Jump to content
SAU Community

Recommended Posts

Hello every,

Cool site here.

Ive read through lots of stuff here, older stuff and have some questions.

I am going to buy a R32 GTST or a GTR if I have the money.

 

If I get a R32 GTST and dont do the RB25 swap, with the stuff thats out today,{turbos, etc} is there any way to make the GTST with 400-450 hp and be responsive on the street so Civic Type R's and 370's arent blowing by me?

If I get a R32 GTR, is there any way to make a good 500-600 hp and have decent torque for the street?

 

Edited by Yoshiii
Link to comment
https://www.sau.com.au/forums/topic/480467-questions-about-r32-gtst-and-gtr/
Share on other sites

8 hours ago, UWISSH! said:

T51r is the answer to all your questions 

Will check it out

7 hours ago, Dose Pipe Sutututu said:

T88 turbo, journal bearing with open scroll.

Will check it out

6 hours ago, mlr said:

 

Yes, there we go 

 

Thank you for the inputs.

I will check these out.

 

I need to buy the car first but want to research now.  

 

RB 20's are liked in the states.   But I keep reading that RB25's are better for the 32.

 

 

  • Haha 1
12 hours ago, Matty George said:

Just need to upgrade hot side for GTR and ECU upgrade. Simple. Won’t get 500 but will be fun enough.

Not too hard I guess.  Do you mean to upgrade the exhaust?  As long as it will perform well.

If your in 'merica, drop a crate LS in the R32 GTST.

Or at least a RB25.

Personally, the only money I would spend on a RB20 would be to service it.

If you want fast, the RB20 is a poor starting point.

Unless you want original, then, just service it and don't race anything faster than a Toyota Yaris.

If you don't use a crate LS, send one to me, thanks....

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...