Jump to content
SAU Community

Recommended Posts

That thing rips to 100kph. Not so confident about racing them anymore ;)

People who said you should have changed faster to second have obviously never driven a manual commy. :) They're not the easiest or friendliest gear shifts.

My mates VU SS was about dead even with my exhaust equipped Sr20DET silvia and he just had extractors. Pretty impressive stuff.

You gotta hand it to the big two though, their cars have come along in leaps and bounds while the Japs seem to be getting all sensible on us.

That clubby looks horn, swap for R32? :)

  • Replies 321
  • Created
  • Last Reply

Top Posters In This Topic

Wow, a lot of people "stroking" themselves in this thread. Lots of "big" words used as well. Popular words used...ME....MY......Think there is a common denominator here...anyone know what it is?

Should we talk in third person? :)

Damn, dumping the clutch at 7000rpm. No wonder you get such a huge jump ahead at starts. That's gotta hurt. Don't you get concerned when you smell the burnt clutch coming from your air vents?

I did it for about 6 months on a standard clutch and it was fine, although as you have said it did smell a bit, however with the hd clutch it never slipped and never smelt and that was doing it regularly for 6 months (almost everyday- its addictive- better than taking drugs)

Wow, a lot of people "stroking" themselves in this thread. Lots of "big" words used as well. Popular words used...ME....MY......Think there is a common denominator here...anyone know what it is?

Please elaborate. I don't completely get what you're trying to say but I'll have a guess. Are you saying that everyone who has replied in this thread are self centered?

If you read my initial post I did ask Gtst and GTR owners for their opinion of their car so shouldn't you expect them to reply comparing their rides with mine?

All I get from reading the responses from this thread is that everyone is willing to talk civily about the cars that interest them. Most people who go to these type of forums have a passion for their rides and it shouldn't be a surprise to you that they like to talk about them. This thread has not turned into a bitching session so would you rather read posts that just attack people?

Sorry if I've interpreted what you've said incorrectlly.

I did it for about 6 months on a standard clutch and it was fine, although as you have said it did smell a bit, however with the hd clutch it never slipped and never smelt and that was doing it regularly for 6 months (almost everyday- its addictive- better than taking drugs)

I'd say! Bloody addictive, until the gearbox decided to die :)

Still better than WRX's though! :wassup:

Vuster, 90% of the time on here is spent "filtering" so just ignore anything you prefer to.

Other forums are far worse though.

So that vid was done in a manual or an auto (did I miss something) as I saw the shift bizzo and the led screen with 6 gears and the little shift stick piccie. I'm guessing a manual. How is it to shift? I heard they were a bit sticky with that model Getrag.

There was an GTS Monaro at Eastern Creek yesterday, it was a well sorted car, with bolt on mods and a tined ECU, and listening to the idle had something going in the cam dept. So would have had a good +rwkws. Had the HSV 6 pot APs, and sorted susp.

It was a real quick car, and in the wet had awesome grip thru the slow corners...it will be in the Sydney Dutton, will be interesting to see how it goes in the V8 class. In the dry i may have been close, but in the wet where a cars true handling attributes arent masked by good rubber i was an oversteering horse:(

So anyone that doubts a Holdens abiloity to motor, needs to try and keep up with this thing....bang for buck its probably better then a GTST, maybe even GTR , though the initial purchase price is a bit exxy when compared to GTST/GTR

Vuster,

Here's a little vid of an R32 GTST Rb20DET running 1bar, 3" turbo back exhaust & FMIC. Stock ECU, Stock Airbox & filter it made 164rwkw.

The launch isn't the best as it bogs down a little, best 0-100 I was able to achieve was 5.2secs with a 4000rpm launch & clutch slip.

Often than not it was around the 5.5secs, if it wheel spun up around the 6sec mark.

Compared to the 6ltr the RB20DET sounds a little Asmatic. :D

Damn LS2 6500rpm, thats pretty damn nice rev's.

The R32 previously had a little play with a 280kw 6speed Clubsport rolling from around 30km/h, the LS1 was slightly quicker around the 60km/h mark however the R32's mid range through second and third was a tinny tinny quicker, by the time 4th was selected around 150km/h the LS1 was sitting level with the rear bumper.

None the less its a pretty damn good effort from such a mildly modified R32.

I can sympathise with you with regards to the off the line acceleration. I ditched the Rb20DET for this reason and dropped in a RB30DET that is much much better, stock turbo it currently makes 100rwkw at 2000rpm but runs out of legs by 5000rpm.

I'm a V8 bogan at heart, love the sound and previously owned a VS 5ltr 5speed that had full suspension, mild mods that brought the power up to around 220kw at the flywheel.

