to do a 1/4 in mine now that its reasonably healthy with the tune. I last did a run in my white GTR, I think it was a 12.3 and I can't remember the mph and I think the little E90 might be quicker.
    • FWIW, I made 372kW on a Mainline dyno, with a stock motor (bar head studs & usual bolt ons) on E85 (pretty timid timing in the mid range) and it blew up after a year of track use. Probably got like 5~6 Wakefield track days and 1x skid pan somewhere in between.
    • Plus, if you want to shoot for over 300rwkW, the Z32 won't really cut it and retaining the PowerFC is getting to be a poor choice. You're going to be much happier with management that can actually see what's going on and have a hope of stopping it from going bad when something breaks (think oil pump). So, the $$ situation is probably different to what you think it is.
    • 350-400kw will not keep that basically stock motor basically stock very long, especially for track only use. It will decide to need a rebuild pretty quickly. I'd go smaller, and not cheap out with a Pulsar item based on older tech. Get a G25 550/660. Just better in every way. Don't think about changing a turbo until AFTER you change your injectors (S15 injectors x6? What CC are those?) and coils/fuel pump. They won't keep up with any aftermarket turbo.
    • Hey everyone,   Probably been covered 100 times but i couldn't see anything when searching  Time has come to replace / upgrade my turbo, dont have any crazy plans for the build maybe 350 - 400kw in the future  Engine is a basically stock R33 RB25DET apart from Apexi power FC, S15 injectors, Boost controller, Z32 AFM, Cold air intake, free flow exhaust  have been looking at the Pulsar GTX3076R 0.82 will this be a good option? wont be upgrading the injectors and coils till next year then pushing for 300kw so dont want anything to laggy in the mean time, car is track only not street   TIA 
×
×
  • Create New...