r32-25t Posted November 11, 2021 Share Posted November 11, 2021 You don’t need oil restrictors in garret turbos and the power figures and etc I quoted are from experience and not from reading stuff on the internet Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957679 Share on other sites More sharing options...
joshuaho96 Posted November 13, 2021 Share Posted November 13, 2021 On 11/11/2021 at 3:04 PM, r32-25t said: You don’t need oil restrictors in garret turbos and the power figures and etc I quoted are from experience and not from reading stuff on the internet There is a built in restrictor on the GT2860/GT2859, but there's some asterisks there. If you run more oil pressure than stock, if you change the feed lines for some reason to a larger diameter, variables like that can require you to run an additional restrictor. Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957698 Share on other sites More sharing options...
RB25DETonation Posted November 13, 2021 Share Posted November 13, 2021 On 09/11/2021 at 1:48 PM, Dose Pipe Sutututu said: Buying these cars requires a type of mindset, at times I think buying any JDM requires some form of slight mental retardation. I'll use myself as an example, buys a $5k R33, spends over $70k on it (I have a full spreadsheet of every part/machining/fab work that has been done/bought for the car. That list does not include anything maintenance related and the endless workshop hours, dyno hire, etc.) over the past 9.5 years. There are days I regret it and wish I bought a M3, there are days I marvel at the beauty of the heap of shit. Lol so true Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957714 Share on other sites More sharing options...
The Skyline Guy Posted November 14, 2021 Author Share Posted November 14, 2021 I hear some of you say its a no brainer going single turbo but my reason for upgrading the twins is because its cheaper, easier to do (?) and because it looks stock and therefore I wont have any problems at the MOT wich is very strict here. On the other hand it would probably be better going single because of better power, sound and less problems overall with heat ect.. If I were to go single, what is the best turbo kit for r34 gtr out there? Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957733 Share on other sites More sharing options...
Duncan Posted November 14, 2021 Share Posted November 14, 2021 Personal opinion but I think the days of putting singles on GTRs is over for most people. They have clearly become a classic/collector's car rather than something where you are looking for a very fast daily driver (plus, most of the GTRs with singles live in a garage on stands anyway). A set of old fashioned -7 or -9 twins and keeping the standard intake piping as mush as possible is they appropriate way these days. 3 1 Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957735 Share on other sites More sharing options...
GTSBoy Posted November 14, 2021 Share Posted November 14, 2021 I find it hard to believe that there are GTRs out there with the standard turbos still on. I cannot imagine how anyone could have put up with them for this long. 1 Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957738 Share on other sites More sharing options...
choyda Posted November 14, 2021 Share Posted November 14, 2021 On 11/15/2021 at 9:00 AM, GTSBoy said: I find it hard to believe that there are GTRs out there with the standard turbos still on. I cannot imagine how anyone could have put up with them for this long. Agreed! Its also the risk of the ceramic wheels that drive the need to change Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957739 Share on other sites More sharing options...
cliptonz1 Posted November 15, 2021 Share Posted November 15, 2021 On 15/11/21 at 3:51 AM, The Skyline Guy said: I hear some of you say its a no brainer going single turbo but my reason for upgrading the twins is because its cheaper, easier to do (?) and because it looks stock and therefore I wont have any problems at the MOT wich is very strict here. On the other hand it would probably be better going single because of better power, sound and less problems overall with heat ect.. If I were to go single, what is the best turbo kit for r34 gtr out there? Either precision 6466 T4 .84/1.00, gtx3582 gen 2 .83 or g35-900 .83. Still a decent size turbo with good response and make power. These are the kits below come with everything you need to do a swap https://www.golebysparts.com.au/collections/rb20-25-26/products/turbo-kit-nissan-rb20-25-26-garrett-g35-900-1050-6boost-manifold-turbosmart-50mm-gen-v-wastegate?variant=39564236914875 https://www.golebysparts.com.au/collections/rb20-25-26/products/turbo-kit-rb30-garrett-gtx3582r-gen-2-ball-bearing-6boost-turbo-manifold-turbosmart-50mm-genv-wastegate?variant=15660088950893 https://www.golebysparts.com.au/collections/rb20-25-26/products/turbo-kit-rb20-rb25-rb26-precision-6466-gen2-6boost-turbo-manifold-turbosmart-50mm-genv-wastegate?variant=31400803270765 Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957753 Share on other sites More sharing options...
niZmO_Man Posted November 15, 2021 Share Posted November 15, 2021 On 15/11/2021 at 10:00 AM, GTSBoy said: I find it hard to believe that there are GTRs out there with the standard turbos still on. I cannot imagine how anyone could have put up with them for this long. I still have them standard ECU standard engine (restrictor removed from the bleed valve thingy). I even run (barely) Yellow Jackets Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957758 Share on other sites More sharing options...
GTSBoy Posted November 15, 2021 Share Posted November 15, 2021 Yeah, well, I should avoid chucking stones inside my glass house. Standard turbo still on my Neo, for example. But it's not quite the same level of suck. Actually, it probably is. But it's not a GTR. A GTR deserve a lot more turbo. Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957759 Share on other sites More sharing options...
