Jump to content
SAU Community

Recommended Posts

lol... you want past experience?

Wait until the officer drives off and then pull the defect sticker off right away OR as soon as you get home.

Then just sticky tape it on once it dries (or just wipe the glue off and tape it on). It's only illegal to not display it... Says nothing about taking it off and immediately re-affixing so it's not a massive pain in the ass later!

That's true experience for ya :merli:

Lol I did this, except in front of the cop, I had tape with me and he said its fine lol

Yeh went into hillside after finding it lol that moved back from burwood hwy. They can't fit me in soon is the problem. Email and rang EPA for extension but I just would rather get it cleared asap.

It's for an R33 GTST out of curiosity what difference does that make? different hangars or something for exhaust?

Edited by jukic.j

Hanger points are the same gtst to gtr. Only difficulty you may find is trying to fit a gtst specific exhaust onto a gtr because as we have found out trying to put my super drager onto grants R the curve of the rear section isn't designed to clear the subframe brace so it fouls against it.

I believe it's that hangers/points where it attaches that are different, but I could be wrong about this. I have a 33gtst full stock exhaust you could possibly borrow mate?

34/33 (non gtr) have the same 4 hanger points.

just some minor differences in the muffler and pipe itself.

Ah the Hume Camera's have been on since Aug, so probably caught speeding then come processing time - system realises it was suspended.

That is amusing failboat at it's best

Yup came with a speeding fine too. whatta fail

  • 4 weeks later...
  • 2 weeks later...

now i've got question which i cant seem to get a straight answer for.

can i notch castor rod mounts ( think of s13 ones, they bolt up to the rad support and chassis rails under the engine bay) as in cut a section out and weld in a bit of thick angle or C channel to clear something ?

kinda like this

==========\ /=======|

..........................\/..................| <----- side view

====================

( couldn't center it with out the full stops)

called up some auto engineers off the vic roads site and cant get a straight answer and my rwc guy is away sick

thanks

Edited by Dan_J

lol Nik, love it - and i do agree given the "level of effort" factor. :thumbsup:

Slightly not so simple answer:

No - without VASS approval.
Conditional Yes - with VASS approval (Engineers Cert) - but you MUST talk to them BEFORE doing it to understand their requirements.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...