Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
On 7/12/2017 at 10:32 AM, Sack87 said:

 I picked up 7psi of boost without touching a thing, so it's stuck on 21psi with standard injectors and pump. I've hit up Christian to see if it's possible to run the car safely at this level on 98 with his flash tune, otherwise I will probably put a hi-flow cat in to drop the boost a little.

LOL LOL LOL what would Christian know!!! and why would you trust his flash tune meant for a different motor HAHAHA

 

Firstly your not making any power over 16PSI (on a stock turbo) as the turbo cant flow that much air your just producing extra heat.

Go see a real tuner and put the car on a dyno before you punch Piston #6 out of the block like the rest of you new age Stagea owners
and put a 100cell cat on the thing FFS

  • Like 1
15 hours ago, WAGON_BOY said:

LOL LOL LOL what would Christian know!!! and why would you trust his flash tune meant for a different motor HAHAHA

 

Firstly your not making any power over 16PSI (on a stock turbo) as the turbo cant flow that much air your just producing extra heat.

Go see a real tuner and put the car on a dyno before you punch Piston #6 out of the block like the rest of you new age Stagea owners
and put a 100cell cat on the thing FFS

And you know everything I assume, including how to hack and tune a factory Ecu?

Firstly I'm running a Billet Intense RS Turbo and secondly it's safe on 19psi as my AFR doesn't go above. 93v at WOT. 

And it's "you're" by the way. 

  • Like 5
  • Haha 2
  • 1 month later...
3 hours ago, Ben C34 said:

Does that actually achieve anything? Or just theoretical?

No idea haha, most probably not but it cost me nothing to make.

The more the better theoretically. I wanted to make up one that picks up several points but theres just no room under the car.

  • Like 1
  • 5 weeks later...

Interested in an Intense turbo and am running Itsrom ECU atm. I am getting just over 17psi atm (according to an autobarn gauge) using Scottys dump and front pipe and a Nur tailpipe. The car is vastly improved by Itsrom and has standard intake currently. Was thinking about Scottys Intake or an AMP one and wondered how you got on with yours? People talk about fuel cut and I figure the Intense and an intake is going to get there. You did not mention this so I was wondering what you did ... Thanks

3 hours ago, leigh308 said:

Interested in an Intense turbo and am running Itsrom ECU atm. I am getting just over 17psi atm (according to an autobarn gauge) using Scottys dump and front pipe and a Nur tailpipe. The car is vastly improved by Itsrom and has standard intake currently. Was thinking about Scottys Intake or an AMP one and wondered how you got on with yours? People talk about fuel cut and I figure the Intense and an intake is going to get there. You did not mention this so I was wondering what you did ... Thanks

I've had no issues at all with my setup and haven''t had it fuel cut once.

  • 2 months later...
17 hours ago, Skylinefreak1 said:

That's some fancy fab work mate! Looks great! Anything else done recently?

Thanks mate.

I recently bought a TIG welder so I can do aluminium work but mostly to fix up my rear subframe as it's cracked.

I've got a few things in the works including building a new engine soon as the current one is cactus. Just trying to keep this one going until the other engine is ready :654_bomb:

So this is what I have in the works currently and I just tick along with them.

Designed and 3D printed a pistol grip style shifter. Unlike the generic ones you can buy, this one slides on like the factory one and uses the circlip to hold it on snug. The cover at the base fits like a glove but I was limited to how much radius I could put on the shifter to match the cover.

A2kDSB.jpg

I finalised the design of my 3D printed catch can so just waiting on fittings to come so I can hook it all up and test out how well the ABS holds up to heat and fumes. The fitting by itself replaces the factory PCV and I had to get that from the states.

E0CfUe.jpg

The catch can is fully baffled inside and just requires some steel wool and the other baffle to be fitted.The top had to be removable as you can't print a baffle inside and object and know if it has printed properly.

MQhFho.jpg

If the 3D printed one doesn't work, then I have all the individual pieces cut up ready to be fabbed up. This will be my first TIG welding project since buying one as I have only used MIG.

GstTjD.jpg

To get the fumes to the catch can location I made up a steel hard line that goes from the passenger cam cover, along the fuel rail and follows behind the timing cover.

v319dI.jpg

Knocked up a cooling mod but mine uses an SOS fitting as the bleed point. If your're familiar with Caterpillar mining equipment then you'll know why I chose this!

l8AVAt.jpg

To go along with that I bought a generic breather tank setup that will most likely go above the passenger cam cover. This is the highest point in the engine bay, has the most room and is easier to tap into the bottom rad hose.

y4E2oc.jpg

After doing the rear rotors I saw that the subframe was cracked on both sides pretty badly, also another reason why I bought the TIG welder. I made up a cardboard template and the aluminium I transfer that to will get welded in for more strength.

Y9EZow.jpg

And most recently I had a knock senor code throw up after handling the harness. Found this just hanging out in the valley.

OfV3xj.jpg

Plan is to buy another harness and re plug the whole thing as most of the connectors are breaking apart or already broken.

  • Like 2
21 hours ago, myothercarsa2cv said:

Amazing work Brendon as ever! Some tasty parts there that I’m sure a few of us would be interested in if you wanted to make some more... ;)

I plan on making some of this to sell in the future but I want to run it on my car for a bit to see what works and what doesn't.

I may make up a different catch can setup that uses easier hose routing but it means you can't run the turtle shell. 

Edited by Sack87

I got my hose fittings yesterday and fitted the catch can. I'm not 100% sure I like this location now as the lines are just clearing the bonnet as they are sitting on top of the overflow bottle.
E0LHzK.jpg

PCV delete and hose fitting just have enough room with a 3" intake
Tx3kdJ.jpg

I will need to beef up the lid bracket and slightly adjust it as it snapped when moving it around. You can also just see the breather hidden away under the guard. I will move this too as it fouls on the guard liner.
zPn8ra.jpg

  • Like 2

Really neat and nicely packaged. Shame there’s not a lot of room in our engine bays, would make life a little easier!

Is the PCV delete worthwhile? I’d have thought the breathing would be better with it in place?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...