Kinkstaah Posted November 15, 2021 Share Posted November 15, 2021 On 11/15/2021 at 11:07 PM, GTSBoy said: Yeah, well, I should avoid chucking stones inside my glass house. Standard turbo still on my Neo, for example. But it's not quite the same level of suck. Actually, it probably is. But it's not a GTR. A GTR deserve a lot more turbo. I think it's the other way around. The Neo is a better motor, and the turbos that come on stock way way way way way way way too small. It's not as though the Neo has a 270kw turbo setup on there from the factory like the 26 does 😛 Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957763 Share on other sites More sharing options...
GTSBoy Posted November 15, 2021 Share Posted November 15, 2021 RWD R32 with a lot of power is just wheelspin city, if it is also set up to go around corners. Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957764 Share on other sites More sharing options...
The Skyline Guy Posted November 15, 2021 Author Share Posted November 15, 2021 On 11/11/2021 at 11:28 PM, r32-25t said: -7s are the r34 n1 turbos (and the nismo r1) they are direct bolt on and will make 500hp at the wheels with e85 and cams -9s are the same as hks gtss turbos are will bolt also bolt directly on and make the same power as the -7 (some believe with slightly better response) the -5 is slightly smaller then the hks 2530 and are a lot more laggy then the -7/-9s, they require different oil drains that are easily sourced which then makes them a bolt on turbo and can make more like 600hp at the wheels if the rest of the set up is done right So the -7 is the same as the original r34 gtr turbos just with bigger upgraded turbine wheels and ball bearing? Does that mean I can re-use the oil and water lines/hoses and banjo bolts? Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957765 Share on other sites More sharing options...
GTSBoy Posted November 15, 2021 Share Posted November 15, 2021 On 11/16/2021 at 5:49 AM, The Skyline Guy said: original r34 gtr turbos Not vanilla. N1 turbos. Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957766 Share on other sites More sharing options...
r32-25t Posted November 16, 2021 Share Posted November 16, 2021 On 16/11/21 at 6:19 AM, The Skyline Guy said: So the -7 is the same as the original r34 gtr turbos just with bigger upgraded turbine wheels and ball bearing? Does that mean I can re-use the oil and water lines/hoses and banjo bolts? Yes they all bolt straight over Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957770 Share on other sites More sharing options...
Dose Pipe Sutututu Posted November 16, 2021 Share Posted November 16, 2021 On 15/11/2021 at 11:04 PM, niZmO_Man said: I still have them standard ECU standard engine (restrictor removed from the bleed valve thingy). I even run (barely) Yellow Jackets wallah you want a Nistune? pull out your ECU and we'll get it done through my trade account Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957774 Share on other sites More sharing options...
joshuaho96 Posted November 16, 2021 Share Posted November 16, 2021 On 11/14/2021 at 3:00 PM, GTSBoy said: I find it hard to believe that there are GTRs out there with the standard turbos still on. I cannot imagine how anyone could have put up with them for this long. My R33 had standard turbos when the engine was pulled as a part of the chassis refresh. I didn't trust them though and never drove the car with them. On 11/15/2021 at 11:19 AM, The Skyline Guy said: So the -7 is the same as the original r34 gtr turbos just with bigger upgraded turbine wheels and ball bearing? Does that mean I can re-use the oil and water lines/hoses and banjo bolts? The -7s are R34 N1 turbos, but R34 N1 turbo covers something like 3 distinct part numbers. The -7s I believe correspond to 14411-AA403. If you ask Nismo they believe that the -7 spec turbos have worse transient response if you're aiming for relatively low power, hence why they released the R3 turbo kit recently which is closer to the earlier AA401/AA402 turbos: https://www.nismo.co.jp/products/nismo_parts/NEW_PARTS/index_2021.html#a22 Their 450 PS claim includes a healthy derate from what the turbos are capable of pushed to the limit, it's also using an engine dyno: Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957782 Share on other sites More sharing options...
niZmO_Man Posted November 16, 2021 Share Posted November 16, 2021 On 16/11/2021 at 2:09 PM, Dose Pipe Sutututu said: wallah you want a Nistune? pull out your ECU and we'll get it done through my trade account I actually have a broken Nistuned ECU. But yes need to Nistune. Also Need to throw on the R34 N1 turbos and oil cooler, then I'll contact you hehe 1 Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957788 Share on other sites More sharing options...
The Skyline Guy Posted November 17, 2021 Author Share Posted November 17, 2021 Just to be sure before I buy, can someone verify that this is the right -7 that I need: https://www.ebay.com/itm/303055603645 Will 340lph fuel pump work for 500+ crank hp, like this AEM one: https://www.ebay.com/itm/323980413969?epid=1217828034&hash=item4b6ebccc11:g:mH4AAOSwnxxdzcru Will this just mount right in the tank or do I need some different hoses, connections ect? Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957823 Share on other sites More sharing options...
r32-25t Posted November 17, 2021 Share Posted November 17, 2021 That’s the right part number but that listing looks dodgey as f**k Link to comment https://www.sau.com.au/forums/topic/482991-going-for-500hp-need-advice/page/3/#findComment-7957824 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now