Jump to content
SAU Community

Recommended Posts

Nothing "wrong" with it if you require it for your purpose, like actual motorsport. The original point was about billet blocks being like sequentials following the "image of cool" nowdays. Nice to have, but hardly necessary for non motorsport street cars.

Which is back to the original question of why the OP feels he requires a billet over cast block.

Now that we've derailed this thread about billet blocks, does anyone know if the PPG or stock ratios are better for the stock 5 speed in the R32/R33 GTRs? I'm looking for a synchro transmission and I don't think I can afford the expense of doing a V160 swap properly.

8 hours ago, BK said:

I know billet blocks are good for rigidity when making massive power, but I was asking specifically the OP why he feels he needs / wants a billet block. Does he want 2000hp or just bragging rights ? Plenty of big power RBs not using them and new RB26 blocks are pretty affordable.

Hi there, I've been using the current engine for 5 years now. It's running fine and doesn't give me any trouble. I use it as a DD as well as tracking it 5-6 times a year. It's running E20 and is making 700hp on twin 6258 EFRs. The HKS 2.8 kit hasn't give me any problem and currently it is running fine. I feel time is approaching for a replacement block so why not go for a bit of an upgrade. While the limitation of the HP is not the block right now, it is the fuel I use, beside I don't need anymore HP, it is plenty fast, but I want the same reliability and maybe a bit more boost doesn't hurt :-).  The current RB engine are quite expensive now so I don't mind spending a bit more to get a lighter and stronger engine but if it comes with compromising the reliability or heat issue I'm not going to buy it and so far I haven't really got a straight answer from the shops so I'm asking the owner/s who had bought one if my concern is ligitimate or not. 

Thanks

Tobey

Let me explain a bit more of the weather condition in my country. It gets to 40+ Celsius for 1-2 months a year and I get stuck in traffic sometimes 30 minutes to one hour.  There are many cars on the road and you can't really drive to dissipate heat like in the VDO above. It's also quite humid. 

I heard in the VDO at 2:55 that the engine runs at 83 degree. Let's say the temperature in NSW on the day of filming is around 25C, seeing they open the window it might be cooler, but if your add 10 degrees to that, with the condition coolant will be at 93 degree. For me, for a car running around with wind blowing that temperature is pretty high. I haven't considered the fact that the hotter the temperature the harder it is to dissipate heat and I haven't even added traffic and heat of other cars to the equation because when in traffic that is when it heats up very fast. 

I guess I found my answer but to be fair it does also depends on how the ventilation of the car is set up.

I'm not here to bash the billet block. I genuinely want one but I have to play a role of skeptic here.  

17 hours ago, kaboobie said:

Let me explain a bit more of the weather condition in my country. It gets to 40+ Celsius for 1-2 months a year and I get stuck in traffic sometimes 30 minutes to one hour.  There are many cars on the road and you can't really drive to dissipate heat like in the VDO above. It's also quite humid. 

I heard in the VDO at 2:55 that the engine runs at 83 degree. Let's say the temperature in NSW on the day of filming is around 25C, seeing they open the window it might be cooler, but if your add 10 degrees to that, with the condition coolant will be at 93 degree. For me, for a car running around with wind blowing that temperature is pretty high. I haven't considered the fact that the hotter the temperature the harder it is to dissipate heat and I haven't even added traffic and heat of other cars to the equation because when in traffic that is when it heats up very fast. 

I guess I found my answer but to be fair it does also depends on how the ventilation of the car is set up.

I'm not here to bash the billet block. I genuinely want one but I have to play a role of skeptic here.  

The question is really more why do you want a billet block? They're designed for 1200+ hp builds. The liners are extremely thick and the water jacket doesn't do as much as it does in the stock block which is a closed deck that reduces coolant flow.

You should really consider what this car is going to be used for. If it's going to be idling in traffic all day that means keep the power relatively low to reduce cooling load on the engine, keep the OEM water pump, big radiator, stock clutch fan with fan shroud, proper radiator ducting. All of those requirements point towards either OEM or N1 block. It would be cool to have some billet aluminum block tailored for say 600 whp max as a "street oriented" block but the people willing to put down 10-13k USD on a billet block usually want big power, not just removing ~30 kg from the front of the car.

