Jump to content
SAU Community

Recommended Posts

Liberty make transmissions for RB 25/26. basic unit is rated for 1500hp and next one up is 3000hp. Come in 3,4,5 speed and unlimited ratios. Clutchless. Prices are in USD but still seem way cheaper then any sequential. These things seem to be just about unbearable. Why isn’t any one using one in a GTR?
 

 

15 hours ago, khezz said:

Liberty make transmissions for RB 25/26. basic unit is rated for 1500hp and next one up is 3000hp. Come in 3,4,5 speed and unlimited ratios. Clutchless. Prices are in USD but still seem way cheaper then any sequential. These things seem to be just about unbearable. Why isn’t any one using one in a GTR?
 

 

Supposedly those are drag-only and can only be shifted up. To go back down a gear requires going into neutral to reset the shifter then trying to rev-match your way into the desired gear.

  • Like 1

Well I’ve sent them a message asking if the transmissions in question are streetable and what’s involved in fitting one. We will se what happens. I’m still surprised that none of the dedicated drag cars run them if they are a proven product in much much faster cars. 

  • Like 1

Surprised this hasn't been mentioned, they pop out of gear if you let go of the shifter. So yeah, hand off the shifter and your back in neutral. 

So no, not a streetable gearbox for this reason and all the other reasons listed above. 

With the way people have to fight the steering wheel in these cars to keep them straight, I’d hate to be having to do that with one hand because of not wanting to end up in neutral if I use both 

also if you miss a shift, it’s a rebuild and you need to cut a big portion of the floor out to get everything to fit 

  • Like 1
On 19/03/2023 at 9:16 PM, GTSBoy said:

It's totally streetable. It's just that the streets are pretty short and have lots of concrete barriers, lights and a return road.

So applicable... if you live life [drive?] a quarter mile at a time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...