Jump to content
SAU Community

Recommended Posts

You are missing the fact that in victoria you are guilty untill you prove you are innocent, might sound a little sceptical but when you look at things like an epa notice for noise and emissions, they make you prove your innocence, if you dont prove it your automatically guilty (if you dont get it tested and cleared you get fined), the cops do what ever they like and its up to you to prove they are wrong.

And if you prove them wrong, you will most likely still have to pay $$ lol.

And if you prove them wrong, you will most likely still have to pay $$ lol.

$43 for a noise test........

And if you get a major the dollars and time pile up............

How else do you think the government makes any money? considering they have sold all of our utilities to private companies now. The government doesn't have any assets! So what do they do? Charge us more!

Anyway, perhaps we need to go back on topic? :D

cheers for that,

Q:

reinforce, bit of 1mm scrap with same hole drilled on tacked/ stitched welded on underneath or exhaust tube type reinforce ?

wondering if this would be a common thing cops would defect and rwc would pass in the same state....

thanks

1mm won't be enough. Some small steel reo bar type thing will be fine.

Once you get defected, then get it engineered. I see no value in spending $600 on engineers for a hole like that until you get caught... BUT... if you reinforce it, show the cops, you might be left alone and never have to worry about it. IF you do, you've already done it and it's a simple fix (engineers).

I asked Nissan what the clearance should be and they said "100mm". So I'm not sure where this adage/myth of 'height of a Coke can' comes from?

Standard Coke cans are 130mm unless they are referring to mini Coke cans.

A rule of thumb is to check every thing you read on forums, a lot of it will be right but if it is wrong it's your arse in the line, I have seen lots of wrong advice handed out as a fact, really makes me wanna kick those people in the nuts!

hey guys got defected today :( thats all good .......... just he took pictures of catchcan (aftermarket drift brand) and didnt like how i attatched a breather to the end of the hose. and my pod filter......so my question is when they take photos...what is the purpose? are they going to investigate it? decide to epa me? just curious it was a highway patrol and he knew a lot of things....

just he took pictures of catchcan (aftermarket drift brand) and didnt like how i attatched a breather to the end of the hose.

Catch cans must be recirculating, properly made catch cans, or oil/air separators (which is what they are there for) will do the job fine when plumbed back.

Edited by W0rp3D

Take photo's as evidence of the mods.

You will get an EPA in the mail most likely.

well i got a epa in the mail today emmissions and noise.. fml..

gonna go test it see if i pass with upgraded turbo(gt2876r), r32 gtr injectors, z32, dr drift remap.. everything else is stock ....not worth it?

well i got a epa in the mail today emmissions and noise.. fml..

gonna go test it see if i pass with upgraded turbo(gt2876r), r32 gtr injectors, z32, dr drift remap.. everything else is stock ....not worth it?

lol definitely won't pass.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...