Jump to content
SAU Community

Recommended Posts

Sorry, Forgot to post specs

Rhemac RB29 - destroked RB30 crank

Eagle H beam rods

CP forged pistons and rings

ACL race series bearings

CNC ported head

Ferrea 1mm stainless valves

HKS 264 10.2mm step 2 intake cam

HKS 272 10.2mm step 2 exhaust cam

Bronze valve guides

ACL 1.2mm MLS head gasket

Gates adjustable timing gears

Tomei oil restrictor

Greddy Oil pump

ATI balancer

HKS 25/30 with HKS actuators

HKS pod filters 

Xspurtz 1550cc injectors on factory fuel rail

Turbosmart Fuel regulator

Twin Walbro 460LHP pumps

OS Giken triple plate clutch

100mm Blitz intercooler

custom 4" exhaust

Tech edge 2J9 wideband O2 sensor

Haltech Eflex fuel sensor

Vipec V88 ECU

Trent @ Chequered Tuning E85 and 98 Octane tuned

E85 - 481rwKW; 775Nm @4900 rpm

98 Octane - 431 rwKW; 662Nm@5404

 

Responsive?  

 

 

 

 

 

On 23/08/2016 at 9:03 PM, tangomatt said:

Sorry, Forgot to post specs

Rhemac RB29 - destroked RB30 crank

Eagle H beam rods

CP forged pistons and rings

ACL race series bearings

CNC ported head

Ferrea 1mm stainless valves

HKS 264 10.2mm step 2 intake cam

HKS 272 10.2mm step 2 exhaust cam

Bronze valve guides

ACL 1.2mm MLS head gasket

Gates adjustable timing gears

Tomei oil restrictor

Greddy Oil pump

ATI balancer

HKS 25/30 with HKS actuators

HKS pod filters 

Xspurtz 1550cc injectors on factory fuel rail

Turbosmart Fuel regulator

Twin Walbro 460LHP pumps

OS Giken triple plate clutch

100mm Blitz intercooler

custom 4" exhaust

Tech edge 2J9 wideband O2 sensor

Haltech Eflex fuel sensor

Vipec V88 ECU

Trent @ Chequered Tuning E85 and 98 Octane tuned

E85 - 481rwKW; 775Nm @4900 rpm

98 Octane - 431 rwKW; 662Nm@5404

 

Responsive?  

Did this car used to belong to Mark from Rhemac?

 

 

 

 

 

The Borg Warner thread got shut down so I'll post here for those interested.

 

BW EFR 8374

Stock bottom end rb26

256 cams

E85

504kw - 30psi around 4600rpm.

Has another 30-40kw in it. I told him to stop at 30psi due to standard bottom end.

Screenshot_20160901-181732.png

  • Like 5
18 hours ago, usmair said:

The Borg Warner thread got shut down so I'll post here for those interested.

 

BW EFR 8374

Stock bottom end rb26

256 cams

E85

504kw - 30psi around 4600rpm.

Has another 30-40kw in it. I told him to stop at 30psi due to standard bottom end.

Screenshot_20160901-181732.png

got any plans to race it?

  • 2 weeks later...

r34nur

stock engine

gtx3576 0.82a/r

walbro 450

id1300

260kw@18psi n1 turbo 98 fuel

310kw@18psi gtx3576 ( same boost response as n1s) 98 fuel

287kw@14psi gtx3576 e85

346kw@20psi gtx3576 e85 (tuned boost build a bit slower then 98 tune, cause I don't want boost spike)

 

 

 

 

 

image.jpeg

image.jpeg

  • 2 weeks later...

Model/Make: 2002 R34 GT-R M-Spec

Mileage: 110,000 kms

Output

320rwkw / 430rwhp

 

Head / Turbo 

- Garrett 2860-9s - fitted with HKS oil feed restrictor banjo bolts

- Garrett 1bar actuators

- Tomei dump pipes

- Standard cast manifold - Port matched to turbos

- Tomei Poncam Type A - lifter shim clearance within OE spec

- Jun adjustable cam gears (OR gears modified to be adjustable) - set to 0deg/0deg

ECU/AFMs

- Apexi Power FC

- Nismo AFMs

Cooling

- Plazmaman Pro Series 76mm intercooler

- Koyorad 48mm aluminium radiator

- Trust 13 row oil cooler with filer relocation kit

Exhaust / Intake

- Amuse R1 Titan Extra cat-back exhaust 90mm

- Apexi Super Catalyzer Cat - 80mm

- Mines Pro front pipe (2 x 70mm into 80mm)

- Nismo inlet piping

- OE Airbox with Nismo panel filter and snorkel

Ignition / Fuel

- Sard 650cc top-feed Injectors

- Splitfire coilpacks

- Wiring specialties coilpack harness

- Nismo 255L fuel pump

- Denso iridium spark plugs

 

MRC Dyno 2.9.16 - 320kw.JPG

Engine 30.9.16.jpg

 

FB_IMG_1475214937452.jpg

Edited by squareznboxez
  • Like 4
  • 4 weeks later...

I've posted this in a separate thread earlier this year. I do have to go back and retune again as brand new power FC boost controller did not work again so we ended up running it on manual boost controller. I will probably dump PFC altogether and try "Link G4 ECU"  plus play with cams/gears--currently set at zero. My main question is, what are some general boost levels that many of you run on your cars? I plan on running this motor regularly at 22-25psi.. car will only be used for couple of monthly coffee meets and occasional evening night rider passes.. along with few drift events each year.

Most importantly, I'm thinking of dumping the brand new GTX3582 for an EFR8374 rear 1/05 a/r divided housing in hopes for quicker spool and more power at the same boost level. Can anyone share their experience with 8374 in comparison to my set up? I hear 700whp should be no problem and that's my ultimate target goal.

Any feedback is greatly appreciated!

Set up is as follows in S13 chassis:

Mildly built R33 (pistons, rods, upgraded oil pump, HG, head studs, tomei poncams type B

ID1000cc injectors running power FC d-jetro

e85 race gas

all the misc bolt-on's you can think off

running GTX3582R, .82 rear T4 undivided with two 50mm gates

Here is what it made at 22-23psi..

post-85838-0-57047600-1454108823.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...