Jump to content
SAU Community

Recommended Posts

Ok need help peeps about to turbo my r34 na rb25de running auto ecu just converted to Manuel can i use auto na ecu and piggyback a emanage ecu for timing fuel and air etc seen people saying auto box gives out etc as ecu for box is 1 aswell but im manuel now? Do i need a nistune or no? Stock boost gtt injecters 255pump etc ?

received_1717788698341275.jpeg

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/
Share on other sites

Nistune would be smarter than any piggyback crap.  The NA ECU should be able to do what you need - doesn't matter that it was auto.  Nistune will actually help you to get rid of codes that the ECU will probably throw from not having the auto's TCU on-line.

If you have to buy injectors, don't buy stock DET injectors.  Buy some brand new Bosch injectors (or similar) from Scotty (or similar).

Any big pump will do.  The 255 is reasonable, but there are newer Walbros that better suit E85, for some future proofing.

If you do use Nistune, grab a Z32 AFM, or an R35 blade AFM and fit that instead.  No point hamstringing yourself with the NA RB25 AFM.

And upgrade the brakes.

And fit an LSD.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881579
Share on other sites

The emanage kit comes with loom etc all that and can plug straight into my laptop ..can i do that with a nistune? Looking fo cheap option as will get det soon so was thinking emanage n tune my self all under 500 where as nistune is 400ish yeah? Then pay for a tune?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881587
Share on other sites

11 hours ago, AngryRB said:

I run flex fulltime with no issues, i can check knock and sensors are working and is easy for my tuner to play with.

Does the job for $600.

You mean you run E85 full time.

PowerFC can't even cut power when you're above a particular load point, it can't even cut power when you've exceeded a particular engine water temperature.

I think you need to admit now that it is a pretty basic ECU.

Nistune can do full flex blending (PowerFC cannot), Nistune has basic engine protection (PowerFC will grenade your motor), Nistune you can vary your VCT (PowerFC you cannot), Nistune has launch control (PowerFC does not have), Nistune you can fully map the DC for the boost solenoid (PowerFC you cannot).

So tell why the PowerFC is better? Because of its useless hand controller?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881705
Share on other sites

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881708
Share on other sites

30 minutes ago, Kinkstaah said:

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

If that's the case GTt ones are dime a dozen, everyone going Halaltech or Link or Motec or ECU Master or Syvecs these days.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881713
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...