Jump to content
SAU Community

Recommended Posts

Skyline model = R32 GT-R

Wheel diameter = 18"

Wheel width = 9.5"

Wheel offset = +22

Tyre size = 255/35/18 all round

Modifications to fit = none!

they are sparco racing wheels with a nice bit of dish...just thought id add that

Edited by Turbz_13
  • 2 weeks later...

Still nobody has answered this question. Can you fit R32 GTR rims on a R33 gtst??

Cheers

id also like to know this....atleast will they fit on rears? plus whats the widest tread you can fit on a r32 gtr rim?

to the above.. yes..

now for my new rims

Skyline model = R32 GTS-T lowered to guard 345mm front/rear

Wheel type = V35 standard rims (non track)

Wheel diameter = 17"

Wheel width =7.5" front/8" rear

Wheel offset =33(F), 30®

Tyre size = 215/55R17

Modifications to fit = front tyres scrub control arms.. requires lower profile tyres to fit fronts.

Ended up going for 235/45R17's for the fronts.. clearance is fine, however can scrub plastic guards on heavy bumps

  • 2 weeks later...

Skyline model = BNR32

Wheel Brand = O.E.M R33 GT-R

Wheel diameter = 17

Wheel width = 9

Wheel offset = 30

Tyre size = 235/45

Modifications to fit = None (naturally)

These wheels give really good clearance around the brake callipers, for anyone looking to go up in brake rotor size without having to use adaptors.

  • 2 weeks later...

Skyline model = SII R33 GTS-25t Sedan

Wheel Brand = Lenso GT-05

Wheel diameter = 18

Wheel width = 8(f), 8®

Wheel offset = +38

Tyre size = 225/40/R18, 235/40/R18 - Nankang NSII

Modifications to fit - Larger front rotors to increase space between caliper and spokes. Plus fill up that large gap between wheel and calipers :D.

These wheels will not fit over the front caliper without spacer or grinding the caliper. Ive gone to a 32GTR V-Spec disc (324mm x 30mm, a 28 mm increase in disc diameter) to clear the spokes.

Also i think people should be posting up brand and model of wheel so that others can see if their wheel of choice will fit over the front calipers.

cheers

Evil

Edited by EvilINGT

Hi guys i am looking at getting a set 19X10 racing hart cr wheels for my R33 GTR.

I wont the wheels to sit as close to the side guards as possible or even if they stick out just alittle, wondering if +20 is the offset i am looking for?

Thanks

Adam.

  • 2 weeks later...

First of all, please forgive my ignorance. I am new to this site and found it to be a great Forum and has great people!

This is a great thread and i've just gone through to read all the pages. Lots of info in there. However, not many people have posted offsets on a R34 GTT. I've got a question as per the person posted before me. Can a 18x9.5 +30 wheel fit onto my R34 GTT seriesII? My car is stock with standard wheels and suspension. I am looking at changing my wheels to one of the BEE-R/Nismo LM types.

With this settings, will I have any clearance/rubbing problems? even with full turns?

Lastly, has anyone heard about Rota wheels and where to get them in Australia? Thank you all in advance! Keep it coming! Cheers,Michael

  • 3 weeks later...

model = Cefiro A31

Wheel Brand = Work meisters S1's

Wheel diameter = 17

Wheel width = 8(f), 9®

Wheel offset = +30(f), +35®

Tyre size = 215/45/R17, 235/45/R17 -

Modifications to fit - chop a tiny bit of the right hand plastic guard. The fronts stick out about 4 mm.

  • 4 weeks later...

I have asked this before and got a "probably not answer"

But will ask again to see if anyone has tried...an R32 GTSt with 17x9 +22 offset rims. Guards are rolled and car is not that low. Im thining even if i put narrow and lower profile rubber on them????? Say 225/40 front and 255/40 rears etc.

Or am i simply no chance. Unfortunately the rims are interstate so cant trial fit before buying

Skyline model = R32 gts-t 4dr

Wheel diameter = 18"

Wheel width = F:8 R:9

Wheel offset = +30 all round

Tyre size = 235/40/18 all round

Modifications to fit = none on the back, lipped the guards on the front

ROY:

you should fit them on the front. ive got about 35mm of clearence to the guard with 18x8 +30, and you need an extra 20mm to fit 17x9 +22. so with the steering wheel straight they should fit.

the rears will fit cos they will stick out 8mm more than mine and ive got about 20mm clearance from the guard with 235/40R18s.

if your lip is gone, then 255/40R17 should fit, if not stretch 235/45R17

and you want 225/45R17 for the front, not 225/40R17

Edited by salad
I'm looking at a set of 18x9.5" rims with a +12 offset will these fit with out and mods to fit (r32 GT-R)? I know the +12 offset is getting a bit boarderline for 9.5" wide rims

Can anyone confirm this?

I've got 18x9.5's with a +13 offset front and rear. The rears on mine don't seem to be a problem, and the fronts only lightly rub on one of the tabs for the guard liner when under heaps of load, or with more than 1 person in the car. A lot of that probably has to do with my suspension having HEAPS of travel, so with some stiff coilovers, the problems should disappear.

Incidently, tyres are 245/45/18's.

Skyline model = 1989 R32 GT-R

Wheel Brand = Work Emotion XT7

Wheel diameter = 18"

Wheel width = 9.5"

Wheel offset = 20

Tyre size = 245/40/18

Modifications to fit = None.

Car is quite low, as low as a set of super low springs if you had them. ( I have Teins)

32GTR1.jpg

32GTR2.jpg

Skyline model = 1996 R33 GT-R V-Spec

Wheel Brand = Work Emotion XD9

Wheel diameter = 18"

Wheel width = 10"

Wheel offset = +18

Tyre size = 265/35/18

Modifications to fit = None

They sure do fill out the guards now :banana:

post-16627-1153453632.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...