9 minutes ago, joshuaho96 said:

The question is really more why do you want a billet block? They're designed for 1200+ hp builds. The liners are extremely thick and the water jacket doesn't do as much as it does in the stock block which is a closed deck that reduces coolant flow.

You should really consider what this car is going to be used for. If it's going to be idling in traffic all day that means keep the power relatively low to reduce cooling load on the engine, keep the OEM water pump, big radiator, stock clutch fan with fan shroud, proper radiator ducting. All of those requirements point towards either OEM or N1 block. It would be cool to have some billet aluminum block tailored for say 600 whp max as a "street oriented" block but the people willing to put down 10-13k USD on a billet block usually want big power, not just removing ~30 kg from the front of the car.

Thanks for the response. I do half track half street driving on this car. For street you can't really avoid congestions in the heart of Bangkok. As for cooling, I still have the clutch fan, an oil cooler with a small fan, HPI 3 way radiator with the biggest cfm fan out there, as well as an extra small coolant cooler with fan. The airflow has also be designed to get ride of the heat while driving. The car is cool right now. I figure I can take on a bit more heat while removing the weight off the car as there is nothing else that I can do to improve the car within the limit that I want it to be. The weight should improve the handling of the car some what but I'm not willing to sacrifice the reliability issue for it. 

You are right that people are not willing to put down that much money for just weight reduction, as a replacement to a stock streetable block. As the stock block continue to go up in value, if these shop advertize that billet block is replaceable to the stock block it should have better cooling than the stock block and have other better design features, which when I asked they refused to do it. 

3 hours ago, kaboobie said:

As the stock block continue to go up in value

umm, no they are not going up in value. Brand new RB26 05U blocks are about $3500AU. They've been about that since as long as I can remember. That's a big difference in price to a Bullet billet RB26 block at around $14000AU (Not $13kUSD - don't know where that came from).

Yeah huge cost and for what - why not just use a PRP Block brace and machine a new block?

i feel for your street car with odd track day you will keep block twist to a minimum and save a tone of cash in the process and could still throw a few extra PSI at it.

On 02/12/2020 at 9:35 AM, Kinkstaah said:

Do not underestimate the hardpark instagram peer pressure. It is very real.

Fully this. Technology/development has come such a long way in the last few years. Making '1000hp' is much easier than it used to be. Fact is people expect a lot from built engines and they are pushed to the limit. Guess what, they break. They all do. After you have sunk 30k, 40k, 50k (and the rest) and you have a failure, it all becomes very hush hush. People only see the timeslip and ridiculous MPH and think wow. what a street car, when in fact they have lunched multiple engines to get there or have spent another fortune chasing that tenth.

Any of these high powered cars are very much not street cars despite what people portray on so social media. Driving it to work once then doing highway pulls on the odd saturday night does not make it a street car. It's a race car with rego plates. If a highway patrol pulled you over, youd be f**ked. 

Get a billet block, fill it with expensive gear and send 70psi through it. Please tell us how it goes.

  • Like 4

Why do Australians love to talk in HP when for everything else we use the metric system?

Remember when NASA lost a spaceship because some fk tards at Lockheed Martin decided to send calculations in imperial shit?

Space vacuum = 0 kPA
Earth = 100 kPA
Sick RB = 400kPA

It's like when American morons tell you water boils at 212 degrees, just sound so stupid, water freezes at 0 degrees C and boils at 100 degrees C - so logical.

HP is like measuring your dick from your arsehole.

 

  • Like 1
  • Haha 3

Horsies are more powerful than killer wasps naturally!

Old mate should go for an investment cast block as per proper practice, ha. There's that many donkeys with cnc mills turning out engines with superfluous casting features carried over and a few with poor alignments, I would be hesitant to lay hard currency down.

A pet hate is the use of billet in the automotive world, but that's a losing battle, might as well call it, dumb cee you next Tuesday, aerospace grade.☺️

Edited by 2pee
  • Like 1
17 minutes ago, Dose Pipe Sutututu said:

HP is like measuring your dick from your arsehole.

Now that is GOLD Johnny !

Ive just laughed so hard I wizzed myself !

Are you gonna yell at me if I mention the Europeans use PS as a measurement of engine power as well ? ? ?

But seriously for the amount of cash that you would throw out there Id rather try and pull weight out of the car and look at carbon fiber doors, super light weight wheels and light weight seats to save 30-40 kgs and end up with change !  

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...