Jump to content
SAU Community

Recommended Posts

Sorry, Forgot to post specs

Rhemac RB29 - destroked RB30 crank

Eagle H beam rods

CP forged pistons and rings

ACL race series bearings

CNC ported head

Ferrea 1mm stainless valves

HKS 264 10.2mm step 2 intake cam

HKS 272 10.2mm step 2 exhaust cam

Bronze valve guides

ACL 1.2mm MLS head gasket

Gates adjustable timing gears

Tomei oil restrictor

Greddy Oil pump

ATI balancer

HKS 25/30 with HKS actuators

HKS pod filters 

Xspurtz 1550cc injectors on factory fuel rail

Turbosmart Fuel regulator

Twin Walbro 460LHP pumps

OS Giken triple plate clutch

100mm Blitz intercooler

custom 4" exhaust

Tech edge 2J9 wideband O2 sensor

Haltech Eflex fuel sensor

Vipec V88 ECU

Trent @ Chequered Tuning E85 and 98 Octane tuned

E85 - 481rwKW; 775Nm @4900 rpm

98 Octane - 431 rwKW; 662Nm@5404

 

Responsive?  

 

 

 

 

 

On 23/08/2016 at 9:03 PM, tangomatt said:

Sorry, Forgot to post specs

Rhemac RB29 - destroked RB30 crank

Eagle H beam rods

CP forged pistons and rings

ACL race series bearings

CNC ported head

Ferrea 1mm stainless valves

HKS 264 10.2mm step 2 intake cam

HKS 272 10.2mm step 2 exhaust cam

Bronze valve guides

ACL 1.2mm MLS head gasket

Gates adjustable timing gears

Tomei oil restrictor

Greddy Oil pump

ATI balancer

HKS 25/30 with HKS actuators

HKS pod filters 

Xspurtz 1550cc injectors on factory fuel rail

Turbosmart Fuel regulator

Twin Walbro 460LHP pumps

OS Giken triple plate clutch

100mm Blitz intercooler

custom 4" exhaust

Tech edge 2J9 wideband O2 sensor

Haltech Eflex fuel sensor

Vipec V88 ECU

Trent @ Chequered Tuning E85 and 98 Octane tuned

E85 - 481rwKW; 775Nm @4900 rpm

98 Octane - 431 rwKW; 662Nm@5404

 

Responsive?  

Did this car used to belong to Mark from Rhemac?

 

 

 

 

 

The Borg Warner thread got shut down so I'll post here for those interested.

 

BW EFR 8374

Stock bottom end rb26

256 cams

E85

504kw - 30psi around 4600rpm.

Has another 30-40kw in it. I told him to stop at 30psi due to standard bottom end.

Screenshot_20160901-181732.png

  • Like 5
18 hours ago, usmair said:

The Borg Warner thread got shut down so I'll post here for those interested.

 

BW EFR 8374

Stock bottom end rb26

256 cams

E85

504kw - 30psi around 4600rpm.

Has another 30-40kw in it. I told him to stop at 30psi due to standard bottom end.

Screenshot_20160901-181732.png

got any plans to race it?

  • 2 weeks later...

r34nur

stock engine

gtx3576 0.82a/r

walbro 450

id1300

260kw@18psi n1 turbo 98 fuel

310kw@18psi gtx3576 ( same boost response as n1s) 98 fuel

287kw@14psi gtx3576 e85

346kw@20psi gtx3576 e85 (tuned boost build a bit slower then 98 tune, cause I don't want boost spike)

 

 

 

 

 

image.jpeg

image.jpeg

  • 2 weeks later...

Model/Make: 2002 R34 GT-R M-Spec

Mileage: 110,000 kms

Output

320rwkw / 430rwhp

 

Head / Turbo 

- Garrett 2860-9s - fitted with HKS oil feed restrictor banjo bolts

- Garrett 1bar actuators

- Tomei dump pipes

- Standard cast manifold - Port matched to turbos

- Tomei Poncam Type A - lifter shim clearance within OE spec

- Jun adjustable cam gears (OR gears modified to be adjustable) - set to 0deg/0deg

ECU/AFMs

- Apexi Power FC

- Nismo AFMs

Cooling

- Plazmaman Pro Series 76mm intercooler

- Koyorad 48mm aluminium radiator

- Trust 13 row oil cooler with filer relocation kit

Exhaust / Intake

- Amuse R1 Titan Extra cat-back exhaust 90mm

- Apexi Super Catalyzer Cat - 80mm

- Mines Pro front pipe (2 x 70mm into 80mm)

- Nismo inlet piping

- OE Airbox with Nismo panel filter and snorkel

Ignition / Fuel

- Sard 650cc top-feed Injectors

- Splitfire coilpacks

- Wiring specialties coilpack harness

- Nismo 255L fuel pump

- Denso iridium spark plugs

 

MRC Dyno 2.9.16 - 320kw.JPG

Engine 30.9.16.jpg

 

FB_IMG_1475214937452.jpg

Edited by squareznboxez
  • Like 4
  • 4 weeks later...

I've posted this in a separate thread earlier this year. I do have to go back and retune again as brand new power FC boost controller did not work again so we ended up running it on manual boost controller. I will probably dump PFC altogether and try "Link G4 ECU"  plus play with cams/gears--currently set at zero. My main question is, what are some general boost levels that many of you run on your cars? I plan on running this motor regularly at 22-25psi.. car will only be used for couple of monthly coffee meets and occasional evening night rider passes.. along with few drift events each year.

Most importantly, I'm thinking of dumping the brand new GTX3582 for an EFR8374 rear 1/05 a/r divided housing in hopes for quicker spool and more power at the same boost level. Can anyone share their experience with 8374 in comparison to my set up? I hear 700whp should be no problem and that's my ultimate target goal.

Any feedback is greatly appreciated!

Set up is as follows in S13 chassis:

Mildly built R33 (pistons, rods, upgraded oil pump, HG, head studs, tomei poncams type B

ID1000cc injectors running power FC d-jetro

e85 race gas

all the misc bolt-on's you can think off

running GTX3582R, .82 rear T4 undivided with two 50mm gates

Here is what it made at 22-23psi..

post-85838-0-57047600-1454108823.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...