My conclusion, in a not so perfect world the LS2 would 9 times out of 10 have it over the mild R32 or R33. Its obvious in how easy the LS2 is to get off the line clean compared to the vid of the R32.

Heres some realistic figures for a standard GTR :D

showphoto.php?photo=13820&size=big&cat=500

showphoto.php?photo=13811&size=big&cat=500

And I cannot understand the fasination with 0-100kmh times anyway, its far from a true indication of a cars true performance, to many low powered cars can return a half decent time due to lack of wheelspin and die in the arse after 100kmh, also 4WD cars (Such as stock GTR) can give seemingly fantastic 0-100kmh times again only to die in the arse afterwards.....

0-400m is a better indicator, as it gives distance and Terminal speed...and terminal speed is what I judge a cars overall accelarative abilities on :)

Oh and FTR my old RB30ET R31 with 253rwKW revving to 5500rpm ran 0-200kmh in under 15seconds (on the street) without really trying to hard, it also ran 100-200kmh in 5th with 208rwKWs in 12 seconds :aroused:

Hey mate, I love hsv and holdens can't beat the sound of a v8!! I am a gts-t owner lol. My 95 R33 has a 3.5" stainless catback exhaust, a fmic (fairly large) and a hks mushroom pod. I have done my own 0 - 100 time on the street and did a 5.2 sec. In controlled environment and perfectly flat ground i think i could do a 5. Hope this helps. Dump pipe coming soon - hopefully 0 - 100 in the high 4's.

Timbo, sorry to burst your bubble mate but with the mods you mentioned you will not achieve much better than the 6.0/6.1 sec factory specs of the standard manual 'line.

When the factory goes out to determine the 0-100 time they spend many hours with a professional test driver about the size of a 13 year old, with minimum fuel in the tank and possibly all ancillaries removed from the boot, and they practice until perfect. Then they run a small number of sprints to 100 and take an average. All factories do this.

Auto magazines constantly compare the factory time against the best they can do in real world conditions, often with a passenger, and never come close.

Now maybe you can improve a little with the new exhaust and a cat replacement pipe, but at the same time the extra power will make it harder not to slip into wheelspin. Then you will have to spend on engine management, a decent turbo, good rubber, suspension (not the rock hard Jap stuff) as the standard stuff is nasty for axle tramp, pineapples to allow some rear squat and a good yet forgiving organic clutch that will allow some slip without burning up.

Given that a GTR does 4.7-4.9 factory figures you are looking at making some serious mumbo and just monstering it to get over the 5.0 second line. I have spent a fair bit of my life racing, and I think I'm fairly reasonable and consistent but I doubt my GTS25t track car would go under 5.0 even once the twin turbo setup is sorted with a target of 280rwkw.

Guys I think even mildly modded we're a long way from mowing the 6.0 as easy as everyone thinks.

We have a VX HSV coupe at work with a C5R block, cams and an eaton supercharger on it. This bloke has spent near $300 tho on it and I gotta say it is one of the coolest cars I've ever seen. It puts out about 400rwkw and it just sounds so nice. There's no substitute for cubes; unfortunately.

Not much is available in australia for the Ls2 yet. LS1 has been out for awhile so you can get a lot of mods for them and APS have twin turbo kits for the LS1.

LS2 edit is still being tested before release and is very anticipated.

Pro Charger built a bolt in kit for your motor in the C6 and www.dnamotorsport.com have done the LS1 and 5.4 Ford is in the shop.

Link is http://www.procharger.com/ we have a couple is Perth already.

The launch isn't the best as it bogs down a little, best 0-100 I was able to achieve was 5.2secs with a 4000rpm launch & clutch slip.

Often than not it was around the 5.5secs, if it wheel spun up around the 6sec mark.

 

Mild R32 - 164rwkw.

 

Compared to the 6ltr the RB20DET sounds a little Asmatic. :D

Damn LS2 6500rpm, thats pretty damn nice rev's.

 

   

Seriously is that the RB20, or ahem the RB20. I never look at the speedo, usually got my eyes pegged on the road/track, but im scared with 235rwkws my thing doesnt accelerate off the clock like that:(

Yours would spank it Roy. Maybe not through first but definitely through second. :)

Its definitely the RB20, RB30 doesn't rev like that.

It was taken 10,000km's before I pulled the motor out, still had excellent compression with no oil in the intake pipes, the inlet ports were still clean with no muck coating.

I noticed it looked as if the inlet ports had a coating of some sorts. Not so much shinny silver but a whiteish rough colour. Didn't really look like alloy.

Here's a little cleaner launch. Roughly 5.5secs to 100 also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...